Single-Atom Metal Sites Anchored Hydrogen-Bonded Organic Frameworks for Superior “Two-In-One” Photocatalytic Reaction

Photoredox catalysis is a green solution for organics transformation and CO₂ conversion into valuable fuels, meeting the challenges of sustainable energy and environmental concerns. However, the regulation of single-atomic active sites in organic framework not only influences the photoredox performance, but also limits the understanding of the relationship for photocatalytic selective organic conversion with CO₂ valorization into one reaction system. As a prototype, different single-atomic metal (M) sites (M²⁺ = Fe²⁺, Co²⁺, Ni²⁺, Cu²⁺, and Zn²⁺) in hydrogen-bonded organic frameworks (M-HOF) backbone with bridging structure of metal-nitrogen are constructed by a typical “two-in-one” strategy for superior photocatalytic C N coupling reactions integrated with CO₂ valorization. Remarkably, Zn-HOF achieves 100% conversion of benzylamine oxidative coupling reactions, 91% selectivity of N-benzylidenebenzylamine and CO₂ conversion in one photoredox cycle. From X-ray absorption fine structure analysis and density functional theory calculations, the superior photocatalytic performance is attributed to synergic effect of atomically dispersed metal sites and HOF host, decreasing the reaction energy barriers, enhancing CO₂ adsorption and forming benzylcarbamic acid intermediate to promote the redox recycle. This work not only affords the rational design strategy of single-atom active sites in functional HOF, but also facilitates the fundamental insights upon the mechanism of versatile photoredox coupling reaction systems.     

Phase equilibria and microstructure development in Mg-rich Mg-Gd-Sr alloys: Experiments and CALPHAD assessment

Mg-Sr alloys are promising to fabricate orthopedic implants. The alloying of rare earth elements such as Gd may improve the comprehensive mechanical properties of Mg-Sr alloys. The information on the phase diagram and the microstructure development are required to design chemical composition and microstructure of Gd alloyed Mg-Sr alloys. The phase equilibria and the microstructure development in Mg-rich Mg-Gd-Sr alloys (Gd, Sr < 30 at. %) are experimentally investigated via phase identification, chemical analysis, and microstructure observation with respect to the annealed ternary alloys. The onset temperatures of liquid formation are measured by differential scanning calorimetry. A thermodynamic database of the Mg-rich Mg–Gd–Sr ternary system is developed for the first time via CALPHAD (CALculation of PHAse Diagram) approach assisted by First-Principles calculations. The thermodynamic calculations with the developed database enable a well reproduction of the experimental findings and the physical-metallurgical understanding of the microstructure formation in solidification and annealing.     

2D Bi2O2Te Semiconductor with Single-Crystal Native Oxide Layer

Following logic in the silicon semiconductor industry, the existence of native oxide and suitable fabrication technology is essential for 2D semiconductors in planar integronics, which are surface-sensitive to typical coating technologies. To date, very few types of integronics are found to possess this feature. Herein, the 2D Bi₂O₂Te developed recently is reported to possess large-area synthesis and controllable thermal oxidation behavior toward single-crystal native oxides. This shows that surface-adsorbed oxygen atoms are inclined to penetrate across [Bi₂O₂]_n²ⁿ⁺ layers and bond with the underlying [Te]_n²ⁿ⁻ at elevated temperatures, transforming directly into [TeO₄]_n²ⁿ⁻ with the basic architecture remaining stable. The oxide can be adjusted to form in an accurate layer-by-layer manner with a low-stress sharp interface. The native oxide Bi₂TeO₆ layer (bandgap of ≈2.9 eV) exhibits visible-light transparency and is compatible with wet-chemical selective etching technology. These advances demonstrate the potential of Bi₂O₂Te in planar-integrated functional nanoelectronics such as tunnel junction devices, field-effect transistors, and memristors.     

