A new multiferroic ternary solid solution system: NdFeO3–Pb(Fe1/2Nb1/2)O3–PbTiO3

Ceramic materials were sintered from powders of the NdFeO₃–Pb(Fe_1/2Nb_1/2)O₃–PbTiO₃ (NF–PFN–PT) ternary system synthesized by the conventional solid reaction method and their multiferroic properties investigated. The structure, electric and magnetic properties of the ternary system have been investigated. The introduction of Pb(Fe_1/2Nb_1/2)O₃ into the NdFeO₃–PbTiO₃ binary system can effectively increase its electric properties. The ternary system exhibits enhanced piezoelectric property with optimal piezoelectric constants d₃₃=143 pC/N, reduced coercive fields E_C=5.78 kV/cm and remnant polarization P_r=12.8 μC/cm² for 0.10NF–0.56PFN–0.34PT, near tetragonal phase region. The Curie temperature (T_C) of the NdFeO₃–Pb(Fe_1/2Nb_1/2)O₃–PbTiO₃ ceramics varies in the range from 108.7 °C to 67.9 °C. The magnetic hysteresis loops show that the ternary system is paramagnetic originating from canting of paramagnetic sublattices in NF–PFN–PT, due to the rare earth ions Nd³⁺ influencing on the exchange interaction between Fe³⁺ ions at the octahedral sites.     

Crystal texture selection in epitaxies of orthorhombic antiferromagnetic YMnO3 films

The orthorhombic phase of YMnO₃ has been epitaxially stabilized on SrTiO₃ single crystal substrates. Changing the substrate orientation, the out-of-plane orientation of the epitaxial films can be tuned to (001), (101), or (100). Depending on the orientation, the films present varied crystal domain structures and lattice strains. Single domain YMnO₃(100) films have been grown on SrTiO₃(110) substrates, whereas they present two and three crystal variants on SrTiO₃(001) and SrTiO₃(111), respectively. Epitaxial stress in each domain is anisotropic, tensile in one direction and compressive in the other. It has consequences in the texture selection when domains with different out-of-plane orientation can grow epitaxially. Antiferromagnetism of YMnO₃ films has been confirmed by measuring the exchange bias field induced in an underlying ferromagnetic SrRuO₃ layer.     

Effect of electric poling on structural,magnetic and ferroelectric properties of 0.8PbFe0.5Nb0.5O3-0.2BiFeO3 multiferroic solid solution

The effect of electric poling on structure, magnetic and ferroelectric properties of 0.8PbFe_0.5Nb_0.5O₃-0.2BiFeO₃ (0.8PFN-0.2BFO) multiferroic was studied through XRD, Raman, magnetic and ferroelectric measurements. Single step solid state reaction method was adopted to synthesize single phase 0.8PFN-0.2BFO multiferroic at lower calcination and sintering temperature. Room temperature (RT) XRD pattern before and after poling confirmed the monoclinic structure with Cm space group. Rietveld refined XRD for poled and unpoled sample shows the influence of electric poling on Fe-O1, Fe-O2, Nb-O and Bi-O modes. There is a small variation in the lattice parameters after electric poling. The structural properties were also studied in detail for the poled and unpoled 0.8PFN-0.2BFO using Raman spectroscopy. Raman measurements were carried out over a wide range of temperature (250–550 K) for both poled and unpoled samples. At RT unpoled 0.8PFN-0.2BFO multiferroic exhibit 8 active modes at 211, 263, 440, 484, 571, 706, 785 and 1120 cm^-1 in the frequency range 100–1200 cm^-1. The Raman peaks exhibits significant changes in intensity as well as shape of the spectra at the characteristic temperature T_C (470 K) and T_N (310 K). Poled Raman spectra show major changes in the Fe/Nb-O modes intensities around T_N and are due to dynamic nature of spin phonon coupling. Changes observed in the temperature dependent magnetic measurements i.e. ZFC/FC and M − H loop evidence the existence of converse magneto-electric coupling (CME) and this is due to the poling effects on Fe-O, Nb-O active modes. Due to rotation of the oxygen octahedral the electric field induced strain will originate in the system. P-E loops after poling show an increase in remnant polarisation and coercive field due to an improvement in domain ordering. The potential tunability of magnetisation with electric poling is an ideal tool for realisation of application in practical devices.     

