多孔ZSM-5沸石负载Ni2P催化剂对苯乙炔的选择性加氢性能

以酸性多孔ZSM-5沸石(HZSM-5-M)和高比表面积的氧化硅(SiO2)为载体，采用等体积浸渍法制备了负载Ni2P催化剂(Ni2P/HZSM-5-M和Ni2P/SiO2)，对比研究了它们在苯乙炔选择性加氢反应中的催化性能。采用XRD、N2吸附-脱附、NH3-TPD、H2-TPR、SEM和TEM对载体及其负载的Ni2P催化剂进行了表征。催化剂活性结果为：当反应时间为2 h，苯乙炔在Ni2P/HZSM-5-M催化剂的转化率为98.5%，而在Ni2P/SiO2催化剂上仅为45.6%。说明Ni2P/HZSM-5-M催化剂的加氢活性显著高于Ni2P/SiO2催化剂。这是因为，与Ni2P/SiO2催化剂相比，在Ni2P/HZSM-5-M催化剂上形成了小颗粒的Ni2P活性相。同时，Ni2P/HZSM-5-M催化剂的活性具有良好的重复性。     

二维层状材料在涂层防腐中的研究进展

二维层状材料由于其独特的形貌结构、较高的比表面积、优异的物理机械性能等优势在涂层防腐中受到了广泛的关注。结合国内外最新研究，综述了近年来石墨烯、六方氮化硼、二硫化钼、水滑石及蒙脱土等二维层状材料在涂层防腐中的研究进展，并对各类二维层状材料应用于涂层防腐中的防腐效果进行了对比与总结，最后对二维层状材料在涂层防腐中的发展趋势进行了展望。     

Synthesis and characterization of thermosensitive composite microsphere latex

Monodisperse aqueous latex dispersions, prepared from mixtures of styrene, N‐isopropylacrylamide, and N,N′‐methylenebisacrylamide, were characterized. Thermosensitive composite microspheres with diameters greater than 1.0 μm, consisting of a polystyrene core and a poly(N‐isopropylacrylamide) shell, were prepared. The morphology of the composite microspheres was observed with transmission electron microscopy, and the particle size of the composite microspheres was estimated with dynamic light scattering. The thermosensitive properties of the composite microspheres were evaluated via the hydrodynamic size of the composite microspheres. The particle size of the composite microspheres decreased with increasing temperature. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 824–828, 2005     

Epoxy‐montmorillonite clay nanocomposites: Synthesis and characterization

Nanocomposites of epoxy resin with montmorillonite clay were synthesized by swelling of different proportions of the clay in a diglycidyl ether of bisphenol‐A followed by in situ polymerization with aromatic diamine as a curing agent. The montmorillonite was modified with octadecylamine and made organophilic. The organoclay was found to be intercalated easily by incorporation of the epoxy precursor and the clay galleries were simultaneously expanded. However, Na‐montmorillonite clay could not be intercalated during the mixing or through the curing process. Curing temperature was found to provide a balance between the reaction rate of the epoxy precursor and the diffusion rate of the curing agent into the clay galleries. The cure kinetics were studied by differential scanning calorimetry. The exfoliation behavior of the organoclay system was investigated by X‐ray diffraction. Thermogravimetric analysis was used to determine the thermal stability, which was correlated with the ionic exchange between the organic species and the silicate layers. The morphology of the nanocomposites was evaluated by scanning electron microscopy. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 2201–2210, 2004     

P2成型机简介及Interbus-s总线故障分析

简要介绍了P2成型机各部分的结构组成及电控系统的组成、Interbus-s总线的结构特点。分析了Interbus-s总线上出现的故障情况，经排查及改进PLC程序排除了故障。     

防腐蚀涂装系统设计

介绍了防腐蚀涂装设计的影响因素，涂料产品的相关文件以及确立防腐蚀涂装设计应考虑的基本原理和情况。     

新建电泳涂装线投产前的准备工作

介绍了新建阴极电泳涂装线在投产前必须要做的一些准备工作。     

Biocidal hydantoinylsiloxane polymers. IV. N‐halamine siloxane‐functionalized silica gel

The monomer 5,5‐dimethyl‐3‐(3′‐triethoxysilylpropyl)hydantoin and its hydrolysis product polymer poly[3‐(5,5‐dimethylhydantoinylpropyl)hydroxysiloxane] were employed to functionalize the surfaces of silica gel particles in order to produce an adhered film that becomes biocidal upon chlorination with dilute sodium hypochlorite bleach. The biocidal efficacy of the functionalized silica gel was demonstrated in a cartridge filter experiment against the bacterial pathogens Staphylococcus aureus and Escherichia coli O157:H7. Complete 6 log inactivations of the two bacterial species were observed within 30 s of contact. Moreover, upon loss of biocidal activity due to depletion of bound chlorine, the coated silica gel particles could be recharged by further exposure to dilute bleach. Potential uses of the biocidal silica gel include disinfection and odor control in water treatment facilities and recirculating baths. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 3448–3454, 2006     

超支化聚酯树脂在涂料中的应用

超支化聚合物具有高度支化的分子结构,及大量官能端基,在合成工艺上易于工业化生产。简介了超支化聚酯的特性,及其在高固低黏涂料、UV固化和粉末涂料中的应用。     

Rheological study on O−carboxymethylated chitosan/cellulose polyblends from LiCl/N,N‐dimethylacetamide solution

An O?carboxymethylated chitosan (O? CMCh) water solution (I) and N,N‐dimethylacetamide (DMAc) emulsion (II) were blended with a cellulose LiCl/DMAc solution, and corresponding polyblends (Polyblends I and II) were obtained. The rheology of the three fluids, that is, the cellulose solution and Polyblends I and II, was investigated. The cellulose solution was characterized by a power‐law fluid. When an O‐CMCh water solution or DMAc emulsion was added to the cellulose solution, the power‐law curve was preserved. The power‐law indexes (n) of all three fluids increased along with the temperature. Polyblend I displays an n close to but a little higher than that of the cellulose solution, while Polyblend II shows a much higher power index than those of the other two fluids. The values of the apparent viscosity (η_a) for all the three fluids are close and decrease along with an increase in the temperature. Adding O‐CMCh microparticles into Polyblends I and II results in a decrease in the structural viscosity index (Δη) in comparison to that of the cellulose solution, and this effect is very obvious for Polyblend I. A cellulose solution's Δη declines with the augmentation of temperature, while the Δη's of both Polyblends I and II show minimum values at about 323 K. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 1719–1725, 2003