浅述我国电液锤技术的发展与应用

通过对国外电液锤技术的引述，介绍了目前国内电液锤技术的发展与应用状况，并展望了电液锤发展前景。     

水力排烟机水轮叶片芯金属模的逆求工程设计

本文介绍了逆求工程技术在水力排烟水轮叶片芯金属模具设计中的具体应用，以及逆向工程的概念和集成系统组成。     

水泥原料矿山开采设备的现状和发展趋势

水泥工业作为原材料工业，正处于技术结构和产品结构调整期，作为水泥生产不可或缺的原料矿山，也正随着新型干法水泥的发展，逐渐从传统的小型化、分散化过渡到规模化、机械化，世界采矿设备的发展为我国水泥原料矿山采矿设备的技术进步带来了机遇。     

单组分聚脲材料在寒冷地区某大坝溢流面防护中的应用

水利水电工程泄洪建筑物表面经常遭受高速含沙水流或携带推移质的冲刷,经过一段时间的运行,往往会出现不同程度的磨损及气蚀破坏,采用性能优越的水工混凝土抗冲耐磨材料修复和防护尤为重要。本文通过单组分聚脲材料性能试验揭示了材料的特点,介绍了其在新疆某大坝溢流面防护中的应用情况,其处理技术对类似工程具有良好的借鉴意义。     

Evaluation of hydraulic excavator Human–Machine Interface concepts using NASA TLX

This study evaluated newly proposed Human–Machine Interface (HMI) design concepts for improving the ergonomics of hydraulic excavators. The design concepts were based on an augmented interaction technique which involved the use of heads-up display (HUD) and coordinated control as HMI elements. Two alternative HMI designs were elaborated in order to separately evaluate the ergonomic impacts of the head-up display and the coordinated control by comparing them to the standard HMI design. The effectiveness of these three HMI designs in terms of the reduction of the operators' mental and physical workload were assessed by conducting experiments utilizing human subjects, ages 23–35 years. The National Aeronautics and Space Administration's Task Load Index (NASA TLX) method was used for collecting subjective workload scores based on a weighted average of ratings of six factors: Mental Demand, Physical Demand, Temporal Demand, Own Performance, Effort, and Frustration Level. The results showed that the type of HMI design affects different aspects of the operator's workload. Indeed, it showed how the proposed augmented interaction is an effective solution for reducing the ergonomic gaps in terms of mental workload, and to a lesser extent the physical workload, subjected by the standard HMI design.     

注塑机的电液比例控制系统

本文介绍美国ＶａｎＤｏｒｎ塑机公司生产的５５吨注塑机的电液比例控制系统的组成，原理及特点；该系统集插装，负载传感功率匹配及计算机电液化比例控制等先进技术于一体，对国内新型注塑机的研究开发有一定参考价值，文末还就国内注塑机机械的制造和使用提出了建议。     

分离式双管板列管换热器的设计与制造

论述了双管板换热器材料选择、管板胀管槽等结构的设计、双管板检漏设计、最佳胀管压力计算等 ,以及双管板制造中内侧管子管板液压强度胀接、外侧管子管板强度焊接、双管板间空腔内和管子管板焊接接头气密性试验的要求     

Method of electrodialysis stack testing with the feed solution concentration regulation

A technique to test electrodialysis (ED) stacks designed to desalt dilute solutions is developed. The technique permits obtaining reproducible data on laboratory and medium-scale units useful for predicting mass transfer characteristics of large ED stacks. Quasi-steady state of desalination process is the main condition to obtain such data. This state can be attained by applying recycling hydraulic modes and special devices to maintain constant pH, or pH and concentration of the feed solution. To obtain data for scaling, it is necessary to apply a fixed voltage on the stack and to use a constant flow rate of the feed solution during the experiment, the feed solution concentration may vary with the time. Specifications of the stacks studied, rational hydraulic and electrical modes of testing are considered.     

液压仿真技术的应用与发展

本文在简单回顾液压仿真技术的发展之后,着重介绍了仿真技术及其在液压领域的应用,论述了液压建模与仿真技术的方法和几个关键问题,并从不同的侧面介绍了一些软件,最后综述了液压仿真技术未来的发展趋势。     

拟建鄱阳湖水利枢纽对湖区水环境容量的影响

采用水动力水质模型模拟了鄱阳湖在极端退水年(2016年)和一般退水年(2017年)两种退水工况下拟建鄱阳湖水利枢纽建设前后的水动力水质过程,并构建湖区水环境容量模型评估了鄱阳湖拟建水利枢纽对湖区水质和水环境容量的影响。模拟结果表明：枢纽建设运行能显著增加鄱阳湖的水体体积,每月最大可增加77%;在退水初期主要降低湖泊中部的TP质量浓度,在极端退水年的退水后期会导致闸上TP质量浓度升高,在一般退水年则会导致闸上TP质量浓度降低,但对COD_Mn和NH₃-N质量浓度空间分布无明显影响;在极端退水年,枢纽建设运行会导致COD_Mn、NH₃-N和TP质量浓度增大,而在一般退水年则会导致TP的质量浓度降低;枢纽建设运行能显著提升COD_Mn和NH₃-N的水环境容量,在一般退水年会增大TP的水环境容量,但在极端退水年TP的水环境容量可能降低。