Hydrogen Absorption and Release Behavior in Hydrogen Decrepitation Process of Nd-Fe-B Alloys

The behavior of hydrogen absorption and release in hydrogen decrepitation (HD) process of Nd-Fe-B alloys were investigated. The results reveal that the reactivity and the amount of hydrogen absorption in HD process are related to the surface activity of the alloy so that the fresh and active surface has a higher efficiency. The presence of Nd-rich phase at the grain boundary is an essential factor of the HD activity of the alloy at room temperature. On degassing, hydrogen is released from the HD powder continuously with increasing temperature. And the residual hydrogen is as low as 0.0015% at 1073K, which shows that the hydrogen is almost exhaused. It is feasible to remove the hydrogen from the HD powder by heating treatment at the temperature of 523-723K for 1h prior to the magnetic field forming in order to decrease the harmful effect of hydrogen on the easy axis alignment of HD magnet.     

147Nd 531 keV γ射线发射几率的精确测量

用4πβ-γ符合装置和HPGe γ谱仪精确测量了 147Nd 531 keV γ射线的发射几率,测量结果为(13.11±0.17)%.与以往报道的数据相比较,本测量结果的准确度明显改善.     

Nd：MgO：LiNbO3晶体的荧光光谱及其双晶体腔内互倍频实验

采用激光感生荧光技术测量了Ｎｄ：ＭｇＯ：ＬｉＮｂＯ３晶体的偏振荧光光谱，简要地说明了Ｎｄ：ＭｇＯ：ＬｉＮｂＯ３双晶体腔内互倍频的基本原理，并在实验中用染料激光作泵浦源实现了其双晶体腔内互倍频运转；得到５４３ｎｍ横模倍频绿光单端输出约ＹＭＷ，腔前泵浦阈值约３８ＭＷ，总转换效率约为１．３％。     

双波长Nd：YAG脉冲激光器的实验研究

根据多波长同时振荡条件，我们建立了大能量１０６４ｎｍ和１３１８ｎｍ同时运转的双波长脉冲Ｎｄ：ＹＡＧ激光器。得到了１０６４ｎｍ和１３１８ｎｍ的激光输出能量分别为０．５９４Ｊ和０．８６１Ｊ，效率分别为０．３１％和０．４５％。实验结果说明了该双波长激光器有较好的时间和空间重选性。     

YAG激光打标机光笔中会聚出纤光的光学系统

智能化大幅面激光打标机中的光笔,采用本文叙述的光学系统会聚多模石英光纤出射的大功率YAG激光,通常能以小于0.2mm的线宽长时间连续地在工件上刻划,仔细调焦后线宽达0.1mm;手持此光笔可进行人工刻写、画及焊接电子元件等.     

实验性犬气道肉芽肿及YAG：Nd激光治疗机理的研究

随着内窥镜检查及胸部手术的广泛开展、气管切开后金属插管的较长期使用,气管支气管肉芽肿以及良恶性肿瘤等已为常见疾病。激光治疗气管、支气管疾病在临床上已证明有效,但激光对气道粘膜的作用究竟如何尚鲜见报道。本实验应用机械刺激原理,置异物于大道某一部位,造成持续性刺激而促使该部位生长出炎性肉芽肿,然后以YAG:Nd激光照射汽化之,观察治疗后局部大体及镜下病理变化,旨在为临床激光治疗气道内阻塞性病变提供理论参考。     

Effect of Post Annealing on the Microstructure and Magnetic Properties of NdFeB/α-Fe/NdFeB Thin Films

A series of nanocomposite thin films, composed of Nd2Fe14B and α-Fe, has been prepared by DC-magnetron sputtering combined ion beam sputtering onto Si (100) substrates. The effects of post annealing on the microstructure and magnetic properties of [NdFeB/α-Fe/NdFeB]-type thin films have been investigated. The X-ray diffraction (XRD) study showed that annealing of the films for 30min at temperatures 550,600,650,700℃ resulted in the appearance of diffraction peaks, characteristic for Nd2Fe14B tetragonal structure, α-Fe and Nd2O3 phases. The investigation using the Vibrating Sample Magnetometer (VSM) with a maximum applied field of 2 T indicated that with the increase of the annealing temperature, the magnetic properties of the multilayer films were improved and reached peak value at 650℃ (Hci=41.72kA·m-1, Mr/Ms=0.4, (BH)max=30.35kJ·m-3), after which the magnetic properties were decreased greatly. Along with the increase of the thickness of α-Fe layer from Tα-Fe16nm, the coercivity Hci, saturation magnetization Ms, and remanence ratio Mr/Ms all declined. As the Atomic Force Microscope (AFM) indicated, after being annealed at 650℃ for 30min, the sample was showed fine surface morphology with grain size 60nm≤dα-Fe≤80nm and 100nm≤dNdFeB≤150nm.     

Study on ancient Chinese imitated GE ware by INAA and WDXRF

Imitated GE ware was one of the most famous products of Jingdezhen porcelain field in Ming dynasty (AD 1368-1644). The exterior features of its body and glaze are very marvelous. Black foot, purple mouth and crazing glaze are the main features of imitated GE ware. Until now, the key conditions of resulting these features are not clearly identified. In order to find the critical elements for firing these features, instrumental neutron activation analysis (INAA) and wavelength-dispersive X-ray fluorescence (WDXRF) were used to determine the element abundance patterns of imitated GE ware body and glaze. The experimental data was compared with that of imitated Longquan celadon and of Longquan celadon. The analytical results indicated that Fe, Ti and Na were the critical elements. The body of imitated GE ware which contains high Fe and Ti are the basic conditions of firing its black body, black foot and purple mouth. The glaze of imitated GE ware which contains high Na is the main condition of producing its crazing glaze. Na is the critical element which enlarges the difference in expansion coefficients between the glaze and body of imitated GE ware. Furthermore, Zijin soil was added into kaolin to make the body rich in Fe and Ti. And something which was rich in Na was used to produce crazing glaze in the manufacturing process of imitated GE ware.     

LD泵浦的声光调Q腔内倍频激光器

研制成用ＬＤ泵浦的声光调Ｑ的Ｎｄ：ＹＶＯ４－ＫＴＰ腔内倍频激光器，得到了ＴＥＭ００模、频率高达１００ｋＨｚ的稳定的５３２ｕｍ绿激光脉冲系列输出，阈值泵浦功率为２７ｍＷ；在连续５７０ｍＷ的泵浦功率下，绿激光脉冲的峰值功率达１１００Ｗ，脉宽为４．６ｕｓ；输出功率稳定，在±５℃的工作温度变化下，输出功率变化小于±２％。此种器件可望得到广泛的应用。     

烧结钕铁硼永磁体的镍及镍磷合金镀层

综述了钕铁硼永磁体材料的表面电镀镍及化学镀镍磷合金的研究进展，提出了从铵铁硼材料的特殊性来选择恰当的前处理和镀覆工艺，就有获得优质的保护镀层。