快速星图匹配算法的研究

将态敏感和姿态稳定是卫星的重要技术之一。星体敏感器是目前最高精度的姿态测量技术。对于这种技术，很多文献都进行了讨论，并涌现了许多关于星图匹配行之有效的算法。     

语音识别算法的确定与实现

在语音识别的实验中，对几种算法方案进行了比较、分析和择优淘劣，标准是在一定词汇量的条件下，权衡占用机器的内存空间、（正确）识别率和响应速度。力争使与话者有关的单词语音识别系统的设计达到优化，取得满意的结果。本文即是此项实验的总结。     

角调谐飞秒同步泵浦KTP红外光参量振荡器

用平均输出功率为１．１Ｗ，脉宽为９０ｆｓ的商用再生锁模Ｔｉ：Ｓａｐｐｈｉｒｅ激光器作为泵浦源，用ＫＴＰ作为非线性光学介质，制成一台同步泵浦飞秒光学参量振荡器。其输出调谐范围为１．０４μｍ至１．２６μｍ，平均输出功率在１００ｍｗ左右，脉宽仅约１００ｆｓ。     

基于Apriori算法改进的关联规则提取算法

通过对Apriori算法的基本思想和性能的研究分析，认为Apriori算法存在一些不足。并且根据这些不足提出了相应的改进算法对Apriori算法进行优化，从而得到一种改进的Apriori算法，与原算法相比运算效率大大提高。     

In the theory of blast waves

The behavior of the blast wave from an exploding spherical volume is investigated mathematically over the entire range of blast-wave propagation. The computational method uses analytical results for a similar problem for a point explosion with counter pressure and the theory of an asymptotically equivalent point explosion. The asymptotic solution of the gas-dynamic equations away from the explosion site is matched to the initial conditions of blast-wave formation due to the disintegration of the detonation shock upon its arrival at the boundary of the exploding volume. The spatial distribution of the blast-front pressure is found for combustible gaseous systems and solid explosives. The theoretical results obtained agree quantitatively with available experimental measurements. __________ Translated from Fizika Goreniya i Vzryva, Vol. 42, No. 4, pp. 93–99, July–August, 2006.     

Sensitivity analysis of the scattering parameters of microwave filters using the adjoint network method

A novel approach is presented to calculate the sensitivities of the scattering parameters of microwave filters obtained with the full‐wave mode‐matching (MM) technique. Using only the MM simulation of the original network, the sensitivities of the scattering parameters with respect to all designable parameters are obtained. The adjoint network method (ANM) is applied to the generalized scattering matrices of the different filter components. This guarantees good accuracy of the calculated sensitivities. The implementation details are discussed for N‐resonator ridge waveguide filters. Excellent agreement is obtained between the sensitivities calculated using ANM and those obtained using the expensive central differences. © 2006 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2006.     

基于自然地理形态的道路测设及其曲线方程的拟合

在山区村镇及风景旅游名胜区的建设中，其道路的曲线测设，往往要基于自然地理形态进行，也就是路径的选择，有时具有不可选择性，且要求与实地具有最大的符合性。因此，其测设的作业方法不同于一般意义的道路测设；其曲线方程的建立，也是极其困难的。本就基于自然地理形态的道路测设工作的曲线类型的选择、曲线的拟合方法、曲线方程的建立及其数据的计算，提出了利用CAD技术进行曲线拟合、曲线方程的建立、曲线计算的实用技术方法。     

一种全局优化的多面体凸分解匹配方法

提出了一种全局优化的多面体匹配方法，该方法对物体的拓扑关系和结构关系进行多级匹配,利用全局优化的松驰迭代方法减少匹配误差，并由匹配的一致性准则进行匹配结果的检测，根据物体的内在特征来进行匹配，从而解决非同构物体的匹配.可广泛应用于物体识别、三维物体重建、医学图象处理等领域，实验证明此方法质量好、自动化程度高，是一种有效的全局优化结构匹配方法．     

Orthotropic Plate Model for Estimating Deflections in Filled Grid Decks

Concrete filled grid bridge decks exhibit orthogonal elastic properties and significant two-way bending action enabling orthotropic plate theory to determine structural response for these elements. Current American Association of State Highway and Transportation Officials load and resistance factor design (LRFD) specifications employ an orthotropic plate model to predict live load moment in concrete filled grid bridge decks but provide no guidance for computing displacement, a potentially important serviceability consideration. This paper presents equations to approximate the maximum deflection in concrete filled grid bridge decks based on orthotropic plate theory, multiple patch loads, LRFD design truck and tandem load cases, the influence of multiple spans, and the two most common deck orientations.