电熨斗底板水溶性聚四氟乙稀真空静电喷涂工艺

介绍了电熨斗底板真空静电喷涂的工作原理。说明了电晕放电在底板真空静电喷涂中的作用。分析了氟涂料微粒的带电过程及影响因素。这个工艺对产品质量提高的作用进行了分析。     

化学模式识别法在钢铁工业中的若干应用

本文涉及一种崭新的非函数数据处理法及其在工业诊断和优化中的应用。并对其进行要因分析和优化决策的原理作了介绍。结合钢铁工业生产中的实例进行了分析。还探讨了该方法在钢铁工业中应用的意义。     

抽油机球铁齿轮的化学成分及生产工艺

为提高抽油机减速器齿轮铸件的机械性能，提出以Sn代替Mo作为合金元素，并通过试验确定了合理的Si、Cu、Sn的加入量。指出Si加入量应控制在1．9％－2．1％范围内，同时加入0．36％～0．9％的Cu和0．025％～0．07％的Sn，可保证球铁的强度和延伸率都满足QT700－2的要求。鉴于试件与实际铸件的表面硬度有一定的差值，为提高铸件表面硬度，进行了余热正火试验，并给出了铸件在铸型内的时间－冷却温度曲线。最后根据球铁化学成分的选择结果，进行了齿轮生产试验。     

定向凝固空心叶片制壳工艺的改进

分析了在先进发动机定向凝固空心叶片熔模精密铸造生产中出现两种缺陷的性质和产生原因，从壳型制造工艺方面提出了改进措施，提高了叶片合格率。     

大型离心复合球墨铸铁轧辊的生产

简述了我公司为舞阳铜厂试制４２００ｍｍ厚板轧机离心复合球墨铸铁轧辊的性能要求、内外层双重金属铸造工艺参数的选择及整个铸造生产工艺过程。     

Benzylation of thiophene using zinc and iron chloride modified montmorillinite clay

Montmorillinite clays, modified with either Zn(II) or Fe(III) chlorides have been used to catalyze the Friedel-Crafts alkylation of thiophene. High yields (ca. 80%) of 2- and 3-benzylthiophene mixtures were obtained using either catalyst in chlorobenzene or nitrobenzene solvent at 80°C. The ratio of 2–3-products was found to be controlled by their relative stability. Reactions were most rapid in nitrobenzene solution (<5 min) and resulted in formation of the 2-isomer as the only mono-substituted product. This is believed to be the first example in which an alkylation of thiophene has been limited to one regio-isomer.     

New Ferro Powder for Selective Laser Sintering of Dense Parts

The paper describes a new powder composition specially developed for selective laser sintering (SLS). The aim is to obtain a ferro powder that can be sintered without need for a (sacrificial) polymer binder and that results in quasi dense parts that do not need any post-processing like furnace sintering, infiltration or HIP. The powder is a mixture of different types of particles (Fe, Cu, Ni and Fe₃P). The composition and mixture ratio are justified by using phase diagrams. The powder has been tested using an own developed Nd: YAG SLS machine. The influence of process parameters (laser power, scan velocity, scan spacing and scan strategy) and the microstructural characteristics have been investigated. Attention is devoted to the binding mechanism (liquid phase sintering, through melting) and to the quality of resulting parts (density, balling effect,…).     

Colour extension properties of individual pigments and effects on shades of foundations in cake form

The mechanism of colour change during the pigment dispersion process and during powder application to the skin surface was studied by examining the colour extension properties of Yellow. Red , and Black iron oxides in white powder bases. A new measure for the evaluation of the degree of colour extension was devised. This measure corresponded well with human visual sensation, and was found to be useful for comparing the rates of colour extension of pigments. The rate of colour extension of pigments was found to vary in the order: Yellow acicular Red granular Red Black. This result explains colour darkening and the change towards reddish tones during the pigment dispersion process, because Yellow extends fully in the early stage of the process but Red , especially in granular form, and Black continue to extend even in the later stage. Acicular Red iron oxide is more favourably employed than the granular form to attain sufficient colour extension of foundations with lower energy expenditure, and to decrease the discrepancy between the cake colour and the colour of applied powder.
Le développement des oxydes de fer et effet sur les nuances des fonds de teint compacts     

高炉煤气干法除尘技术发展现状及宝钢应用前景

在对高炉煤气干法除尘技术应用现状进行综合分析的基础上结合宝钢实际，提出宝钢应用此技术的相关建议。