Binder effect on cycling performance of silicon/carbon composite anodes for lithium ion batteries

The cycling performance of a silicon/carbon composite anode has been significantly enhanced by using acrylic adhesive and modified acrylic adhesive as binder to fabricate the electrodes for lithium ion batteries. The capacity retentions of Si/C composite electrodes bound by acrylic adhesive and modified acrylic adhesive are 79% and 90% after 50 cycles, respectively. These two binders are electrochemically stable in the organic electrolyte in the working window. They also show larger adhesion strength between the coating and the Cu current collector as well as smaller solvent absorption in the electrolyte solvent than polyvinylidene fluoride (PVDF). Furthermore, sodium carboxyl methyl cellulose (CMC) plays an important role on improving the properties of acrylic adhesive, which increases the adhesive strength of acrylic adhesive and improves the activation of the electrodes.     

废旧锂电池中有价金属回收及三元正极材料的再制备

探讨了磷酸体系下不同因素对废旧锂电池正极材料中有价金属浸出效率的影响，结果表明：在浸出时间60min，反应温度60℃，磷酸浓度2mol/L，液固比20mL/g，还原剂(H₂O₂)体积分数为4%时，可得最佳浸出效果，Co、Li、Mn、Ni浸出效率分别可达96.3%、100%、98.8%和99.5%；浸出液添加相应比例金属离子，采用草酸共沉淀法制备前体材料(Ni_1/3Co_1/3Mn_1/3)C₂O₄，并得到相应再生磷酸溶液。再生磷酸进行循环浸出实验，实验研究结果表明：循环浸出5次之后Li的浸出率仍可保持在90.1%，而Co、Mn和Ni的浸出率在75.0%以上。前体添加锂源Li₂CO₃煅烧合成Li(Ni_1/3Co_1/3Mn_1/3)O₂材料，考察了不同温度对Li(Ni_1/3Co_1/3Mn_1/3)O₂材料合成的影响，结果显示，当合成温度为800℃时，得到的材料性能最优良，初次放电容量可达136.4mA·h/g。在0.2C下经过50圈循环后容量保持率为97.2%。     

Possible use of methylbenzenes as electrolyte additives for improving the overcharge tolerances of Li-ion batteries

Based on the voltammetric behaviour of a series of methyl-substituted benzenes in 1M LiPF₆/EC-DMC electrolyte, xylene was selected and tested as an electrolyte additive for overcharge protection of Li-ion batteries. From the overcharge curves, CV behaviour and SEM observations of the cells in the presence of xylene, it was found that the additive can polymerize at the overcharged voltage to form a dense layer of isolating polymer film at the cathode surface, which blocks off further oxidation of the electroactive material and electrolyte and, therefore, improves the overcharge tolerance of the Li-ion battery. In addition, the xylene additive has shown only a slight influence on the cycling behaviour.     

Synthesis and electrochemical performance of LiNi0.5Mn1.5O4 spinel compound

Spinel compound LiNi_0.5Mn_1.5O₄ was synthesized by a chemical wet method. Mn(NO₃)₂, Ni(NO₃)₂·6H₂O, NH₄HCO₃ and LiOH·H₂O were used as the starting materials. At first, Mn(NO₃)₂ and Ni(NO₃)₂·6H₂O reacted with NH₄HCO₃ to produce a precursor, then the precursor reacted with LiOH·H₂O to synthesize product LiNi_0.5Mn_1.5O₄. The product showed a single spinel phase under appropriate calcination conditions, and exhibited a high voltage plateau at about 4.6-4.8 V in the charge/discharge process. The LiNi_0.5Mn_1.5O₄ had a discharge specific capacity of 118 mAh/g at about 4.6 V and 126 mAh/g in total in the first cycle at a discharge current density of 2 mA/cm². After 50 cycles, the total discharge capacity was above 118 mAh/g.     

