Effect of grain size on high-temperature oxidation behavior of Cu-80Ni alloy

1　INTRODUCTIONTheoxidationofunalloyedcopperandnickelhasalreadybeenstudiedindetail.Whilethehigh tem peratureoxidationofCu Nialloys ,alsostudiedanumberoftimestodate[13] ,isanexampleofarela tivelysimpleclassofscalingofbinaryalloysbyasin gleoxidant,becausethemetalsformacontinuousse riesofsolidsolutions ,whiletheiroxides ,CuO ,Cu2 OandNiO ,exhibitsmallmutualsolubilitiesandshowsignificantdifferencesinthethermodynamicstabilityandparabolicgrowthrates .Thus ,copper richalloysformexternalscales…     

Effect of surface modification of metal hydride electrode on performance of MH/Ni batteries

A novel method was applied to the surface modification of the metal hydride(MH)electrode of MH/Ni batteries.Both sides of the electrode were plated with a thin silver film about 0.1μm thick using vacuum evaporation plating technology,and the effect of the electrode on the performance of MH/Ni batteries was examined.It is found that the surface modification can enhance the electrode conductivity and decrease the battery ohimic resistance.After surface modification,the discharge capacity at 5C(7.5A)is increased by 212 mA.h and the discharge voltage is increased by 0.11 V,the resistance of the batteries is also decreased by 32%.The batteries with modified electrode exhibit satisfactory durability.The remaining capacity of the modified batteries is 89%of the initial capacity even after 500 cycles.The inner pressure of the batteries during overcharging is lowered and the charging efficiency of the batteries is improved.     

Preparation and characterization of Ni/Co bimetallic nano-clusters

Ni/Co bimetallic nano-cluters have been prepared from the aqueous solution by reducing their corresponding metal salts under suitable conditions. The experimental conditions including the type and concentration of protective agent, feeding order and the pH of the solution that influence the average particle size have been studied in detail. Transmission electron microscopy (TEM) indicates that the shape of those bimetallic nano-cluster particles is spheroid. The alloy structure has been shown by X-ray powder diffraction (XRD). The X-ray photoelectron spectroscopic (XPS) data have confirmed that the nickel and cobalt in the bimetallic nano-clusters are in the zero-valence state.     

The AC losses measurement and analysis of superconducting NbTi CICC for HT-TU superconducting Tokamak

Superconducting TF and PF coils have been measured in SULTAN test facility. Segregated copper strands are included in four NbTi CICC and this is a technical innovation. Two AC losses measurement methods, calorimetric and electromagnetic methods, have been used in the experiments, and a broad frequency range (from 0.05 Hz to 6 Hz) is covered in sample test. The purpose of this experiment was to investigate AC losses of TF and PF CICC conductor including segregated copper and to check the design of PF and TF CICC coated with different resistive barriers (Pb-30Sn-2Sb and Ni plating on NbTi strands).     

燃气轮机叶片材料0Cr17Ni4Cu4Nb砂带磨削性能研究

理论分析了在切除过程中磨粒与材料表面的交互作用机理,进行了砂带磨削燃气轮机叶片材料0Cr17Ni4Cu4Nb的试验研究,系统分析了各磨削工艺参数对材料切除率的影响规律,该研究对生产实践具有理论指导意义.     

Ag/LaNixCo1-xO3触点材料的制备及电接触性能研究

本文运用溶胶-凝胶燃烧法合成了双钙钛矿型LaNixCo1-xO3(LNCO)纳米材料,利用粉末冶金和热挤压技术制备了相应的Ag/LNCO触点材料及元件样品。重点考察了不同Ni、Co含量对Ag/LNCO触点材料微观结构、物相组成、物理性能、力学性能及电寿命服役能力的影响,对其电弧侵蚀失效行为进行了研究,并与SnO2粉体增强Ag基触点材料进行对比。结果表明:溶胶凝胶法合成的LNCO纳米颗粒粒径为20-30 nm,经粉末冶金工艺制备的Ag/LaNi0.5Co0.5O3触点材料电学性能和电寿命都优于Ag/SnO2触点材料,其电阻率低至2.10 μΩ?cm,电寿命性能达到51287次。表明Ag/LaNi0.5Co0.5O3触点材料性能较佳,是一种可以取代Ag/CdO的新型触点材料。     

Short-Period GaMnAs/GaAs Superlattices: Optical and Magnetic Characterization

Superlattices with magnetic layers containing from 8 to 16 GaMnAs monolayers corresponding to the mixed crystal composition between 5 and 6% of Mn and from 4 to 10 GaAs monolayers were grown by the low temperature MBE technique and characterized by Raman scattering. Folded acoustic phonons were observed for all superlattices in the Raman scattering spectra. The interlayer exchange coupling, found previously by the wide-angle neutron diffraction in selected superlattices was investigated by the spin-polarized neutron reflectometry. It was always of ferromagnetic type, no trace of antiferromagnetic coupling was found.