变压器有载合闸过程中故障分闸后铁心剩磁分析

通过有载合闸变压器模型,分析了变压器有载合闸过程中由于副边突然短路导致主保护动作时电流和磁通的暂态过程,并对变压器铁心内的剩磁作了定性的分析。     

高速供送螺杆动态性能评价体系的建构

随着设备高速化的日益发展，传统的螺杆设计方法及相应的供送特性评价体系已显落后。参照蜗型凸轮动力学性能的评价方法，建立了高速供送螺杆的动态性能评价体系，为高速化供送螺杆的设计提供了性能参照指标。     

Organosoluble and light-colored fluorinated polyimides derived from 2,3-bis(4-amino-2-trifluoromethylphenoxy)naphthalene and aromatic dianhydrides

A novel fluorinated bis(ether amine) monomer, 2,3-bis(4-amino-2-trifluoromethylphenoxy)naphthalene, was prepared through the nucleophilic aromatic substitution reaction of 2-chloro-5-nitrobenzotrifluoride and 2,3-dihydroxynaphthalene in the presence of potassium carbonate, followed by catalytic reduction with hydrazine and Pd/C. A series of new fluorine-containing polyimides having inherent viscosities of 0.54 to 1.10 dl/g were synthesized from the diamine with various commercially available aromatic dianhydrides using a standard two-stage process with thermal imidization of poly(amic acid) films. These polyimides were highly soluble in a variety of organic solvents, and most of them afforded transparent, light-colored, and tough films with good tensile strengths. These polyimides exhibited glass transition temperatures (T_gs) of 247-300 °C and showed no significant decomposition below 500 °C under either nitrogen or air atmosphere. Except for the polyimide derived from pyromellitic dianhydride, the polyimide films were almost colorless, with an ultraviolet-visible absorption cutoff wavelength below 400 nm and low b∗ values (a yellowness index) of 10.7-41.9. These polyimides had dielectric constants of 3.09 to 3.65 (1 MHz) and moisture absorptions in the range of 0.2-0.3 wt%.     

导磁不锈钢毛的结构化研究

研制了一种新型的结构化钢毛——胶结钢毛。和传统的普通钢毛相比,胶结钢毛具有很强的结构刚度和很低的钢毛流失量;同时,对高岭土有较高的除铁效率。     

Cu－MnO_2同槽电解半工业试验研究

提出了Ｃｕ－ＭｎＯ＿２同槽电解的新工艺，在同一电解槽同时得到电铜和电解二氧化锰两种产品，该新工艺具有低电耗、低酸雾污染和低酸耗等优点．     

Equivalent Conditions for Convergence of Splittings of Non-Hermitian Indefinite Matrices

We present some sufficient and necessary conditions for convergent splitting of a non-Hermitian indefinite matrix. Some sufficient conditions to determinate a matrix with a (strongly) dominant symmetric part for a class of boundary value problem are also obtained. These results are applicable to identify the convergence of iterative methods for solving large sparse systems of linear equations.     

主动约束层阻尼板结构动力学建模研究

将有限元法和GHM法相结合，给出了建立主动约束层阻尼（ACLD）板结构动力学模型的新方法。建模时，考虑到粘弹材料（VEM）的纵向位移影响，采用GHM方法描述VEM的本构关系，解决了VEM的力学特性随温度和频率变化的难点，避免因VEM的复杂本构关系而产生的微分积分方程。算例表明本文给出的建模方法是准确的，ACLD结构能够有效控制结构振动。     

钢锭零能少氧化均热轧制的研究

根据计算机的辅助分析,采用新的钢锭传搁、注后强制水冷却、垫铁脱模等工艺后,入炉钢锭的热焓已超过开坯轧制需要,利用普通均热炉代替钢锭保温车,可完全依靠到钢锭自身潜热与显热进行均热。对不同锭型与钢种采用经试验的最佳时间均热后再轧制,收与保温车均热钢锭直接轧制相同的效果。     

Experiments of Fast Learning with High Order Boltzmann Machines

This work reports the results obtained with the application of High Order Boltzmann Machines without hidden units to construct classifiers for some problems that represent different learning paradigms. The Boltzmann Machine weight updating algorithm remains the same even when some of the units can take values in a discrete set or in a continuous interval. The absence of hidden units and the restriction to classification problems allows for the estimation of the connection statistics, without the computational cost involved in the application of simulated annealing. In this setting, the learning process can be sped up several orders of magnitude with no appreciable loss of quality of the results obtained.     

部分种子成分的特征X射线在等效生物材料中衰减的测定

用Ｓｉ（Ｌｉ）探测器实现了Ｎａ、Ｍｇ、Ｓ、Ｃｌ的特征Ｘ射线在有机膜中的相对衰减以及与Ｏ、Ｋ元素的特征Ｘ射线能量相当的Ｘ射线或轫致辐射在有机膜中的相对衰减，分别得出了它们减的数学描述，并把实验得到不同能量的Ｘ射线在有机膜中的质量吸收系数与Ｂｅｒｋｅｌｅｙ的ＯＣＧ软件计算出的结果相比，相关都小于３０％。