Effect of non-magnetic Al3+ doping on structural,optical, electrical,dielectric and magnetic properties of BiFeO3 ceramics

Pure BiFeO₃ (BFO) and Al doped BFO samples were synthesized via citrate precursor method and sintered at 500 °C for two hours. Effect of Al doping on the structural, optical, electrical, dielectric and magnetic properties were investigated. X-ray diffraction (XRD) confirmed the distorted rhombohedral structure without any merging of peaks which indicates no structural transformation. Average crystallite size was found to be in the range 28–39 nm. Field emission scanning electron microscopy (FESEM) images illustrated the dense, agglomerated, spherically shaped with reduced grain size nanoparticles. Increased value of dielectric constant with low dielectric tangent loss was observed for the Al doped BFO samples. The value of dielectric constant was found to be 51 at 100 kHz for x = 0.1 sample. Temperature dependent dielectric constant showed a dielectric anomaly, indicating the antiferromagnetic transition. The remanent polarization and the corresponding coercive field for x = 0.1 was found to be 0.0625 µC/cm² and 56.154 kV/cm at an operating voltage of 1000 V. The improved electrical properties with low leakage current density were ascribed to the stabilization of the pervoskite structure and reduced oxygen vacancies.     

Effects of Nd3+ and high-valence Nb5+ co-doping on the structural,dielectric and magnetic properties of BiFeO3 multiferroics

Bi_0.90Nd_0.10Fe_1?xNb_xO₃ (0 ≤ x ≤ 0.05) multiferroics have been studied to reveal the effect of Nb doping on the physical properties of the neodymium modified BiFeO₃. These samples have been synthesized via conventional solid state reaction method. The structural characterization was performed by XRD technique and Rietveld refinement. Rietveld refinement results confirmed that all samples crystallized in rhombohedral symmetry. In the vicinity of anti-ferromagnetic Neel-temperature (T_N), an anomaly was observed in dielectric constant (?′) and loss tangent (tan δ) which indicates the existence of magnetoelectric coupling. It is observed that with Nb doping dielectric constant was reduced and Neel temperature shifted towards higher temperature. The impedance (Nyquist plots) and modulus spectroscopy revealed that materials possess non-Debye type of relaxation. The doping of donor ion is able to suppress the existence of oxygen vacancies which results in increase in resistivity. The B-site doping by higher valence ion suppresses the existing modulated spin structure by structural distortion, results in released net magnetization. The room temperature remanent magnetization increased with Nb doping and all powder samples possess weak ferromagnetism. The possible reasons for the notable magnetic and dielectric performance of prepared samples were discussed.     

Evolution of Relaxor Behavior in Multiferroic Pb(Fe2/3W1/3)O3-BiFeO3 Solid Solution of Complex Perovskite Structure

Mutiferroic materials like bismuth ferrite BiFeO₃ have attracted much interest in the last decade due to their promising potential for such applications as spintronics and magnetoelectric data storage devices. On the other hand, relaxor ferroelectrics have been intensively studied for their complex structures with quenched disorder and polar nanoregions which play an important role in their outstanding piezoelectric performance. Much less studied are the single-phase multiferroics that exhibit ferroelectric and/or magnetic relaxor behavior and the correlation between their structure and intricate magneto-electric interactions. In this work, we investigate the evolution of the structure and relaxor behavior in the solid solution between the complex perovskite multirelaxor Pb(Fe_2/3W_1/3)O₃ [PFW] and canonical multiferroic BiFeO₃ [BFO], (1-x)PFW-xBFO (with a solubility limit of x = 0.30). The temperature dependences of the dielectric permittivity and loss tangent measured in the frequency range from 100 Hz to 1 MHz indicate characteristic relaxor ferroelectric properties for compositions of x ≤ 0.15, with a frequency-dependent dielectric permittivity peak and its temperature, T_m, satisfying the Vogel-Fulcher law. Detailed studies of the evolution of the relaxor behavior with composition reveal that T_m decreases firstly with a small amount (x = 0.05) of BFO substitution and then increases with further increase of BFO concentration. The degree of relaxor character, as defined by ΔT_m [T_m (1 MHz) - T_m (100 Hz)], increases monotonously with increasing BFO content, signifying an enhancement of relaxor behavior with BFO substitution, which is confirmed by the Lorenz-type quadratic variation of the static permittivity. A temperature - composition phase diagram is constructed in terms of the characteristic Burns temperature (T_B) and freezing temperature (T_f), which delimits a paraelectric state (PE) above T_B, a non-ergotic relaxor state (NR) below T_f, and an ergotic relaxor state (ER) in between. The observed enhancement of relaxor behavior is explained by an increase in the number and size distribution of polar nanoregions in the ER phase, resulting from increased compositional and charge disorders as a result of BFO substitution. The evolution of relaxor behavior and its microscopic mechanisms studied in this work are insightful for a better understanding the multirelaxor properties in multiferroics. Moreover, further substitution of BFO (x ≥ 0.2) flattens the permittivity curves and leads to a temperature-stable variation of high dielectric constant (≈ 10³) in a wide temperature range, making the PFW-BFO solid solution attractive for such applications as high energy density capacitors.     

