钢铁企业全厂仪表维修设施设计初探

以我国某大型钢铁企业全厂仪表维修设施的设计方案为例,简要说明了仪修设施的设计原则、全厂仪表维修的一般解决方案,较详细地介绍了仪修设施专业划分、实验室及维修车间的设置和主要设备构成,为该类项目的设计和工程建设提供一定参考。     

基于投影匹配的钢坯端面字符快速识别方法

由于高温及复杂光照的干扰等成像环境的影响,钢坯端面字符自动识别存在很多困难,其实时自动识别难度大。现存的字符识别方法难以适应实际生产现场的需求。文章提出了一种基于投影匹配的快速识别方法,通过将图象二值化后进行垂直投影,直接将一维投影结果进行模板匹配,降低运算维数。大量的现场实验证明,该方法可有效的减少识别时间,提高生产效率,字符的拒识率和误识率较低,可满足生产线的实时要求。     

A low wall-loading DEMO reactor design with high priority for early and reliable realization of a tokamak fusion reactor over the cost performance

Based on scientific databases adopted for designing ITER plasmas and on the advancement of fusion nuclear technology from the recent R&D program, a low wall-loading DEMO fusion reactor has been designed, where high priority has been given to the early and reliable realization of a tokamak fusion plasma over the cost performance. Since the major radius of this DEMO reactor is chosen to be 10 m, plasma ignition is achievable with a low fusion power of 0.8 GW and an operation period of 4–5 hours is available only with inductive current drive. The low ignition power makes it possible to adopt a first wall with an austenitic stainless steel, for which significant databases and operating experience exists, due to its use in the presence of neutron irradiation in fission reactors. In step with development of advanced materials, a step-wise increase of the fusion power seems to be feasible and realistic, because this DEMO reactor has the potential to produce a fusion power of 5 GW.     

强磁场对硅锰铸钢于A_1点附近等温珠光体相变的影响

通过开展12 T强磁下硅锰铸钢(50Si_2Mn_3)于A_1点温度附近不同等温时间的热处理试验,并对比强磁场与无磁场条件下等温珠光体相变试验结果,研究了磁场对珠光体转变量及组织形貌的影响。研究表明,对于50Si_2Mn_3在A1点以下较高温度范围内,强磁场可缩短珠光体相变的孕育期,促进硅锰铸钢珠光体转变,使其转变量明显增加;强磁场能够提高珠光体转变临界点,使50Si_2Mn_3在A1点以上等温过程中能够发生珠光体相变。     

二溴对甲基偶氮甲磺光度法测定钢中微量锶

研究了二溴对甲基偶氮甲磺与锶生成2:1兰色络合物进行钢中微量锶的测定.该法λ_(max)=638nm,摩尔吸光系数E_(638)=5.01×10~4,锶量在0.02～0.34μg/L范围内服从比尔定律.方法已用于钢中微量锶的测定,结果满意.     

基于多目视觉的变形钢板三维测量方法

提出了一种使用4个相机测量变形钢板三维形状的方法;在没有纹理的钢板上画一些点,使用4个相机同时拍摄钢板;利用边缘检测算法找出钢板的边缘,利用特征点提取算法提取出4个图像中钢板上的特征点,并找到4个图像上精确的特征点匹配关系,然后测量出这些特征点的三维点;最后,以这些三维点为种子点向外区域增长,从而得到钢板的三维形状;实验对变形钢板进行三维测量,得到了钢板的精确的三维形状,结果验证了该方法的有效性和可行性。     

Developing a framework for analyzing IS sourcing

This paper develops a framework for the consideration of internal markets as an alternative to information systems (IS) outsourcing. It is based on an assessment of the pros and cons of both outsourcing and of insourcing based on the internal markets approach. It is formulated in terms of the operational, tactical, and strategic impacts of the choice among the alternatives. The framework, and the propositions that are developed from it, should be useful both for researchers, who can use it for developing testable research hypotheses, and for practitioners, who may use it as a basis for developing a comprehensive set of criteria for the evaluation of these sourcing options.     

不锈钢活性炭滤器的氯腐蚀与防腐

本文就活性炭在预处理中脱氯的不锈钢滤器的氯腐蚀机理进行了探讨，并提出了不锈钢活性炭脱氯滤器的防腐方法和措施。     

引大总干渠先明峡倒虹吸水平管段复位施工方法

引大入秦工程总干渠先明峡倒虹吸管水平段钢管因温度变化引起上下游伸缩节的预留伸缩量发生了较大的变化,造成支承环的底座与支墩上的四氟滑块产生了较大错位,支墩出现了偏心受压,大部分四氟滑块出现断裂、脱胶和翘曲等破坏。通过水平管段支承环底座的摩阻力、伸缩节橡胶棒摩阻力计算,水平管段采用箱型定向滑动导轨和滑动钢球的复位措施、施工方法、步骤。采用该施工方法复位后,工程运行情况良好。     

直埋玻璃钢聚氨酯保温管及其保温层厚度设计

介绍了直埋玻璃钢聚氨酯保温管的结构形式及优良性能．为了降低玻璃钢聚氨酯保温管的初期投资,探讨了直埋玻璃钢聚氨酯热力管保温层的2种设计方法,并采用工程实例进行计算．结果表明,按双层保温计算法设计保温层更为经济合理．以上结论为直埋玻璃铜聚氨酯保温管保温层设计提供了理论依据．