Bruchanalyse an Hohlgläsern

Failure analysis of hollow glasses The failure analysis is very important to clarify damages of hollow glasses. Damages of glass bottle through over pressure are very often linked with damages to persons. This is the reason why the causal research is from particular importance. Different surface characteristics of glass fragments as well as the fracture pattern give hints to the direction of the crack, the stress just before breakage and the reason of stress. A reconstruction of the bottle is a further helpful instrument for cause studies. The difference of the various characteristics of the surface will be explained. Further on there will be discussed different reasons and mechanism of fracture.     

Magnetic properties of high-temperature superconductors: Analysis within the framework of the impurity mechanism

The impurity mechanism proposed earlier is used to interpret the magnetic properties of hightemperature superconductors. The appearance of superconductive granules and the existence of weak bonds in grains of ceramics and in single crystals is explained. The irreversibility line is obtained and its new interpretation as the line of thresholds of appearance of infinite nonsuperconductive cluster is given. The relaxation time of the magnetic susceptibility in alternating magnetic fields is calculated. The decrease of the Meissner fraction with increase in magnetic field and decrease in doping, and other magnetic properties are explained.     

DFMC在水利机械产品开发中的应用研究

分析了DFMC(大规模定制设计)关键技术及相关技术,提出了运用该项技术开发产品企业应作好的前期准备,研究了水利机械产品"大型移动启闭机"的定制开发。     

杀虫植物的研究新进展及应用发展前景

介绍了近几年杀虫植物研究的新进展，主要包括楝科、卫矛科、豆科、菊科、胡椒科、百部科、瑞香科等科杀虫植物的作用方式和部分植物的有效成分与作用机制及杀虫植物的应用概况，并分析了其应用发展前景。     

Configurational statistics of copolymers prepared by complex-radical polymerization

Radical copolymerization is considered theoretically taking into account the effect of complexing on the configurational statistics of macromolecules formed. Akinetic model has been developed that considers, apart from the ordinary addition of single monomer units to a propagating chain, the possible addition of monomer unit pairs along with a complexing agent in the form of a ternary complex. Within the framework of this model, the problem of calculating the probabilities of formation of any sequences of monomer units (taking into account their microtacticity) in a macromolecule has been rigorously solved as well as the problem of finding the composition distribution of the copolymer formed. It has been shown that this distribution is described by a conventional Gauss law and the appropriate parameters are given. Possible generalizations of the suggested approach are indicated.     

金安金沙江悬索桥隧道式锚碇变形破坏机制研究

隧道式锚碇的变形破坏机制涉及到结构与围岩的协同作用问题。以华丽高速公路金安金沙江悬索桥两岸隧道锚变形破坏机制为研究对象,利用工程类比法评价了其稳定性控制要素,设计了超载数值试验。根据塑性区的扩展过程确定了施工安全监测和需要采取预加固的重点部位,确定了隧道锚围岩的破坏模式。根据锚面监测点位移由mm到cm量级突变确定的两岸锚岩系统极限荷载均为6~8倍设计缆力,则锚岩系统的设计承载力取3倍设计缆力下变形安全是有保障的。丽江岸塑性区在10 P下贯通;华坪岸塑性区在14 P下贯通。设计缆力作用下,丽江岸锚碇最大位移1.5 mm、围岩1.2 mm、地表0.5 mm;华坪岸锚碇最大位移1.7 mm、围岩1.5 mm、地表0.7 mm,其响应顺序为后锚面监测点前锚面监测点锚碇中间岩体地表点,可作为后期结构及围岩安全监测布点和预警的参考,也证明当前设计缆力下变形和强度均是安全的。     

Effect of fretting amplitudes on fretting wear behavior of steel wires in coal mines

Given that fretting wear causes failure in steel wires, we carried out tangential fretting wear tests of steel wires on a self-made fretting wear test rig under contact loads of 9 and 29 N and fretting amplitudes ranging from 5 to 180 μm. We observed morphologies of fretted steel wire surfaces on an S-3000N scanning electron microscope in order to analyze fretting wear mecha-nisms. The results show that the fretting regime of steel wires transforms from partial slip regime into mixed fretting regime and gross slip regime with an increase in fretting amplitudes under a given contact load. In partial slip regime, the friction coefficient has a relatively low value. Four stages can be defined in mixed fretting and gross slip regimes. The fretting wear of steel wires in-creases obviously with increases in fretting amplitudes. Fretting scars present a typical morphology of annularity, showing slight damage in partial slip regime. However, wear clearly increases in mixed fretting regime where wear mechanism is a combination of plastic deformation, abrasive wear and oxidative wear. In gross slip regime, more severe degradation is present than in the other regimes. The main fretting wear mechanisms of steel wires are abrasive wear, surface fatigue and friction oxidation.     

潜器Stewart平台动力学仿真

建立了Stewart平台的动力学模型,对潜器的动力学特征进行分析,对其运动进行动力学仿真研究.以Stewart平台的任意支腿为研究对象,考虑各支腿的重力和惯性力,利用牛顿-欧拉方法建立了支腿及动平台的力和力矩平衡方程,推导出了Stewart平台的动力学方程及支腿所受的支反力.以潜艇模拟器并联机构为例,运用动力学模型进行了实际计算并绘制了支腿驱动力的变化曲线,将驱动力与支腿运动速度相乘得到支腿功率输出的变化曲线,为液压油缸的功率设计提供了依据,也为潜器的精确动力学解耦奠定了基础.