基于视差重映射的立体图像视觉舒适度提升

目的 针对人眼观看立体图像内容可能存在的视觉不舒适性,基于视差对立体图像视觉舒适度的影响,提出了一种结合全局线性和局部非线性视差重映射的立体图像视觉舒适度提升方法。方法 首先,考虑双目融合限制和视觉注意机制,分别结合空间频率和立体显著性因素提取立体图像的全局和局部视差统计特征,并利用支持向量回归构建客观的视觉舒适度预测模型作为控制视差重映射程度的约束;然后,通过构建的预测模型对输入的立体图像的视觉舒适性进行分析,就欠舒适的立体图像设计了一个两阶段的视差重映射策略,分别是视差范围的全局线性重映射和针对提取的潜在欠舒适区域内视差的局部非线性重映射;最后,根据重映射后的视差图绘制得到舒适度提升后的立体图像。结果 在IVY Lab立体图像舒适度测试库上的实验结果表明,相较于相关有代表性的视觉舒适度提升方法对于欠舒适立体图像的处理结果,所提出方法在保持整体场景立体感的同时,能更有效地提升立体图像的视觉舒适度。结论 所提出方法能够根据由不同的立体图像特征构建的视觉舒适度预测模型来自动实施全局线性和局部非线性视差重映射过程,达到既改善立体图像视觉舒适度、又尽量减少视差改变所导致的立体感削弱的目的,从而提升立体图像的整体3维体验。     

Bending of Delaminated Composite Conoidal Shells under Uniformly Distributed Load

Conoidal shells are very popular roofing units owing to their aesthetic elegance and stiffness. Many parts of the globe, which were earlier assumed to be seismologically stable, are now being considered as earthquake prone. Hence the necessity to build light structures using composites has become very important. In this paper an eight-noded isoparametric shell element is applied for analyzing the bending behavior of delaminated composite conoidal shells under a uniformly distributed load with different practical boundary conditions. To ensure compatibility of deformation and equilibrium of forces and moments at the delamination crack front, a multipoint constraint algorithm is incorporated, which leads to an unsymmetrical stiffness matrix. This formulation is validated through the solution of benchmark problems. Lamination, curvature, and extent of delamination area are varied to compare the performances of delaminated conoidal shells against those with no damage. The results are carefully observed, and a set of conclusions is presented at the end of the paper.     

Can people really “laugh at themselves?”—Experimental and correlational evidence.

Laughing at oneself is considered a core component of the sense of humor in the theories of several authors. In McGhee's (1996) eight-step-training program of the sense of humor, laughing at oneself constitutes one of the most difficult levels. However, until now, only little empirical evidence on laughing at oneself exists. Using a multimethod approach, in the current study, 70 psychology students and a total of 126 peers filled in the Sense of Humor Scale (SHS, McGhee, 1996), containing as a subscale “Laughing at oneself”. In addition, the participants answered the Trait and State forms of the State-Trait-Cheerfulness-Inventory (STCI, Ruch, K?hler, & van Thriel, 1996; Ruch, K?hler, & van Thriel, 1997). They then were confronted with six distorted images of themselves. Facial responses of the participants were videotaped and analyzed using the Facial Action Coding System (FACS, Ekman, Friesen, & Hager, 2002). Four indicators of exhilaration were examined: (a) experienced funniness, (b) AU12 smiles, (c) Duchenne displays, and (d) laughter. Furthermore, fake and masking smiles were studied. Results demonstrated that self- and peer reports of “laughing at oneself” converged moderately. All four indicators of exhilaration were shown, but funniness and laughter seemed to be the most strongly related indicators. Trait cheerfulness and (low) seriousness, and a cheerful mood state formed further characteristics of persons who laugh at themselves. (PsycINFO Database Record (c) 2011 APA, all rights reserved)     

Formalising the Fisherman's Folly puzzle

This paper investigates the challenging problem of encoding the common sense knowledge involved in the manipulation of spatial objects from a reasoning about actions and change perspective. In particular, we propose a formal solution to a puzzle composed of non-trivial objects (such as holes and strings) assuming a version of the Situation Calculus written over first-order Equilibrium Logic, whose models generalise the stable model semantics.     

