关于第二积分中值定理渐近性的一个注记

对于第二积分中值定理中的搴，本文给出并证明了比文献[3]更一般的结论，文献[3]的有关定理可以看成本文定理的直接推论．     

Micro- and nano-scale deformation behavior of nylon 66-based binary and ternary nanocomposites

The primary aim of this paper is to provide an insight on the effect of the location of organoclay on the micro- and nano-scale deformation processes in melt-compounded nylon 66/organoclay/SEBS-g-MA ternary nanocomposites prepared by different blending sequences. In addition, the deformation processes of the ternary nanocomposites were compared to the binary nanocomposites (nylon 66/organoclay and nylon 66/SEBS-g-MA) and neat nylon 66. The incorporation of SEBS-g-MA particles toughened nylon 66 markedly; but the flexural modulus and strength were both reduced. Conversely, the use of organoclay increased the modulus but decreased the fracture toughness of nylon 66. Nylon 66/SEBS-g-MA/organoclay ternary nanocomposites exhibited balanced elastic stiffness and toughness. Stress-whitening studies of the fracture surfaces in terms of gray level were also performed and an attempt was made to correlate the optical reflectivity characteristics with fracture toughness. It was concluded that the capability of SEBS-g-MA particles to cavitate was decreased by the presence of organoclay in the SEBS-g-MA phase, resulting in reduced toughening efficiency. The best micro-structure for toughness and other mechanical properties is thus to maximize the amount of exfoliated organoclay in the nylon 66 matrix rather than to have it embedded in the finely dispersed SEBS-g-MA particles.     

自主知识产权是提升国家竞争力的核心

科学技术是第一生产力,自主创新是第一竞争力,只有加强自主知识产权的保护,才能调动和保护人们自主创新的积极性,开发更多更高质量的自主知识产品,提高我国经济的国际竞争力,为我国在国际经济竞争中争取主动权。     

The generalized Riemann problem method for the shallow water equations with bottom topography

This paper extends the generalized Riemann problem method (GRP) to the system of shallow water equations with bottom topography. The main contribution is that the generalized Riemann problem method (J. Comput. Phys. 1984; 55 (1):1–32) is used to evaluate the midpoint values of solutions at each cell interface so that the bottom topography effect is included in numerical fluxes, and at the same step the source term is discretized with an interface method in which only mid‐point values are plugged in. This scheme is well balanced between the flux gradient and bottom topography when incorporating the surface gradient method (SGM) (J. Comput. Phys. 2001; 168 (1):1–25) into data reconstruction step, and it is also suitable for both steady and unsteady flow simulations. We illustrate the accuracy of this scheme by several 1‐D and 2‐D numerical experiments. Copyright © 2005 John Wiley & Sons, Ltd.     

C/Cu(Fe)复合材料制备工艺及性能研究

利用三步电沉积法制备C／Cu（Fe）复合材料预制丝，将预制丝缠绕成毛坯，采用真空热压法制备C／Cu（Fe）复合材料．研究表明，真空热压工艺对复合材料力学性能有很大影响，通过力学性能试验和对拉伸断口形貌的分析，得出了制备C／Cu（Fe）复合材料的最佳工艺．     

Fabrication, in vitro Degradation and Cytotoxic Assay of Different Cystalline Phases Calcium Polyphosphate

1Introduction Mostofthematerialsusedhistoricallyarecalcium phosphatessuchashydroxyapatite(HA),tricalciumphosphates(TCP),tetracalciumphosphate(TTCP),and cominationofthevariousphasesofcalciumphosphates[1].Calciumphosphatematerialshavesomeoutstandingprop ert…     

07Cr12NiMoVNb耐热钢疲劳性能研究

对07Cr12NiMoVNb钢进行了常温和550℃旋转弯曲疲劳试验,结果表明,此钢不同晶粒度时疲劳断裂行为相近,室温疲劳强度与静强度关系符合奥金格经验公式,高温疲劳强度与静强度有关,但直线关系的系数不同于常温的,需重新总结。晶粒度大小影响疲劳强度,但室温表现的不明显,550℃表现为细晶钢疲劳强度高,这正好与蠕变行为相反,粗晶钢表现出较高的蠕变强度。     

内蒙古金陶公司矿石工艺矿物特性研究及对选矿工艺影响的分析

对内蒙古金陶公司矿石进行矿石性质和工艺矿物鉴定研究。目的是从矿石性质方面找出影响选矿指标的因素，以便改进选矿工艺流程，从而保证选矿生产获得较好技术指标。     

A Critical Analysis of the Quality Concept and the Scope for Quantitative Estimation

Conditions are derived providing objective values for quantitative indices. It is shown that these conditions cannot be realized for the quality of a material object and consequently quality cannot have an objective quantitative value. __________ Translated from Izmeritel'naya Tekhnika, No. 10, pp. 24–27, October, 2005.     

生成黑盒测试数据的设计思想在学生成绩管理系统中的实现

黑金测试是数据库应用系统测试的常用方法，而生成大量测试数据则是进行黑金测试的前提。如果能使用“数据生成”工具生成大量模拟测试数据，将提高数据库应用系统的测试效率和测试质量。本文主要提出了生成黑金测试数据的设计思想，并基于这一思想开发了“学生成绩管理系统”的数据生成工具。