Design of Online Vitals Monitor by Integrating Big Data and IoT

In this work, we design a multisensory IoT-based online vitals monitor (hereinafter referred to as the VITALS) to sense four bedside physiological parameters including pulse (heart) rate, body temperature, blood pressure, and peripheral oxygen saturation. Then, the proposed system constantly transfers these signals to the analytics system which aids in enhancing diagnostics at an earlier stage as well as monitoring after recovery. The core hardware of the VITALS includes commercial off-the-shelf sensing devices/medical equipment, a powerful microcontroller, a reliable wireless communication module, and a big data analytics system. It extracts human vital signs in a pre-programmed interval of 30 min and sends them to big data analytics system through the WiFi module for further analysis. We use Apache Kafka (to gather live data streams from connected sensors), Apache Spark (to categorize the patient vitals and notify the medical professionals while identifying abnormalities in physiological parameters), Hadoop Distributed File System (HDFS) (to archive data streams for further analysis and long-term storage), Spark SQL, Hive and Matplotlib (to support caregivers to access/visualize appropriate information from collected data streams and to explore/understand the health status of the individuals). In addition, we develop a mobile application to send statistical graphs to doctors and patients to enable them to monitor health conditions remotely. Our proposed system is implemented on three patients for 7 days to check the effectiveness of sensing, data processing, and data transmission mechanisms. To validate the system accuracy, we compare the data values collected from established sensors with the measured readouts using a commercial healthcare monitor, the Welch Allyn® Spot Check. Our proposed system provides improved care solutions, especially for those whose access to care services is limited.     

Optimization of Quantum Cost for Low Energy Reversible Signed/Unsigned Multiplier Using Urdhva-Tiryakbhyam Sutra

One of the elementary operations in computing systems is multiplication. Therefore, high-speed and low-power multipliers design is mandatory for efficient computing systems. In designing low-energy dissipation circuits, reversible logic is more efficient than irreversible logic circuits but at the cost of higher complexity. This paper introduces an efficient signed/unsigned 4 × 4 reversible Vedic multiplier with minimum quantum cost. The Vedic multiplier is considered fast as it generates all partial product and their sum in one step. This paper proposes two reversible Vedic multipliers with optimized quantum cost and garbage output. First, the unsigned Vedic multiplier is designed based on the Urdhava Tiryakbhyam (UT) Sutra. This multiplier consists of bitwise multiplication and adder compressors. Compared with Vedic multipliers in the literature, the proposed design has a quantum cost of 111 with a reduction of 94% compared to the previous design. It has a garbage output of 30 with optimization of the best-compared design. Second, the proposed unsigned multiplier is expanded to allow the multiplication of signed numbers as well as unsigned numbers. Two signed Vedic multipliers are presented with the aim of obtaining more optimization in performance parameters. DesignI has separate binary two’s complement (B2C) and MUX circuits, while DesignII combines binary two’s complement and MUX circuits in one circuit. DesignI shows the lowest quantum cost, 231, regarding state-of-the-art. DesignII has a quantum cost of 199, reducing to 86.14% of DesignI. The functionality of the proposed multiplier is simulated and verified using XILINX ISE 14.2.     

Adaptive Window Based 3-D Feature Selection for Multispectral Image Classification Using Firefly Algorithm

Feature extraction is the most critical step in classification of multispectral image. The classification accuracy is mainly influenced by the feature sets that are selected to classify the image. In the past, handcrafted feature sets are used which are not adaptive for different image domains. To overcome this, an evolutionary learning method is developed to automatically learn the spatial-spectral features for classification. A modified Firefly Algorithm (FA) which achieves maximum classification accuracy with reduced size of feature set is proposed to gain the interest of feature selection for this purpose. For extracting the most efficient features from the data set, we have used 3-D discrete wavelet transform which decompose the multispectral image in all three dimensions. For selecting spatial and spectral features we have studied three different approaches namely overlapping window (OW-3DFS), non-overlapping window (NW-3DFS) adaptive window cube (AW-3DFS) and Pixel based technique. Fivefold Multiclass Support Vector Machine (MSVM) is used for classification purpose. Experiments conducted on Madurai LISS IV multispectral image exploited that the adaptive window approach is used to increase the classification accuracy.     

