碳羟磷灰石(CHAP)吸附废水中锰离子的动力学研究

主要研究了碳羟磷灰石(CHAP)对二价锰离子的吸附性能。从pH、吸附时间及初始Mn2+浓度3方面对吸附能力的影响进行吸附试验。试验结果表明:在常温常压,CHAP吸附Mn2+的最佳pH值为6,最佳吸附时间为60 min,吸附量达到22.44mg/g。CHAP对Mn2+的吸附过程符合准二级反应动力学模型。CHAP吸附Mn2+的能力随着废水中Mn2+浓度增加而增加,最大的吸附量达24.29mg/g,CHAP对Mn2+的吸附符合Langmuir吸附等温式。     

Equilibrium adsorption studies on removal of diclofenac sodium from aqueous solution using sawdust–polyaniline (SD–PAn) composites

In this work, equilibrium adsorption studies were carried out for the removal of antiinflamatory drug diclofenac sodium (DS) from aqueous solutions using sawdust–polyaniline(SD-PAn) composite as a potential sorbent at 20, 30, and 40°C. The composite sorbent was characterized by FTIR and SEM analysis. The particles exhibited porous and rough surface. The equilibrium uptake data was interpreted by the Langmuir, the Freundlic, the Temkin, and the Dubinin–Redushkevich (D -R) isotherm models. The maximum adsorption capacity was found to decrease with increase in temperature, thus indicating exothermic nature of the adsorption process. The thermodynamic parameters were evaluated using Langmuir, Flory–Huggins, Frumkin, and modified-Frumkin models. The negative values of ΔG_ads⁰ and ΔH⁰ indicated spontaneous and exothermic nature of the adsorption process, respectively. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci 125:1382–1390, 2012     

Quantitative Determination of Plasticizers in Polymeric Mixtures by GPC

Abstract

Organic plasticizers were added to plastics to improve flow and reduce brittleness by lowering the glass transition temperature. The amount of plasticizer added to the base resin determined its efficiency in bringing about these desired changes in properties. Analytical gel permeation chrornatography (GPC) was utilized to quantitatively determine the amount of organic plasticizers in poly(styrene) mixtures. The internal standard method was applied to the determination of triethyleneglycol-dibenzoate and tricyclohexylcitrate over the concentration range of 5.0 to 30.0 wt% in poly(styrene). Linear calibration curves and excellent precision between measurements was demonstrated over the concentration range investigated. GPC analysis has the advantage over spectrophoto-metric techniques in its ability to separate low molecular weight plasticizers: from higher molecular weight resins. In addition to the potential of making quantitative measurements from the detected peak, the associated material can be separated from the polymer, collected, and separately analyzed by UV or IR techniques.     

Phosphorus Recovery from Urban Wastewater Treatment Plant Sludge Liquor by Ion Exchange

In this study phosphorus recovery from sludge liquor by ion exchange process was investigated. The efficiency of a commercially available anionic iron oxide resin was evaluated in batch and packed column tests using synthetic phosphorus solution and actual sludge liquor, taken from of an urban wastewater treatment plant (UWWTP). When phosphorus recovery from sludge liquor was investigated, experimental data fitted quite well Generalized Langmuir–Freundlich isotherm (R² = 0.92 for the new resin and R² = 0.96 for the regenerated resin); the maximum adsorption capacity being 14.2 and 14.4 mg P/g, respectively. The saturation of adsorption sites was not achieved also after 11.5 hours and 120 bed volumes, in column tests. When the reactor was operated with sludge liquor and the new resin, the saturation of packed bed was achieved after approximately 175 min and 31 bed volumes. The recovery efficiency of phosphorus during the regeneration step was as high as 95% (less than 13 bed volumes). According to the results achieved and the increasing cost of phosphorus production from conventional resources (yearly incremental cost 0.012 €/(kg · y)), its recovery from UWWTPs sludge liquor by the ion exchange process is expected to be really useful and beneficial for the following 10–15 years.     

