基于无传感器的PMSM电流控制策略的研究

提出一种新型的滑模观测器,并分别研究在4种不同的电流控制策略下,基于该新型滑模观测器的PMSM伺服系统的控制问题。该新型滑模观测器引进了Sigmoid函数作为控制函数用来抑制抖振,并根据PMSM的反电动势模型构建了反电势观测器来提取所需的连续信号,因此取消了传统的一阶低通滤波器和相角补偿环节。为了对电机的转子位置和转速进行更加精确的估算,引入了转子位置锁相环结构。在Matlab/Simulink平台基础上建立了4种不同的电流控制策略,基于新型滑模观测器PMSM无位置传感器三闭环控制系统仿真模型,分别对反电动势估算、速度估算、位置估算和突加负载扰动进行了仿真分析。仿真结果表明,该新型滑模观测器在4种不同的电流控制策略下,对电机转子位置和转速的估算、电磁转矩以及定子三相电流有着不同的影响,验证了该新型滑模观测器算法的可行性。     

基于硬件滤波电路的无刷直流电机转子位置辨识

反电动势过零检测是无刷直流电机无位置传感器控制中转子位置检测的主要方法之一,为消除PWM因素的影响,需要对转子位置检测电路进行滤波处理。本文采用硬件滤波器对反电动势过零检测电路进行滤波,既要考虑深度滤波带来的相移问题又要兼顾消除噪声的影响,分析滤波器的幅频特性和相频特性,根据反电动势过零检测指标要求设计滤波器参数,并用于无刷直流电机转子位置辨识和无位置传感器控制中。仿真结果和实验结果表明,所采用的滤波器及其参数能较好地检测出转子位置,可以明显提高无位置传感器无刷直流电机驱动系统的控制性能。     

对策论在雷达阵地综合防护效能分析中的应用

针对雷达阵地的防护特点,运用对策论的基本原理探索雷达阵地综合防护效能分析问题.构建了雷达阵地综合防护效能分析指标体系,结合对策论建立了评估模型,并用实例检验该方法具有较好的应用价值.     

TH-PPM UWB通信系统多址性能研究

介绍了TH-PPM UWB信号,在AWGN信道和多用户干扰条件下对系统的性能进行了分析,包括误码率分析和系统所能接入的最大用户数,对其误码率进行了仿真.结果表明,随着接入用户数目的增加,系统误码率也增加,而增大重复码长度和脉冲重复时间则可降低系统误码率,但增加脉冲重复时间会降低信息传输速率.     

微小型工业汽轮机智能交流伺服调节系统研究

为了解决微小型工业汽轮机组调节控制系统设备简陋,动态响应和稳态精确度差的问题,提出了一种采用交流伺服电机和模糊PID控制的自动调节系统．在对调节系统部件特性数据进行分析的基础上,应用机理分析法建立了工业汽轮机交流伺服调节系统的数学模型,建立了以模糊PID控制和常规PID为主的控制器仿真模型,并利用MATLAB（SIMULINK）进行了动态仿真．结果表明,采用交流伺服电机作为执行器比传统的机械式调节系统具有更优良的动态和稳态性;采用模糊PID控制策略的调节系统在减少调节时间、改善动态品质方面均好于常规PID调节器．为工业汽轮机交流伺服调节系统的进一步研究提供了理论基础．     

What localizes beneath: A metric multisensor localization and mapping system for autonomous underground mining vehicles

Robustly and accurately localizing vehicles in underground mines is particularly challenging due to the unavailability of GPS, variable and often poor lighting conditions, visual aliasing in long tunnels, and airborne dust and water. In this paper, we present a novel, infrastructure‐less, multisensor localization method for robust autonomous operation within underground mines. The proposed method integrates with existing mine site commissioning and operation procedures and includes both an offline map‐building process and an online localization algorithm. The approach combines the strengths of visual‐based place recognition, LIDAR‐based localization, and odometry in a particle filter fusion process. We provide an extensive experimental validation using new large data sets acquired in two operational Australian underground hard‐rock mines (including a 600m‐deep multilevel mine with approximately 33 km of mapping data and 7 km of vehicle localization) by actual mining vehicles during production operations. We demonstrate a significant increase in localization accuracy over prior state‐of‐the‐art SLAM research systems and real‐time operation, with processing times in the order of 10 Hz. We present results showing a mean error of 0.68 m from the Queensland Mine data set and 1.32 m from the New South Wales Mine data set and at least 86% reduction in error compared with prior state of the art. We also analyze the impact of the particle filter parameters with respect to localization accuracy. Together this study represents a new approach to positioning systems for currently deployed autonomous vehicles within underground mine environments.     

Observer‐based compensation control of servo systems with backlash

For compensating backlash phenomenon in servo systems, the authors propose an observer method in this paper to estimate both system states and vibration torque before controller design. First, a systematic scheme is given to obtain plant parameters, which is very important in observing system states. This is a parameter estimation principle that gives a crude estimation and computes the differences between the crude and true values. As a result, the precise value of the parameters is obtained by adding together the crude value and the difference. Then, based on the precise estimated parameters, an extended state observer (ESO) is designed to obtain feedback and feedforward signals. Consequently, robust compensation control is achieved by designing an output feedback controller, consisting of a feedback term and a feedforward term. Finally, in order to validate the proposed approach, extensive experiments are performed on a practical servo system with backlash nonlinearity.     

一种基于并联机构的航天器姿态模拟装置的设计开发

航天器发射升空前进行地面测试和试验是航天器研制过程中的重要环节。文中针对一种基于并联机构的姿态模拟装置的设计开发,从位置分析、速度分析和虚拟样机的建造和仿真分析等方面对3UPS-PU并联机构进行研究,完成姿态模拟装置的设计,为航天器装配、试验和测试设备的设计提供一种新的思路。     

依据角度位置变速的铺匀器控制系统

用角度测量传感器，检测铺匀器的角度变化，并用新型的电、液控制技术，实施了对铺匀器的变速控制。此设计经实际使用，效果良好。     

A global cutter positioning method for multi-axis machining of sculptured surfaces

Traditional cutter positioning methods have defects of global errors and incomplete optimization. Because of using local differential geometry and focusing on the cutting contact point, these defects cannot be avoided and will deteriorate accuracy in precision machining. The authors presented the conception of actual cutting edge of a toroidal mill which was extended from cutting contact point, and pointed out its importance in programming. Instantaneous cutter position error (ICPE) was also investigated. A new global method based on the ICPE curve was presented. Taking the relationship between surface and cutter into consideration thoroughly, this global method shows many advantages which have been verified by simulation and cutting tests.