Android IoT Lifelog System and Its Application to Motion Inference

In social science, health care, digital therapeutics, etc., smartphone data have played important roles to infer users’ daily lives. However, smartphone data collection systems could not be used effectively and widely because they did not exploit any Internet of Things (IoT) standards (e.g., oneM2M) and class labeling methods for machine learning (ML) services. Therefore, in this paper, we propose a novel Android IoT lifelog system complying with oneM2M standards to collect various lifelog data in smartphones and provide two manual and automated class labeling methods for inference of users’ daily lives. The proposed system consists of an Android IoT client application, an oneM2M-compliant IoT server, and an ML server whose high-level functional architecture was carefully designed to be open, accessible, and internationally recognized in accordance with the oneM2M standards. In particular, we explain implementation details of activity diagrams for the Android IoT client application, the primary component of the proposed system. Experimental results verified that this application could work with the oneM2M-compliant IoT server normally and provide corresponding class labels properly. As an application of the proposed system, we also propose motion inference based on three multi-class ML classifiers (i.e., k nearest neighbors, Naive Bayes, and support vector machine) which were created by using only motion and location data (i.e., acceleration force, gyroscope rate of rotation, and speed) and motion class labels (i.e., driving, cycling, running, walking, and stilling). When compared with confusion matrices of the ML classifiers, the k nearest neighbors classifier outperformed the other two overall. Furthermore, we evaluated its output quality by analyzing the receiver operating characteristic (ROC) curves with area under the curve (AUC) values. The AUC values of the ROC curves for all motion classes were more than 0.9, and the macro-average and micro-average ROC curves achieved very high AUC values of 0.96 and 0.99, respectively.     

Association Rule Mining Frequent-Pattern-Based Intrusion Detection in Network

In the network security system, intrusion detection plays a significant role. The network security system detects the malicious actions in the network and also conforms the availability, integrity and confidentiality of data information resources. Intrusion identification system can easily detect the false positive alerts. If large number of false positive alerts are created then it makes intrusion detection system as difficult to differentiate the false positive alerts from genuine attacks. Many research works have been done. The issues in the existing algorithms are more memory space and need more time to execute the transactions of records. This paper proposes a novel framework of network security Intrusion Detection System (IDS) using Modified Frequent Pattern (MFP-Tree) via K-means algorithm. The accuracy rate of Modified Frequent Pattern Tree (MFPT)-K means method in finding the various attacks are Normal 94.89%, for DoS based attack 98.34%, for User to Root (U2R) attacks got 96.73%, Remote to Local (R2L) got 95.89% and Probe attack got 92.67% and is optimal when it is compared with other existing algorithms of K-Means and APRIORI.     

考虑负效应的垃圾回收两级选址-路径模型与算法

针对生活垃圾中转站和焚烧站的选址-路径问题（LRP）,考虑经济目标和垃圾设施的负面影响,设计了与风向和距离有关的负效应分段函数,构建了两级多目标选址-路径（2E-MOLRP）模型,并提出了鲸鱼优化算法（WOA）和模拟退火（SA）算法结合的非支配算法WOA-SA。首先,结合随机方法与Clarke和Wright(CW)节约算法优化初始种群;其次,采用非线性动态惯性权重系数调整收敛速度;然后,设计WOA-SA的并行结构来增强全局搜索能力;最后,使用非支配排序法得到帕累托解集。对Prins和Barreto等35个基准案例以及天津市模拟案例进行分析。结果表明,WOA-SA可以找到20个基准案例的已知最优解（BKS）,且对Prins和Barreto案例的求解结果与BSK差距的平均值分别为0.37%和0.08%,具有很好的收敛性和稳定性。将所提模型和算法应用于实例,给决策者提供了三种不同方案的负效应值及经济成本的方案,以支持不同偏好决策者选择,从而减少垃圾回收物流成本和设施对环境的负面影响。     

A polarization modulated directional backlight autostereoscopic display

A polarization modulated directional backlight autostereoscopic display is proposed and demonstrated. The system consists of the orthogonally polarized backlight, the Fresnel lens array, a light shaping diffuser film, and a liquid crystal display (LCD) with a microphase retardation film. The autostereoscopic image pair carried by the directional light with different polarization directions is simultaneously projected to different spatial directions. The simulation and experimental results show that the directional projection of parallax images is realized for a high-quality autostereoscopic display with large viewing angle and continuous viewing volume, hence making it suitable for practical applications.