Genetic algorithms for symbolic clustering

This paper introduces a novel methodology for clustering of symbolic objects by making use of Genetic Algorithms (GAs). GAs are a family of computational models inspired by evolution. These algorithms encode potential solutions to specific problems on simple chromosome-like data structures and apply recombination operators to these structures so as to preserve critical information. A new type of representation for chromosome structure is presented here along with a new method for mutation. The efficacy of the proposed method is examined by application to numeric data of known number of classes and also to assertion type of symbolic objects drawn from the domain of fat oil, microcomputers, microprocessors and botany. The validity of the clusters obtained is examined.     

条形药包药量计算公式探讨

本文通过现有诸药量计算公式的总结和统计分析，认为经验函数划（ｎ）以二次式较合适。并根据流体动力学理论和临界能量密度破碎准则，推导出ｆ（ｎ）的二次项公式，得ｑ＝ＫＷ２（１十ｎ２）／２；该式较符合实际，故推荐供参考。     

节能型铝合金连续熔化－去气炉

介绍一种用于铝合金的连续熔化－去气的节能装置。着重讨论了此装置的结构和操作要点以及影响铝合金质量的因素。文中对比了此装置与传统阶段式熔化系统操作上的异同点。分析了连续熔化炉的经济效益。研究表明毛坯耗电量下降８５％，并可减少合金元素加入量以及坩埚和加热元件的消耗。铸件质量合格。     

小高跨比单层单跨实腹门式刚架平面内弹性整体稳定分析

采用精确的有限元非线性分析方法对小高跨比单层单跨实腹门式刚架的平面内弹性整体稳定性进行了大量的参数分析，指出在梁上均布荷载作用下，当柱梁高跨比小于某一数值时，一般不发生传统理论所认为的反对称失稳模式，而是以对称失稳模式为主。给出了修正的柱计算长度系数，并与规范给出的数值进行了对比，认为这种对称失稳模式更不利于门式刚架的整体稳定，应该引起足够的重视。     

管环缝射线一次透照长度及分段次数的计算

介绍了管环缝射线透照方式，以及环缝单壁外透法和环缝双壁单影法100％射线透照检查一次透照长度及分段次数的计算。     

Isometric Piecewise Polynomial Curves

The main preoccupations of research in computer-aided geometric design have been on shape-specification techniques for polynomial curves and surfaces, and on the continuity between segments or patches. When modelling with such techniques, curves and surfaces can be compressed or expanded arbitrarily. There has been relatively little work on interacting with direct spatial properties of curves and surfaces, such as their arc length or surface area. As a first step, we derive families of parametric piecewise polynomial curves that satisfy various positional and tangential constraints together with arc-length constraints. We call these curves isometric curves. A space curve is defined as a sequence of polynomial curve segments, each of which is defined by the familiar Hermite or Bézier constraints for cubic polynomials; as well, each segment is constrained to have a specified arc length. We demonstrate that this class of curves is attractive and stable. We also describe the numerical techniques used that are sufficient for achieving real time interaction with these curves on low-end workstations.     

GJK-3型高准确度长度测量仪

本文分析了使用计数的原理来测量长度、转速的仪器，其误差产生的原因，并结合G3K-3型高准确度长度测量仪，着重介绍了消除误差的方法．     

Performance comparison of some discrete service time systems

This paper analyzes and compares the slotted time operation and the non-slotted time operation of a singleserver system with deterministic service time. These two operations are commonly used to model discrete service time systems in computer or digital communications. But due to the similarity in their operations and performance, the two models may be mixed up with each other. This paper examines by means of queueing analysis the performance of a few classes of systems that differ in the service order of their customers. The means and variances of the queue lengths, waiting times and interdeparture times of FCFS systems using the slotted time operations are first obtained from their respective LST and generating function equations. These are then used for comparison with those in non-slotted time systems. The results show that although the slotted time operation in the FCFS systems can be approximated by the non-slotted time operations under heavy traffic condition, the performances under other regions and service disciplines (e.g., the LCFS and the priority systems) may deviate significantly. They must be properly adjusted if one wishes to use the simpler equations of the non-slotted time operations to approximate the slotted time operations. The comparison graphs provided in this paper supply adjustments guidelines for the careful designers.     

应用焊道长度控制线能量

运用ＨｅｒｂｓｔＦＷ公式原理对国产碱性条件进行了大量试验，建立了焊接线能量（Ｅ），焊条熔化长度（ｌＥ），焊道长度（ｌＲ）的关系式：Ｅ＝８０８Ｄ１．８ｌＥ／ｌＲ。并应用线算图和ＳＨ－ＣＣＴ图对该式施焊结果验证，热影响区的金相组织，硬度基本一致。因此，可以应用焊道长度校核与控制线能量。