Interfacial energy and match of cold pressure welded Ag/Ni and Al/Cu

The technology of cold pressure welding was adopted to achieve the bonding of Al/Cu(limited soluble and forming compounds),Ag/Ni(hardly mutual soluble),and the relative state of interface was tested by HREM.The results indicate that stable interface is always corresponding to the low interfacial energy value;the stable interface is not coherent but partly-coherent because of the twisting of grain boundary caused by pressure,meanwhile existing dislocation.Namely,the interfacial match and other states under the condition of cold pressure welding are different from the situation that under the condition of thermal action.Moreover,theoretical analyses and calculation on the base of thermodynamics,crystallogeny ,solid physics etc,were discussed.     

压力容器环缝焊接自动跟踪系统的研究

作者研制了一种新型摆动式电弧传感器及其焊缝自动跟踪系统。采用计算机控制，成功地应用于压力容器的环缝脉冲ＭＡＧ焊工艺。实践证明采用这种系统跟踪精度高并获得了优质焊缝。     

埋弧自动焊在大口径钢卷管焊接上的应用

为把埋弧焊应用在大口径钢卷管焊接上,分析了焊接工艺设计、焊接工装设计和纵缝、环缝焊接的施工要点,经过实际施工验证了这种方法是成功的,效益是高的。     

磁粉探伤焊缝区反常显示成因分析

研究了中碳钢焊缝区磁粉探伤出现的假磁痕,对焊接过程和焊缝组织进行分析,制订出合理的焊接工艺,避免表面缺陷检测的误判。     

药芯焊丝气体保护焊在高压Cr-Mo钢管上的应用

采用钨极惰性气体保护焊(GTAW)打底与药芯焊丝气体保护焊(FCAW)填充、盖面的焊接方法对ASME SA-335 P22和ASME SA-335 P11钢管做了焊接工艺评定。分别对其焊缝进行了拉伸、弯曲、冲击和硬度检测等力学性能试验，并通过金相照片对焊缝的微观组织进行了分析，结果证明工艺评定焊缝的各项力学性能指标都达到了ASME Ⅸ的要求，该焊接方法在实际生产中是可行的。     

Microstructures and mechanical properties of welded Fe-12Cr-20Mn austenitic stainless steel

The effects of welding on the tensile and fatigue properties of fully annealed and cold-worked Fe-12Cr-20Mn austenitic stainless steel were evaluated. Room temperature and 500 °C tensile tests and room temperature cantilever beam fatigue tests were accomplished on specimens that contained autogenous bead-on-plate welds. The tensile and fatigue properties of the fully annealed material were not significantly influenced by welding. The tensile properties of the welded cold-worked material were also not significantly affected by the presence of a weldment. However, welding caused a large reduction of the fatigue life of the cold-worked material. Fatigue cracks preferentially initiated at large Mn-Si inclusions that formed in the fusion zones of the weldments.     

数字信号处理器DSP主控GMAW焊接

阐述了焊接过程信息数字处理控制思想，实际研究了数字信号处理器9DSP）在CO2气体保护焊机中的应用，将数字信号处理器（DSP）在送丝系统的柔性化调节，引弧和收弧模式，焊接参数的一元化自调节等方面的应用作了研究和试验，通过研究和样机试验，建立了一套焊接电源的数字化，信息化，柔性化控制平台，并探讨了数字信号处理器（DSP）在CO2焊接领域中的应用优点和前景，并提出了DSP主控GMAW焊接电源全系统框图，试验证明该系统工作稳定可靠，较好地满足了工艺性能，实现了焊机控制的数字化。     

单片机系统在焊接控制器中的应用

介绍2种单片机焊接控制器的功能参数及设计思路。一种采用80C196KB PSD311的16位总线结构；另一种采用89C52的8位总线结构。实践证明单片机系统是焊接设备中比较理想的控制器件。     

二辊轧机轧辊堆焊新技术应用

介绍了二辊粗轧机轧辊利用堆焊新技术开展堆焊修复试验与应用，并介绍了堆焊材料的选择、堆焊工艺以及取得的良好效果。     

化学冶金因素对埋弧焊焊缝硫磷含量的影响

通过试验和理论分析，探讨了在埋弧焊过程中，熔池中Ｓ，Ｐ的脱去过程，主要是以分别生成硫酸盐和磷酸盐的形式进行的化学冶金反应，并提出了熔池中的硫，磷脱去过程存在一个极限值，而这个极限值与焊剂的碱度和焊剂，焊丝及母材中的硫，磷含量有关。在焊剂碱度ＢＩ≥２．５的高碱度焊剂中，根据焊丝或焊剂中硫含量的不同，熔敷金属中硫的的极限值可低于焊丝中的硫含量或接近焊剂中的硫含量；而磷的极限值为０．０１０％±０．００２