厦门市气源转换的技术分析

分析了气源转换时原有输配系统的管道、调压设备、计量设备、用气设备与天然气系统相适应的问题，提出了相应的措施。     

盐和水蒸气协同作用下TiAl合金腐蚀性能研究及其防护

研究了在700℃盐和水蒸气协同作用下TiAlNb合金的腐蚀行为以及溅射涂层对TiAlNb合金的防护作用。结果表明，在盐和水蒸气协同作用下，溅射TiAlCrAg涂层对TiAlNb合金具有一定的保护作用。盐和水蒸气协同作用加速了合金以及涂层的腐蚀。挥发性气体氯化物对α2相的循环作用是TiALNb合金腐蚀的主要原因。涂层中较少的α2相以及Laves相中较高的Cr含量是腐蚀有所减缓的主要原因。     

管道防腐层的失效及对策

介绍了管道防腐层失效的原因和方式。指出水和氧气是防腐层失效的原因,含水量和含氧量决定腐蚀程度,应采取有效措施对防腐层进行及时检查与修复。     

玻璃与金属封接用杜美丝

利用ＡＥＳ、ＷＤＳ和ｘ－射线衍射等方法，研究了杜美丝表面层、铁镍芯与覆铜层界面的微观结构与特性。结果表明：良好的表面层应由Ｃｕ２Ｏ和非晶态的硼砂构成；玻璃与杜美丝的润湿性决定于表面层的净化程度和构成及加热条件。     

LD泵浦Nd：YVO4内腔倍频激光器获得120mW绿光连续输出

利用半导体激光器（ＬＤ）端面泵浦Ｎｄ：ＹＶＯ＿４和用ＫＴＰ内腔倍频的绿激光器获得了１２０ｍＷ连续、稳定的５３２ｎｍ绿激光输出。泵浦阈值Ｐ＿（ｔｈ）＝１６０ｍＷ，光－光转换效率η＿ｓ＝８．１％。换用激光腔输出耦合镜，在不加ＫＴＰ晶体倍频时，可连续输出１．０６μｍ的红外激光，输出功率为４５０ｍＷ，光－光转换效率为３１％。     

LASER CLADDED TiCN COATINGS ON THE SURFACE OF TTTANIUM

Laser cladded coatings of TiCN were produced on the surface of titanium. To obtain the optimal techniques, several conditions were tested by varying the laser scanning rate. The choice of shielding gas was also studied. The cladded coatings were then evaluated from the surface mechanics point of view based on their microhardness. The microstructure of some interesting samples was investigated by optical micrographs （OM）. The results showed that under the condition of fixed pulse frequency and pulse width, the laser scanning rate and the shielding gas are the main factors influencing the components of coatings. TiCN coatings were decompounded and oxidized during the cladding process in the condition of no shielding gas of N2. X-ray diffraction results indicated that the composite coatings composed of TiCN, TiC, Ti2N, and TiO2 were produced using appropriate techniques. The results indicated that the best condition in terms of the surface microhardness is obtained when the scanning rate is 1.5mm/s, the pulse frequency is 15Hz, the pulse width is 3.0ms, and N2 is chosen as the shielding gas. The microhardness of the composite coatings is about 1331kg · mm^-2, which is about 4 times that of the substrate. The optical micrographs indicated that the cladding zone is made up of TiCN, TiO2 and some interdendritic Ti, but the diffusion zone mainly consists of the dendrites phase, and the cladded depth is about 80μm, which is more than 2 times that of the laser nitrided sample. There were no microcracks or air bubbles in the cladded sample, which was cladded using the above optimal techniques.     

Volumetric three‐dimensional up‐conversion display medium

Abstract— Several rare‐earth‐doped fluoride crystals that are excited to emit visible light by sequential two‐photon absorption have been investigated as display‐medium candidates for static volumetric three‐dimensional displays. Dispersion of powders of these materials in a refractive‐index‐matched polymer is reported because such a medium may result in a scalable display. The scattering problem in such a medium is greatly reduced by index‐matching the polymer to the crystalline particles. An index‐matching condition that optimizes the performance is identified.     

In-situ birefringence microscopy of uniaxially stretched metal-polymer laminate

This paper concentrates on revealing the local deformation as a function of applied strain in a polymer coating supported by a plastically deforming and roughening metal substrate. To this end in-situ birefringence microscopy measurements have been executed. The measurements are performed in reflection and an alternative unwrapping scheme for the optical path difference is proposed. From the characterization of PET (polyethylene terephthalate) coated stainless steel it is concluded that strain localization appears below the macroscopic strain at yield and that the surface roughness of the substrate is the driving force of the localization.     

钢结构的防火及防火涂料的涂装

详细了介绍了锦州石化公司体育馆及附属设施钢架结构的防火及防火涂料涂装;讨论了钢架结构的防火,并且制定涂层的设计方案、施工工艺及质量验收标准等。