考虑初始弯曲矩形薄壁钢管砼柱管壁屈曲分析

实际工程中的钢管都是有初始弯曲的,初始弯曲的存在会降低薄壁钢管混凝土柱的承载力.采用能量法对具有初始弯曲管壁的屈曲性能进行了分析,分析结果表明,初始弯曲的存在会使管壁的宽厚比降低30%左右.     

英屿沟Ⅱ号天桥的设计

为推广预应力混凝土箱梁结构在桥梁方面的应用研究,结合英屿沟Ⅱ号天桥实例,介绍了该组合结构在桥梁方面具体应用的设计思路,介绍了英屿沟Ⅱ号天桥波形钢腹板PC组合箱梁桥主梁结构、预应力体系、波形钢腹板、连接件、防腐、施工流程等的设计,为波形钢腹板PC组合箱梁结构应用于桥梁工程提供了设计经验.     

管道内穿管修复技术的应用

为解决城市地下金属管道由于常年连续运行时间长、防腐技术落后情况下产生漏铁、穿孔腐蚀等问题,阐述了利用管内穿管的先进技术解决地下管道的修复问题.该技术经应用后,施工质量满足使用要求,具有推广价值.     

新密市溱水路大桥波形钢腹板无背索斜拉桥总体设计

在桥型方案确定后,桥梁总体设计是设计者首先考虑的问题.新密市溱水路大桥波形钢腹板无背索斜拉桥的总体设计研究了桥梁结构受力特点,初拟了桥梁主要结构组成,对主体结构进行了初步的结构计算分析,并得出了初算成果,确认了桥型方案的可行性和结构的合理性.在该桥设计中,首次将波形钢腹板箱梁应用于无背索斜拉桥结构,为波形钢腹板箱梁组合结构在我国的推广应用奠定了基础.     

Intergranular oxidation of silicon in 20Cr-25Ni niobium-stabilized stainless steel at 1140–1230 K

The kinetics of intergranular oxidation of silicon in a 20Cr-25Ni Nb-stabilized stainless steel are reported, at temperatures in the range 1140–1230 K, in CO₂ at 40 bar pressure. The depth of attack increased parabolically with respect to time, with an activation energy of 335±30 kJ/mol. The mechanism of growth is discussed in terms of classical internal-oxidation theories, and an alternative explanation based on an available-space theory is developed. The internal oxidation rates in a number of different alloys are compared with diffusivities of metals in the base alloy. It is proposed that intergranular oxidation in the 20–25 Nb steel is controlled by the rate of outward diffusion of iron or chromium in the alloy.     

Effects of laser heat treatment on the fracture morphologies of X80 pipeline steel welded joints by stress corrosion

The surfaces of X80 pipeline steel welded joints were processed with a CO2 laser, and the effects of laser heat treatment （LHT） on H2S stress corrosion in the National Association of Corrosion Engineers （NACE） solution were analyzed by a slow strain rate test. The fracture morphologies and chemical components of corrosive products before and after LHT were analyzed by scanning electron microscopy and energy-dispersive spectroscopy, respectively, and the mechanism of LHT on stress corrosion cracking was discussed. Results showed that the fracture for welded joints was brittle in its original state, while it was transformed to a ductile fracture after LHT. The tendencies of hydrogen-induced corrosion were reduced, and the stress corrosion sensitivity index decreased from 35.2% to 25.3%, indicating that the stress corrosion resistance of X80 pipeline steel welded joints has been improved by LHT.     

顶管施工引起地表塌陷及关键技术分析

长距离大断面顶管施工不可避免的引起土体扰动和土层损失,导致土体塌陷和地表拉裂等现象.以某长距离超大断面顶管工程为工程研究背景,对顶管施工引起土体变形的机理展开了分析,对顶进施工过程中土体产生塌陷、地表出现张拉裂缝的原因进行了阐释,探讨了地表变位对周边建筑（构筑）物的影响,以及分析了该工程中运用的进出洞、中继器、触变泥浆减阻、加强现场监测、以及其他应急措施这5种关键控制技术,得到了一些保证工程施工安全的有益的经验.     

马钢2号高炉中修后开炉达产操作实践

对马钢2号高炉中修后开炉达产操作实践进行了总结。通过制定科学的开炉方案,快速提高煤比、降低焦比,实现了顺利开炉、快速达产达效的目标。     

Immobilizing chromium in stainless steel slags with MnO addition

This work investigates the stabilizing impact of MnO on the leaching behavior of hazardous Cr-containing CaO-SiO₂-Al₂O₃-Cr₂O₃-MnO stainless steel slags after equilibrating at various elevated temperatures and evaluates the potential immobilization of Cr into a MnCr₂O₄ spinel phase from the existing Cr₂O₃ phase. The MnCr₂O₄ spinel phase was found to be an excellent Cr-stabilizer in stainless steel slags, where the leaching tendency of potentially hazardous Cr-related ions decreased with higher MnO content and lower equilibration temperatures within the range of 0 to 15 mass pct. and 1500 to 1300°C, respectively. Thermodynamic calculations by conducting the phase stability diagram also showed that the MnCr₂O₄ spinel phase was relatively stable and the Ca₃Si₂O₇ (Ca_3-xMn_xSi₂O₇) phase was relatively unstable compared with other crystal phases in acid extractant with pH value of 3.2. Combined with the scanning electron microscopy and X-ray powder diffraction results along with the thermodynamic calculations, the leached Cr-related ions was predominantly originating from the unstable amorphous glass phase.     

Wear mechanisms of PcBN tools when machining AISI 316L

This paper investigates the machinability of AISI 316L stainless steel without and with NMI treatment, when machined with three different PcBN tool grades: low cBN content (50% vol.), medium (65% vol.) and high (90% vol.). The NMI treatment consisted of resulfurized and Ca-treated steels with two different Si/Al ratio. The tool materials were evaluated in terms of tool life, showing the best performance for the medium cBN content grade. Results showed that the crater wear has a more significant effect on the tool performance than the standard wear criteria of maximum flank wear. The worn tools were examined using scanning electron microscopy (SEM), focused ion beam (FIB) and transmission electron microscopy (TEM). In most cases, the crater exhibited three distinct regions from the edge to the end of the contact zone: the plateau, middle crater, and the upper region. Plateau and crater region displayed tool protective layer (TPL), consisting mostly of Al, Si, Mg and Ca-oxides; and some dimples in the tool from preferential wear of cBN grains. In the upper region of the best performing material, a ~1.5 μm thick TPL of mostly MnCr₂O₄ spinel was found, a result of the transfer of Mn- and Cr-rich oxide NMIs found in this material or oxidation of workpiece material, during the machining process.