石油化工装备“后果分析”方法的介绍

石油化工装备的失效,由于所处理的物料常常是易燃易爆的化学品,所以往往导致发生燃烧、爆炸等,还可以波及附近的其它装置和设备发生连锁的失效和爆炸。为了分析这种严重事故可能造成的影响,研究防止这种事故的发生,近年来研究和发展了一种定量估计这种失效后果严重程度的方法,称为后果分析(Consequence Analysis)。通过分析,从这些设备的失效概率、可能发生的失效形式,研究设备内物料的泄漏形式、可能发生的后果、影响范围的大小、对周围装置、环境和人员的危害程度等,从而提出在设备设计、工厂的总图设计中采取的措施,以减轻其危害的程度。     

Extraction of 2-hydroxyphenol by surfactant coated nanosized magnetic particles

A colloidal suspension of magnetic particles coated with double layer surfactant molecules was prepared, characterized and used for separation of some chemicals. The aqueous magnetic fluid was prepared by chemical precipitation method and characterized by total organic carbon analyzer (TOC), thermogravimetric analysis (TGA) and transmission electron microscopy (TEM). The TOC and TGA measurements indicate that the prepared magnetic particles are coated with surfactant molecules in double layers. The outer surfactant layer has free polar heads. TEM measurement results show that magnetic particles are nanosized. A mixture of 2-hydroxyphenol (strong polar) and 2-nitrophenol (weak polar) was chosen as the target system. Results show that the magnetic fluid can selectively adsorb 2-hydroxyphenol from the mixture, whereas the adsorption of 2-nitrophenol is insignificant. For 2-hydroxyphenol, the adsorption equilibrium can be described well by Langmuir isotherm, and the adsorption kinetic can be fitted well by a linear driving force mass transfer model.     

静压支承技术在海水淡化旋转式能量回收装置中的应用

海水淡化旋转式能量回收装置（RERD）高、低压流体间的泄漏主要在转子与端盘的配合间隙中发生，这种泄漏直接影响到装置的能量回收效率水平。本文通过在平面端盘上引入阻尼孔和静压支承槽，构建了静压支承端盘方案，将静压支承技术应用到自主开发的电驱RERD装置中，以解决其运行过程中泄漏量大、能量回收效率低等问题。在转子与上、下端盘配合总间隙为0.04mm、转子转速为500r/min的条件下，RERD分别使用平面端盘和静压支承端盘进行对比实验研究。结果表明，在操作压力为4.5MPa和处理量为13m³/h的工况下，与平面端盘相比，采用1^#静压支承端盘（静压支承槽槽宽为2.0mm）时，装置的泄漏量从0.45m³/h减小至0.28m³/h，能量回收效率从91.3%提升至92.7%。采用2^#静压支承端盘（静压支承槽槽宽为3.0mm）的RERD在相同工况下，装置的泄漏量可降低至0.11m³/h，能量回收效率提升到95.0%。上述研究显示静压支承技术对于减小RERD装置泄漏量、提高装置效率具有显著的效果，对RERD装置密封结构设计与优化具有指导意义。     

磁力驱动器涡流损失的研究

对磁力驱动器金属隔离套在交变磁场中引起的涡流损失进行了理论计算 ,并与实测结果进行了对比。指出合理选择金属隔离套的相关参数 ,可以有效控制涡流损失的大小     

校园网网络计费相关的网络管理问题研究

网络流量计费是一种常见的网络管理手段。网络计费中经常遇到对流量统计结果的质疑、IP地址抢夺和账号被盗等三类问题。针对上述三类问题,通过网络管理的手段给出了分别的解决方案。     

氨合成塔催化剂中毒原因分析及处理

介绍合成塔催化剂因合成气压缩机段间水冷器泄漏而致水中毒的情况，分析水中毒的原因及处理过程，介绍了段间水冷器泄漏情况下装置的运行方案。     

建筑结构粘结剂的研究进展

在综合分析国内外文献的基础上,本文简述了粘结剂的发展历史,它在建筑业中的应用现状及在现代建筑业中的地位;研究了建筑结构粘结剂的主要性能指标,粘结剂连接的优点和主要技术检验指标等.此外,对目前广受关注的粘结剂耐久性研究的试验方法做了总结,列举了最新研究进展.在此基础上,指出了目前研究的不足,提出了对研究方向的建议.     