Multiferroic (Nd,Fe)-doped PbTiO3 ceramics with coexistent ferroelectricity and magnetism at room temperature

We report the structural, dielectric, elastic, ferroelectric and ferromagnetic properties of multiferroic (Nd, Fe)-doped PbTiO3 perovskite ceramics with composition (Pb_0.88Nd_0.08)(Ti_0.94Fe_0.04Mn_0.02)O₃, prepared by different solid state reaction methods: the first one based on a single-stage calcination (Method I) and the second based on a double-stage calcination (Method II). Structural, dielectric and anelastic measurements evidenced a double phase transition for samples prepared by Method I, which has been attributed to phase separation. This phase separation has been confirmed also by TEM and HRTEM investigations. Samples prepared by Method II showed a single phase transition from paraelectric to ferroelectric phase. We found coexistent ferroelectric and ferromagnetic properties, also at room-temperature, but only for ceramics prepared by Method II. The crucial role of calcination process for avoiding phase separation and obtaining homogeneous structures with ferroelectric and ferromagnetic order is underlined.     

Phase pure synthesis of BiFeO3 nanopowders using diverse precursor via co-precipitation method

Amorphous powder of BiFeO₃ (BFO) was synthesized at low-temperature (80 °C) by co-precipitation method. Optimal synthesis conditions for phase pure BFO were obtained. Powders were calcined in the temperature range from 400 to 600 °C for 1 h. Iso-statically pressed powder was sintered at 500 °C for 2 h. Differential scanning calorimetric thermo-gram guided for phase transition, crystallization and melting temperatures. X-ray diffraction confirmed the amorphous nature of as synthesized powder and phase formation of calcined powders. Calcination at temperature ≥400 °C resulted in nano crystalline powders with perovskite structure. Average crystallite size increased with the increase in calcination temperature. Scanning electron microscopic studies revealed dense granular microstructure of the sintered samples. The sintered samples exhibited high dc resistivity at room temperature which decreased with the increase in temperature. Dielectric constant, dielectric loss tangent and ac conductivity measurements were carried out in the frequency range (10 Hz to 2 MHz). The samples responded weak electric and magnetic polarization at room temperature with unsaturated and hysteresis free loops, respectively.     

Effect of A site and B site doping on structural, thermal, and dielectric properties of BiFeO3 ceramics

Polycrystalline Bi_1−xBa_xFe_1−yM_yO₃ (M = Co and Mn; x = 0.1, y = 0.1) were synthesized by solid-state route method to study the compositional driven structural transformations in multiferroics. Room temperature X-ray diffraction patterns confirmed the formation of perovskite structure. Rietveld-refined crystal structure parameters revealed the existence of rhombohedral R3c symmetry for both the samples. The samples were found to be nearly free from any other secondary phases. Raman analysis reveals that Ba atom substitutes Bi site and Mn and Co atom substitutes Fe site into the BiFeO₃ with the shifting of phonon modes. The red shift is attributed to Co or Mn doping where as blue shift occurs from Ba doping. The differential scanning calorimetry reveals the corresponding Neel temperature 370 °C and 326 °C for Co and Mn doped samples. Ba and Co substitution with x = 0.1 and y = 0.1 has not affected the Neel temperature of the parent BiFeO₃ as well of Ba and Mn substitution. The variation of frequency dispersion in permittivity and loss pattern due to A-site and B-site substitution in BiFeO₃ was observed in the dielectric response curve.     

Impedance spectroscopy and dielectric properties of Ce and La substituted Pb0.7Sr0.3(Fe0.012Ti0.988)O3 nanoparticles

We present the structural, microstructural, dielectric and impedance behavior of Pb_0.7Sr_0.3[(Fe_2/3Ce_1/3)_0.012Ti_0.988]O₃ (PSFCT) and Pb_0.7Sr_0.3[(Fe_2/3La_1/3)_0.012Ti_0.988]O₃ (PSFLT) nanoparticles. These nanoparticles were prepared by a chemical synthesis route using polyvinyl alcohol as surfactant. The X-ray diffraction pattern shows polycrystalline nature with coexistence of tetragonal and cubic phase in both PSFCT and PSFLT nanoparticles. The average particle size has been measured using Scherer's relation. The average particle sizes also measured by TEM are 10 and 11 nm, and by SEM 9 and 12 nm, respectively, of PSFCT and PSFLT nanoparticles. By measuring the value of relative permittivity (?′) and loss (tan δ) at lower frequency, the dielectric properties show Maxwell-Wagner type interfacial polarization. However, due to nano size effect of PSFCT and PSFLT, dispersionless dielectric response has been observed up to higher frequency of 15 MHz. The frequency dependent real (Z′) and imaginary (Z″) parts of impedance confirmed the variation which was observed in dielectric properties. The values of resistance of grain boundaries, R_gb is higher than grains, R_g indicates that the effect of grain boundaries is dominant on electrical properties when the size of nanoparticles is quite small.