双柱塞砂浆泵中工作机构的设计和仿真研究

本文介绍了双柱塞砂浆泵的工作原理，根据机构替代原理建立起双柱塞砂浆泵工作机构的运动分析模型，然后在MatLab环境下，详细介绍了工作凸轮曲线的设计程序，利用计算机设计程序可以方便地分析工作缸活塞以及工作凸轮机构的位移、速度、加速度，利用SIMULINK仿真工具箱进行运动学仿真，为工作机构设计提供相应的理论分析依据。     

基于ADμC834芯片热泵热水机组控制器的研制

热泵热水机组是一种新型热水和供暖产品,它可以从空气、水等环境中吸取能量,热效率高,被公为是传统锅炉、电热水器及燃油(气)热水机组的更新换代环保型产品。详细阐述了以ADμC834芯片为核心的热泵热水机组控制器软硬件系统设计。论述了多路温度数据与压力数据采集、液晶显示等模块的硬件组成及各个模块的工作原理。控制器的软件系统采用前后台架构,用QuickStart平台开发完成。其人机界面系统由按键阵列和TG2401286V2型液晶显示屏组成。     

抽油机球铁齿轮的化学成分及生产工艺

为提高抽油机减速器齿轮铸件的机械性能，提出以Sn代替Mo作为合金元素，并通过试验确定了合理的Si、Cu、Sn的加入量。指出Si加入量应控制在1．9％－2．1％范围内，同时加入0．36％～0．9％的Cu和0．025％～0．07％的Sn，可保证球铁的强度和延伸率都满足QT700－2的要求。鉴于试件与实际铸件的表面硬度有一定的差值，为提高铸件表面硬度，进行了余热正火试验，并给出了铸件在铸型内的时间－冷却温度曲线。最后根据球铁化学成分的选择结果，进行了齿轮生产试验。     

Calculation methods for comparing the performance of pure and mixed working fluids in heat pump applications

Three methods for comparing cycle performance of working fluids, pure as well as non-azeotropic mixtures, are investigated for two applications and for two mixture pairs, HCFC22-CFC114 and HCFC22-HCFC142b, and their pure components. The methods differ in the way of calculating the heat exchange processes. They assume, respectively, equal minimum approach temperatures, equal mean temperature differences and equal heat transfer areas. Changes of coefficient of performance (COP) with composition are explained for all methods. It is shown that transport properties must be taken into account when making rigorous comparisons between working fluids. To predict the relations between fluids with high accuracy, one must use the method with equal heat transfer areas. By the method with equal mean temperature differences, the COP can be estimated with the same accuracy for mixtures as for pure fluids, and can be used for rough estimations of the COP level with different fluids. The method of equal minimum approach temperatures should be avoided for non-azeotropic mixtures.     

NUMERICAL STUDY ON QUASI- STEADY FLOW OF NONNEWTONIAN FLUID IN SUCK-ROD PUMP

This paper presents a numerical method for simulation of the flow and thecalculated results of the quasi-steady axisymmetrical flow field and pressure distribution on valveball with power-law model for Non-Newtonian fluid in suck-rod pump.We believe the methodcan provide a foundation for further research and improvement of the design of suck-rod pump.     

大泵站超驼峰水位运行压缩空气断流系统的设计方法

阐述了压缩空气断流的原理，提出了压缩空气断流装置的一般构成和设计方法，首次应用气体喷射器作为压缩空气减压增量变换器，不但及时地增加了补气量，防止断流后流道压力的下降，而且大大减小了储气罐容积，使该项技术得以满足工程实际的要求，为同类泵站的技术改造     

锥形阀压电薄膜泵的初步研究

提出一种适应高频工作状态的压电薄膜泵结构，实步分析了所采用的锥形阀的工作原理与作用，设计了试验泵结构，加工了样机，通过试验证明了锥形阀的有效性，为进一步的研究打下了基础。     

Potential of ground heat source systems

This paper presents a historical background of ground source heat pump technology, followed by a review of its current shortcomings. Based on these observations the author assesses the R&D needs and recommendations for future research.     

高炉冲渣水在采暖工程中的应用

随着我国经济的迅速发展,能源消耗不断增加,节约能源、降低能源消耗势在必行,余热利用是节约能源的一个重要环节,冶金行业高炉冲渣水作为采暖热媒可以节约大量能源。     

用瞬态频率波动法诊断齿轮故障

利用瞬态频率波动法实现频率调制信号的解调，提取齿轮的局部裂纹信息，并通过黄河ＴＮ２５２型汽车变速器疲劳试验的信号分析来验证。