Assessment of duration and frequency of work tasks by telephone interview: reproducibility and validity

Quantitative estimation of physical work load requires breakdown of jobs into smaller entities. The objective was to study the inter-rater reproducibility of the contents, frequency and duration of work tasks assessed by telephone interview. Two researchers interviewed 18 industrial workers with an interval of from 2 to 3 weeks in a balanced and blinded design. Altogether 114 tasks were identified, 68 of which were recorded by both interviewers. The tasks were classified into regularly occurring (n=34) and occasional (n= 80). The outcome was the total duration of the tasks per day computed from the data on frequency and duration. Validity of the interview was studied against prestructured diaries filled in by nine workers. The interviewers' assessments of the overall contents of the tasks were rated as ‘similar’ or ‘very similar’ for 17 of the 18 workers. Both interviewers detected all 34 regularly occurring tasks. The intraclass correlation coefficient (ICC) of the total duration between the interviewers was 0.81 for regularly occurring tasks. ICCs of the total duration between the diary and the two interviewers were 0.90 and 0.91. However, in many cases the workers could not give a numerical value for duration or frequency. A telephone interview can be used as a first step in exposure assessment in epidemiological studies on risk factors of musculoskeletal disorders. These results show that a single telephone interview can give reproducible and valid information of the frequency and duration of tasks occurring daily. For occasional tasks interview methods should be developed further.     

Trunk muscle activation and low back loading in lifting in the absence of load knowledge

People who know the actual mass of an object to be lifted normally prepare themselves before attempting a lift to control the movement and to minimize low back loading. In this study, the trunk muscular reactions and low back torque were investigated in the situation in which the individual did not know the actual mass but only had some idea of the range within which the mass lay. Nine males lifted boxes weighing 6.5 or 16.5 kg under the condition in which they knew the actual mass before attempting a lift (the ‘known’ condition) and the condition in which they only had the information that the mass would be within the range of 6.5–16.5 kg (the ‘unknown’ condition). The ground reaction forces and body movements were measured in the trials and, from these, the L5/S1 torques were calculated. The activation of back and abdominal muscles was also measured. For the 6.5 kg weight, a higher (16%) back muscle activation in grasping the box and a higher (10%) peak L5/S1 torque in actual lifting were observed in the ‘unknown’ compared with the ‘known’ weight condition. For the 16.5 kg weight, the back muscle activation was lower (10%) during grasping, and higher (10%) during lifting in the ‘unknown’ compared with the ‘known’ weight condition. Knowledge of the load had no effect on the activation of the abdominal muscles. It was concluded that in the so-called ‘unknown’ conditions, the risks of low back injury were increased in comparison with the conditions where the actual weight was known in advance.     

Force direction and physical load in dynamic pushing and pulling

In pushing and pulling wheeled carts, the direction of force exertion may, beside the force magnitude, considerably affect musculoskeletal loading. This paper describes how force direction changes as handle height and force level change, and the effects this has on the loads on the shoulder and low back. Eight subjects pushed against or pulled on a stationary bar or movable cart at various handle heights and horizontal force levels while walking on a treadmill. The forces at the hands in the vertical and horizontal direction were measured by a forcetransducer. The forces, body movements and anthropometric data were used to calculate the net joint torques in the sagittal plane in the shoulder and the lumbosacral joint. The magnitudes and directions of forces did not differ between the cart and the bar pushing and pulling. Force direction was affected by the horizontal force level and handle height. As handle height and horizontal force level increased, the pushing force direction changed from 45° (SD 3.3°) downward to near horizontal, while the pulling force direction changed from pulling upward by 14° (SD 15.3°) to near horizontal. As a result, it was found that across conditions the changes in force exertion were frequently reflected in changes in shoulder torque and low back torque although of a much smaller magnitude. Therefore, an accurate evaluation of musculoskeletal loads in pushing and pulling requires, besides a knowledge of the force magnitude, knowledge of the direction of force exertion with respect to the body.     

Effect of load position on physiological and perceptual responses during load carriage with an internal frame backpack

The purpose of this study was to determine the effect of load position in an internal frame backpack on physiological and perceptual variables. Ten female participants walked on a level treadmill for 10?min carrying 25% of their body weight in a high, central, or low position. The variables measured included oxygen consumption (VO₂), heart rate (HR), respiratory exchange ratio (R), respiratory rate (RR), minute ventilation (VE), and rating of perceived exertion (RPE). VO₂, VE, and RPE were significantly lower in the high position (18.6?±?2.3?ml/kg/min, 31.7?±?5.0?l/min, 2.8?±?0.8, respectively) compared to the low position (22.2?±?3.0?ml/kg/min, 38.6?±?7.5?l/min, 3.7?±?1.0, respectively). HR, R, and RR did not change significantly as the load was moved from the high (129.8?±?16.8, 0.89?±?0.06, 30.3?±?4.2, respectively) to the low position (136.0?±?25.3, 0.92?±?0.04, 33.8?±?5.2, respectively). The results of this study suggest that load placement is an important factor in the physiological and perceptual responses to load carriage, and that packing heavy items high in the backpack may be the most energy efficient method of carrying a load on the back.