Surface-initiated atom transfer radical polymerization of methyl methacrylate on magnetite nanoparticles

The synthesis of magnetite nanoparticles coated with a well-defined graft polymer is reported. The magnetite nanoparticles with an initiator group for copper-mediated atom transfer radical polymerization (ATRP), 2-(4-chlorosulfonylphenyl) ethyltrichlorosilane (CTCS) chemically bound on their surfaces were prepared by the self-assembled monolayer-deposition method. The surface-initiated ATRP of methyl methacrylate (MMA) was carried out with the CTCS-coated magnetite nanoparticles in the presence of free (sacrificing) initiator, p-toluenesulfonyl chloride. Polymerization proceeded in a living fashion, exhibiting first-order kinetics of monomer consumption and a proportional relationship between molecular weight of the graft polymer and monomer conversion, thus providing well-defined, low-polydispersity graft polymers with an approximate graft density of 0.7 chains/nm². The molecular weight and polydispersity of the graft polymer were nearly equal to those of the free polymer produced in the solution, meaning that the free polymer is a good measure of the characteristics of the graft polymer. The graft polymer possessed exceptionally high stability and remarkably improved dispersibility of the magnetite nanoparticles in organic solvent.     

Movement characteristics of Karst water in a deep mining area

In order to study the movement characteristics of groundwater in a deep mining area and solve the dispute of the distri-bution rule of hydro-chemical zoning which is contradicted by lixiviation water zoning in a horizontal direction, we directed our attention to the source of deep groundwater, its seepage and hydro-chemical characteristics in a typical mining area. We used a neotectonic water-control theory, chemical and isotope methods, as well as a method for analyzing dynamic groundwater conditions. The results indicate that 1) Karst water in the deep and medium parts of this mining area is recharged by vertical leakage through neotectonic fractures rather than seepage along strata from subcrop parts or surrounding flows; 2) from surface to deep leakage paths, the variation in the types of chemical groundwater agrees with the normal lixiviation water distribution rule and the age of mixed groundwater increases; 3) the water-rich zones along neotectonic fractures correspond with water-diluted zones in a hori-zontal direction; 4) the leakage coefficient and water capacity of aquifers increases during the flow process of Kant water along the antidip direction (from west to east) and 5) Karst water in shallow mining areas forms a strong runoff belt along strikes and quickly dilutes the water from deep and medium mining areas. Overall, chemical and dynamic water characteristics actually agree with in terms of the entire consideration for differences in vertical leakage and abnormalities in the zone of water chemical distribution, along a horizontal runoff direction.     

Damage and deterioration mechanism and curing technique of concrete structure in main coal cleaning plants

Concrete structures in main coal cleaning plants have been rebuilt and reinforced in the coal mines of the Shanghai Da-tun Energy Sources Co. Ltd., the first colliery of the Pingdingshan Coal Co. Ltd. and the Sanhejian mine of the Xuzhou Mining Group Co. Ltd. In these projects, the operating environment and reliability of concrete structures in the main plants of the three companies were investigated and the safety of the structures inspected. Qualitative and quantitative analyses were made on the spe-cial natural, technological and mechanical environments around the structures. On the basis of these analyses, we discuss the long-term, combined actions of the harsh natural (corrosive gases, liquids and solids) and mechanical environments on concrete structures and further investigated the damage and deteriorating mechanisms and curing techniques of concrete structures in the main coal cleaning plants. Our study can provide a theoretical basis for ensuring the reliability of concrete structures in main coal cleaning plants.