粉末冶金铁基烧结炉的现状与展望

评述了国内外粉末冶金铁基烧结炉的发展动向和具体改进装备。即功能带设计、脱蜡装置,烧结带气氛控制,淬火带的设想,加热元件配置及新型可塑性耐火材料。     

高合金铁基烧结材料在轧钢导位中的应用研究

本文研究了高合金铁基烧结材料在轧钢导位中的应用。实验表明,通过粉末冶金液相烧结技术,可以获得具有优良综合性能的制品,材料密度ρ≥7.5 g/cm3,硬度≥55 HRC,抗弯强度≥1 000 MPa,冲击韧度αk≥3.9 J/cm2,满足了轧钢导位辊的工作要求。材料利用率可达95%以上、降低了制备成本。使用寿命是普通轧辊寿命的3~6倍,适用于线材和小型型材的轧钢生产。     

Development of sealing compositions with nanostructure iron-based fillers

The possibility of utilizing nanopowders of iron and Fe-Co-Ni produced bu a thermochemical method in the fabrication of sealing composition materials is investigated. It is established that such hermetic sealing composition materials function reliably under extremal conditions and guarantee elevated strength of adhesion to the surface of the metal and high corrosion and temperature stability. __________ Translated from Poroshkaya Metallurgiya, Nos. 3–4(448), pp. 112–117, March–April, 2006.     

Mn-containing catalytic materials for the total combustion of toluene: The role of Mn localisation in the structure of LDH precursor

Mg/Mn/Al mixed oxide systems of similar atomic ratios close to 2/0.5/1 were obtained by calcination of Mg,Al layered double hydroxide (LDH) type precursors containing Mn either in the cationic form within the brucite layer or as permanganate anions in the interlayer. The materials were characterised with PXRD, thermal analysis, XPS, ESR, TPR and BET. In mixed oxides derived from interlayer-doped precursor PXRD identified MgO–MnO solid solution and poorly crystalline Al-rich spinel phase, while those obtained from layer-doped LDH contained a better crystalline Mn-rich spinel. Surface of both materials was covered with poorly crystalline and/or amorphous Mn⁴⁺-containing phases. Higher reducibility of this surface coat in calcined layer-doped catalyst, as compared to interlayer-doped one, was attributed to the differences in the nature of underlying crystalline phases, and was considered the chief reason for the higher catalytic activity of this catalyst in the total oxidation of toluene.     

纳米镍粉的制备工艺及产业化研究进展

综述了纳米镍粉的制备方法(包括物理法和化学法)及产业化现状,对纳米镍粉的各种制备方法进行了分析和评价。与物理法相比,化学法的产量高、成本低廉,能制备出性能优异的纳米镍粉,适合规模化生产;使用化学法制备的纳米镍粉的纯度、粒径及成本的控制仍需进一步加强。同时,对今后纳米镍粉的制备和产业化发展提出了建议。     

Synthesis and characterisation of a submicrometre silicon carbide powder

A beta-silicon carbide powder with a surface area of 30m²g^?l and a mean particle size of < 1μm was produced from the thermal conversion of silicon resin in an atmosphere of hydrogen. The amount of product increased with increasing iron content (0–2.1 wt%) and firing temperature (1200–1500°C). Chemical analysis, X-ray diffraction and i.r. absorption spectrometry were used to follow the conversion reaction.     

乳化炸药混装车水孔爆破的优越性

该文分析了应用袋装炸药装填水孔爆破产生拒爆、"冲天炮"、根底偏高和爆破效果差等问题,然而应用乳化炸药混装车装填水孔可以解决这些问题,并且爆破后具有根底平整、大块率低、毒气少和综合效益高等优点.以三峡永久船闸旁侧泄水箱涵工程和江苏田湾核电站工程为例进行了分析.     

超细氧化锌粉体的制备及尺寸控制

根据气相化学反应法 (CAD)制备超细粉的原理 ,从低品位氧化锌矿中采用火法冶金方法直接制备超细氧化锌粉 ,对所得氧化锌的粒度尺寸、微观结构和粒度分布进行测试 ;考察了冷却强度以及收集装置对超细氧化锌粒度及粒度分布的影响 ;讨论了氧化锌粉体团聚的原因及对策、试验条件对氧化锌尺寸的控制等     

土壤固化剂无侧限抗压强度试验研究

针对山西省长治市石子河河道处理问题 ,采用固化剂粘土进行了无侧限抗压强度试验 ,并与水泥土进行了比较。发现固化剂 2的无侧限抗压试验强度最佳 ,为工地现场试验及河道综合治理提供了更为有力的理论依据     

水平浓缩燃烧器在65t/h煤粉炉上的应用

介绍65t/h煤粉炉的基本概况和存在的问题，详细阐述了采用水平浓缩煤粉燃烧技术对原燃烧器的改造过程，对改造前后运行参数及经济效益进行了对比。