Evaluation of Red Marine Alga Kappaphycus alvarezii as Biosorbent for Methylene Blue: Isotherm,Kinetic, and Mechanism Studies

In this work, non-living red seaweed (Kappaphycus alvarezii) biomass was investigated as a new biosorbent of methylene blue from aqueous solution. The effect of operational parameters such as equilibrium pH, agitation time, initial dye concentrations, and biosorbent dosage on the biosorption capacity of Kappaphycus alvarezii was studied. The equilibrium solution pH was found to profoundly affect methylene blue sorption capacity of Kappaphycus alvarezii with pH 8 found to be optimum. Evidence from Fourier-transform infrared spectroscopy and scanning electron microscopy pictures confirmed the dye biosorption mechanism as electrostatic interaction between the negatively charged seaweed surface and positively charged methylene blue. Biosorption isotherms indicated that Kappaphycus alvarezii exhibited methylene blue uptake of 74.4 mg/g, according to the Langmuir model. The equilibrium isotherm data were evaluated using the Freundlich, Langmuir, Redlich-Peterson, and Toth models. Kinetic studies revealed that methylene blue uptake was fast with 97% or more of the uptake occurred within 60 min of contact time. The pseudo first and second order models were applied to describe kinetic data, of which the pseudo-first order described experimental data better with high correlation coefficient and low percentage of error values.     

Removal Characteristics of Cd(II), Cu(II), Pb(II), and Zn(II) by Natural Mongolian Zeolite through Batch and Column Experiments

The removal characteristics of Cd(II), Cu(II), Pb(II), and Zn(II) from model aqueous solutions by 5 natural Mongolian zeolites were investigated. The adsorption of metals on zeolites reached a plateau value within 6 h. The adsorption kinetic data were fitted with adsorption kinetic models. The equilibrium adsorption capacity of the zeolites was measured and fitted using Langmuir and Freundlich isotherm models. The order of adsorption capacity of zeolite was Pb(II) > Zn(II) > Cu(II) > Cd(II). The maximum adsorption capacity of natural zeolite depends on its cation exchange capacity and pH. The leaching properties of metals were simulated using four leaching solutions. The results show that natural zeolite can be used as an adsorbent for metal ions from aqueous solutions or as a stabilizer for metal-contaminated soils.     

Methylene Blue Adsorption on Natural and Modified Clays

Toxic methylene blue dye is removed from water by accumulating it on the surface of clay minerals. Clay adsorbents are obtained from kaolinite, montmorillonite, and their acid activated forms. The adsorption experiments are carried out in a batch process in environments of different pH, initial dye concentration, amount of clay, interaction time, and temperature. Adsorption of dye is best described by second order kinetics. In the temperature range of 303 to 333 K, the Langmuir monolayer capacity for three kaolinite species increased from 45.5 to 56.5 mg g^?1, 45.9 to 57.8 mg g^?1, 46.3 to 58.8 mg g^?1, and for three montmorillonites species from 163.9 to 181.8 mg g^?1, 166.7 to 188.8 mg g^?1, and 172.4 to 192.3 mg g^?1. The interaction is an endothermic process driven by entropy increase and spontaneous adsorptive accumulation is ensured by favorable Gibbs energy decrease. It is found that acid activation enhances the adsorption capacity of kaolinite and montmorillonite.     

Investigating the Synergistic Effect of D2EHPA and Cyanex 302 on Zinc and Manganese Separation

The synergistic effect of Cyanex 302 on the extraction of zinc and manganese with D2EHPA in sulfate media was investigated. Experiments were carried out in the pH range of 1.0–5.0, temperature of 23, 40, and 60°C with sole D2EHPA and Cyanex 302 as extractant and D2EHPA to Cyanex 302 ratios of 1:3, 1:1, and 3:1. The experimental results showed that the co-extraction of zinc and manganese increased with increasing equilibrium pH and temperature. Increasing the D2EHPA to Cyanex 302 ratio in the organic phase, caused a left shifting of the extraction isotherm of zinc and a right shifting of the extraction isotherm of manganese. Thus, a better separation of zinc over manganese was achieved. At low pHs, the separation factor is low when pure D2EHPA is used as an extractant; however, using Cyanex 302 as a synergist, the separation factor increases and results in a better separation of zinc from manganese. Stoichiometric coefficient of zinc for single D2EHPA and Cyanex 302 and their mixture was calculated to be close to 6.