磷酸铁锂锂离子电池正极材料的研究

锂离子电池是绿色高能可充电池，具有工作电压高、比能量大、自放电小、循环寿命长、无记忆效应、无环境污染等突出优点。本文从磷酸铁锂的结构与性能、材料的制备方法、改性、粒径控制等几方面综述了近年来对橄榄石型磷酸铁锂（LiFePO4）锂离子电池正极材料的研究进展。材料的粒度大小及其分布、离子和电子的传导能力对产品的电化学性能影响很大。在制备时，采用惰性气氛、掺杂导电材料和控制晶粒生长制备粉体是获得性能优良的LiFePO4的有效方法。     

Electrochemical performance of nanocrystalline Li3V2(PO4)3/carbon composite material synthesized by a novel sol–gel method

A novel sol–gel method based on V₂O₅·nH₂O hydro-gel was developed to synthesize nanocrystalline Li₃V₂(PO₄)₃/carbon composite material. In this route, V₂O₅·nH₂O hydro-gel, NH₄H₂PO₄, Li₂CO₃ and high-surface-area carbon were used as starting materials to prepare precursor, and the Li₃V₂(PO₄)₃/carbon was obtained by sintering precursor at 750 °C for 4 h in flowing argon. The sol–gel synthesis ensures homogeneity of the precursors and improved reactivity. The sample was characterized by XRD, SEM and TEM. X-ray diffraction results show Li₃V₂(PO₄)₃ sample is monoclinic structure with the space group of P2₁/n. The TEM image indicates that the Li₃V₂(PO₄)₃ particles modified by conductive carbon are about 70 nm in diameter. The Li₃V₂(PO₄)₃/carbon system showed that the discharge capacities in the first and 50th cycle are about 155.3 and 143.6 mAh/g, respectively, in the range of 3.0–4.8 V. The sol–gel method is fit for the preparation of Li₃V₂(PO₄)₃/carbon composite material which may offer some favorable properties for commercial application.     

锂离子电池正极材料LixMn2O4研究进展

总结了锂离子电池正极材料LixMn2O4的合成方法，归纳了造成容量衰减问题的原因和目前为解决该问题所采用的各种方法，并且对下一步的研究工作进行了展望。     

Implementation of a real option in a sustainable supply chain: an empirical study of alkaline battery recycling

Green supply chain management (GSCM) has emerged as a key approach for enterprises seeking to become environmentally sustainable. This paper aims to evaluate and describe the advantages of a GSCM approach by analysing practices and performance consequences in the battery recycling sector. It seeks to integrate works in supply chain management (SCM), environmental management, performance management and real option (RO) theory into one framework. In particular, life cycle assessment (LCA) is applied to evaluate the environmental impact of a battery recycling plant project, and life cycle costing (LCC) is applied to evaluate its economic impact. Firms, also understanding the relevance of GSCM, have often avoided applying the green principles because of the elevated costs that such management involved. Such costs could also seem superior to the potential advantages since standard performance measurement systems are internally and business focused; for these reasons, we consider all the possible value deriving also by uncertainty associated to a green project using the RO theory. This work is one of the few and pioneering efforts to investigate GSCM practices in the battery recycling sector.     

Structural, electrochemical and thermal properties of LiNi0.8−yTiyCo0.2O2 as cathode materials for lithium ion battery

Multiple substitution compounds with the formula LiNi_0.8−yTi_yCo_0.2O₂ (0≤y≤0.1) were synthesized by sol-gel method using citric acid as a chelating agent. The effects of titanium substitution on the structural, electrochemical and thermal properties of the cathode materials are investigated. A solid solution phase (R-3m) is observed in the range of 0≤y≤0.1 for the titanium-doped materials. X-ray photoelectron spectroscopy (XPS) shows that there are Ni³⁺, Ni²⁺, Co³⁺, Co²⁺ and Ti⁴⁺ five transition metal ions in titanium-doped materials. Rietveld refinement of X-ray diffraction (XRD) patterns indicates that titanium substitution changes the materials’ structure with different cationic distribution. An increase of the Ni/Co amount in the 3a Li site is found with the addition of titanium amount. An improved cycling performance is observed for titanium-doped cathode materials, which is interpreted to a significant suppression of phase transitions and lattice changes during cycling. The thermal stability of titanium-doped materials is also improved, which can be attributed to its lower oxidation ability and enhanced structural stability at delithiated state.     

基于充电方式的锂电池SOC 校准和估计方法

荷电状态(SOC)是动力锂电池的重要参数.针对安时法估计锂电池SOC存在累积误差,其他估计算法复杂度较高的问题,提出一种工程实用的SOC估计方法.该方法通过分析电池特性并结合安时法,建立了SOC初始值、总容量和累积误差的校准方法.通过建立终端电压与SOC之间的映射关系,利用恒流、恒压不同充电阶段的电池特性,实现了电池系统在一个放电周期内的SOC高精度估计.实验表明,该方法能够使得SOC的估计误差在5%以内.