龙潭水电站励磁装置可控硅易损原因及改进措施

通过龙潭水电站对励磁装置可控硅元件实施过电压保护改进前后实际效果的分析,介绍了一种有效的过压保护方式.     

常减压装置设备腐蚀分析及防护措施

文章介绍了中国石油化工股份有限公司齐鲁石化分公司胜利炼油厂第二常减压蒸馏装置的总体情况,分析总结了装置在2000-2005年期间停工闲置及开工运行过程中设备腐蚀情况和防护中所做的工作,可供相似类型、相似状态的装置借鉴。     

Structural modifications and fibre processing of hydroxy-functionalised mesogenic polyazomethines

A number of semiflexible homopolyazomethines and copolyazomethines based on hydroxy-functionalised mesogenic cores have been synthesised and characterised. The reported polymers include structural modifications such as an alteration of the coaxiality, shortening of the flexible spacers or copolymerisation to attain materials with reduced melting temperatures and suitable processability. These structural alterations have been introduced by condensing different ,ω-bis-[(4-formyl-3-hydroxyphenyl)oxy]alkanes with 2-methyl-1,4-phenylenediamine and/or 4-methyl-1,3-phenylenediamine. Fibres have been melt extruded from those nematic polyazomethines with the most favourable thermal properties. As-spun and tension-annealed fibres have been investigated by thermal analysis (TGA and DSC), X-ray diffraction and SEM microscopy in an attempt to infer a relationship between microstructure and tensile properties. From the results presented here, copolymerisation incorporating flexible spacers of different lengths seems to be the best strategy to balance ease of processing and tensile properties. Some of the fibres have improved mechanical properties compared with those previously reported for this class of semiflexible polyazomethine. A nematic polyazomethine with a decamethylenic spacer has also been modified with low percentages of several metal ions [Fe(III), Zn(II), V(IV) and Ni(II)] in order to establish a comparison with previously reported Cu(II)-modified fibres.     

Fracture toughness of PAN-based carbon fibers estimated from strength-mirror size relation

Fracture toughness (K_IC) of representative high-strength type PAN (polyacrylonitrile)-based carbon fibers, Torayca™ T300 and T800H, with or without artificial surface defects, were estimated to be ca. 1 MPam^1/2 from the tensile strength vs. fracture mirror size relation, assuming a constant crack-to-mirror size ratio. The corresponding critical energy release rate (Γ) was ca. 7.4 J m⁻², which was close to the value derived from the reported surface energies for a graphite crystal. Similar K_IC values were obtained for the old-type PAN-based carbon fibers from the reported data by the use of the present estimation procedure.     

高校摄录编播设备数字化改造探析

为了用有限的资金建设一个高标准、现代化的适合高校现代教育技术需要的数字化摄录编播系统，结合实际，详细介绍一种适合高校重大事件记录、课件制作及教学片拍摄、可以满足高校多种需求的数字化摄录编播设备的合理化配置。     

火炮身管内表面激光硬化处理的实验研究

提高身管寿命是火炮行业亟待解决的关键技术问题，激光表面改性技术是解决这一问题的有效方法之一。本文在分析激光表面相变硬化性能的基础上，对身管内表面进行了激光硬化处理实验研究，检测了其内表面阳线和阴线的硬化层硬度和深度，对比分析了离焦量和焦深对其内表面硬化层硬度的影响，并对激光相变硬化层金相组织进行了分析。经激光硬化处理后，身管的内表面硬度有明显提高，硬化层较深，且为很细的条状马氏体组织。     

Fracture and deformation properties of Ni-Fe superalloy in cryogenic high magnetic field environments

The present paper includes experimental and analytical data on the fracture properties of a nickel-iron superalloy, a ferromagnetic austenite, at 4 K in magnetic fields of 0 and 6 T. The tensile, notch tensile and small punch tests are employed. A finite element analysis is also performed to convert the experimentally measured load-displacement data into useful engineering information. To interpret the results we review the available theory of the influence of magnetic field on the stress intensity factor for a crack in ferromagnetic materials.     

Inside Front Cover: The Elastic Properties and Plastic Behavior of Two‐Dimensional Polymer Structures Fabricated by Laser Interference Lithography (Adv. Funct. Mater. 10/2006)

The probing of the micromechanical properties within a two‐dimensional polymer structure with sixfold symmetry fabricated via interference lithography reveals a nonuniform spatial distribution in the elastic modulus “imprinted” with an interference pattern in work reported by Tsukruk, Thomas, and co‐workers on p. 1324. The image prepared by M. Lemieux and T. Gorishnyy shows how the interference pattern is formed by three laser beams and is transferred to the solid polymer structure. The elastic and plastic properties within a two‐dimensional polymer (SU8) structure with sixfold symmetry fabricated via interference lithography are presented. There is a nonuniform spatial distribution in the elastic modulus, with a higher elastic modulus obtained for nodes (brightest regions in the laser interference pattern) and a lower elastic modulus for beams (darkest regions in the laser interference pattern) of the photopatterned films. We suggest that such a nonuniformity and unusual plastic behavior are related to the variable material properties “imprinted” by the interference pattern.     

三相全控桥式整流电路实验装置的研制

介绍了开发三相全控桥式整流电路实验装置的背景;叙述了TC787芯片的内部结构、工作原理、特点及芯片的各个管脚的功能;详细介绍了该实验装置的触发电路的设计思路、设计结果和工作原理;介绍了该实验装置的主电路部分的结构和特点。该实验装置性能可靠,符合本科生实验要求。     

CMP系统技术与市场

概述了CMP系统技术的发展历史、发展趋势以及在IC生产中的重要性,介绍了国外CMP设备主要制造厂家的设备型号和性能及CMP设备市场分布和需求,阐述了CMP系统技术的基础研究、关键技术和国内研究概况。