飞行时间二次离子质谱--强有力的表面、界面和薄膜分析手段

二次离子质谱（Secondary ion mass spectrometry，简称SIMS）是一种对表面灵敏的质谱技术，建立在表面各种类型带正、负电荷原子或分子发射的基础上。用飞行时间（Time of flight，简称TOF）仪器对这些二次离子进行质量分析，能确保并行质量登录、高质量范围、高流通率下的高分辨和精确质量测定这些优异性能。配合细聚焦扫描一次离子束，可在优于1nm的高深度分辨和优于50nm的横向分辨本领下，实现对表面优于单层ppm(百万分之一）量级的极高检测灵敏度。当今TOF－SIMS已发展为一种成熟且完善的表面分析技术。极高的灵敏度，再加上即使对大分子及不易挥发性分子都独具的敏感性，使它成为很多高技术领域不可缺少的分析手段，这些领域包括微电子学、化学和材料科学以至纳米技术和生命科学等。本文简述了TOF－SIMS的原理、仪器及其多方面的应用和展望。     

中频反应溅射SiO2膜与直流溅射ITO膜的在线联镀

多数ITO透明导电玻璃生产线在实现SiO2膜与ITO膜在线联镀时，应用SiO2靶射频溅射沉积SiO2膜工艺和ITO靶直流溅射沉积ITO膜工艺，如果SiO2膜应用硅靶反应磁控溅射工艺，存在这种工艺是否可以与ITO靶直流溅射沉积ITO膜工艺在线联用以及如何实现联用的问题。作者对现有的生产线进行了改造设计、加工，做了大量实验、质谱分析和多项测试研究，成功地实现反应溅射SiO2膜与ITO膜在线联镀，做到SiO2镀膜室的工作状态的变化基本上不影响ITO镀膜室的工艺条件。     

虚拟专用网的体系结构及实现

提出VPN接入设备的体系结构 ,包括系统的应用模型、层次划分和内部详细结构 ,阐述实现VPN的关键技术。     

Mechanical and microstructure studies on the modification of CA film by blending with PS

DriedMusa paradiciaca (banana) stem and veins of the leaves, which were hitherto discarded as a waste, were collected and used as starting material for the preparation of cellulose and cellulose acetate. This cellulose acetate was mixed with polystyrene to form blend of cellulose acetate-polystyrene in order to provide enhanced stability and extended utility to the end products. The films of these composites or their individual partners were made separately and studied for their mechanical properties, chemical modification and morphological changes. We report here that banana stem is good source of cellulose and that cellulose completely undergoes modification upon esterification.     

贯彻《水文条例》加强水文科研工作

水文是水利工作乃至国民经济社会发展的基础性和公益性工作。环境的变化、社会的发展、新时期水利工作治水思路转变等均向水文工作提出了新的要求，也提出了许多新的水文科学技术问题。我们应该认真学习贯彻《中华人民共和国水文条例》，加强水文监测工作，加强水文资料的汇交、管理和共享．进一步推进水文现代化建设，推进水文事业的健康发展。     

Photocatalytic degradation of methyl orange using heteropolytungstic acid-encapsulated TiSBA-15

Heteropolyphosphotungstic acid (H₃PW₁₂O₄₀) (HPA)-encapsulated titanium-supported SBA15 nanoporous materials (HPA-TiSBA-15) were synthesized as a new photocatalyst, and they were characterized by FT-IR and ³¹P NMR MAS spectroscopic methods. Their photocatalytic effects on degradation of methyl orange in water were investigated under natural conditions, and it was found that a 4-fold increase in the photodegradation rate is observed in the presence of HPA-TiSBA-15 as compared to the rate observed in the presence of titanium-supported SBA15 nanoporous materials (TiSBA-15) without HPA.     

铝电解槽磁流体稳定性有限元分析

本文采用有限元法求解分层磁流体小扰动方程系统特征值，研究铝电解槽稳定性。研究结果表明，在没有电磁力时，铝液表面波动（内波）是稳定的。存在电磁力时，它会激发铝液表面波动的某些低频长波分量不稳定性，高频短波不受影响。被激发的不稳定波动频率和扰动增长率与电流密度，磁感应强度垂直分量，铝电解槽长宽比，电解质和铝液的密度差，厚度等因素密切相关。减少电流密度，磁感应强度，增加电极距离和铝液厚度可以提高铝电解槽的稳定性。这对铝电解槽优化设计和在线控制有重要意义。     

电源对介质阻挡放电(DBD)激发准分子(XeCl*)辐射的影响

本文对电源参数如电压幅值、频率及正负电压对介质阻挡放电激发准分子XeCl 紫外 (30 8nm)辐射的影响进行了实验研究。结果表明 ,UV辐射随电压幅度的增加而增强 ,但效率下降 ;提高频率 ,增加了放电次数 ,导致UV辐射的增强 ;此外 ,在较高的频率下 ,电压上升沿变陡 ,使得电子获得的能量主要用于原子的激发和电离。正、负电压放电的不对称源于电极结构的不对称而引起的放电过程的差异 ,负电压内电极可向放电管中馈入更多的能量 ;比较发光光谱可判断生成准分子的等离子体化学过程没有明显的差别     

Hybrid gas-to-particle conversion and chemical vapor deposition for the production of porous alumina films

Porous alumina films can be found in a wide variety of materials, including filters, thermal insulation components, dielectrics, biomedical and catalyst supports, coatings and adsorbents. Production methods for these films are as equally diverse as their applications. In this work, a hybrid process based upon chemical vapor deposition and gas-to-particle conversion is presented as an alternative technique for producing porous alumina films, with the main advantages of solvent-free, low substrate-temperature operation. In this process, nanoparticles were produced in the vapor phase by reaction of aluminum acetylacetonate in the presence of oxygen. Downstream of this reaction zone, these nanoparticles were collected via thermophoresis onto a cooled substrate, forming a porous film. Some deposited films were subjected to post-processing in the form of annealing in air. Fourier-transform infrared spectra and X-ray energy-dispersive spectroscopy analysis confirmed the production of alumina at processing temperatures above 973 K. X-Ray diffraction revealed that the films were amorphous. Film thickness, ranging from 30 to 250 μm, and the average deposition rate were determined from scanning electron microscopy results. From transmission electron microscopy, the average primary particle size was determined to be approximately 18 nm and the formation of nanoparticle aggregates was evident. Annealing of the films at temperatures ranging from 523 to 1173 K in the presence of air did not have an effect on particle size. The specific surface area of the powder composing the films ranged from 10 to 185 m² g⁻¹, as determined from nitrogen gas adsorption by the Brunauer–Emmett–Teller method.     

Posttraumatic stress in children and adolescents exposed to family violence: I. Overview and issues.

Exposure to child physical abuse and parents' domestic violence can subject youth to pervasive traumatic stress and can lead to posttraumatic stress disorder (PTSD). This article presents evolving conceptualizations in the burgeoning field of trauma related to family violence exposure and describes how the often repeating and ongoing nature of family violence exposure can complicate a PTSD diagnosis. In addition, recent literature indicates that children exposed to family violence may experience problems in multiple domains of functioning and may meet criteria for multiple disorders in addition to PTSD. Considerations salient to the recognition of traumatic stress in this population and that inform assessment and treatment planning are presented. (PsycINFO Database Record (c) 2010 APA, all rights reserved)