Synthesis,Characterization and Luminescent Properties of Complexes of Rare Earth Nitrates with Tris{2-[N-(pyridine-methanoyl)amino]ethyl} amine

Duringthelastdecade ,thedesignandsynthesisoftripodalligandsandtheirmetalcomplexeshaveattractedconsiderableattentionduetotheirpotentialusesaslumi nescentprobesinmedicineandbiochemistry[1～ 7] ,ascatalysts[8] andelectrochemicalmaterials[9] .However ,thecomplexesofrareearthmetalwithtripodalligandshavefewreported[10 ] .Asanextensionofourstudiesoncomplexesofmetalwithtripodalligands ,anewtripodalligand (tris { 2 [N (pyridine methanoyl)amino]ethyl}amine ,L)anditscomplexeswithrareearthnitratesweresyn…     

Accumulation and Mixing of Oils in Jinghu Sag of Subei Basin： Constraints from Thermal Maturity Parameters

Oils in Jinghu sag are abundant with high content of polar compounds and have a low ratio of saturate to aromatic hydrocarbons and a high ratio of resin to asphaltene. The gross composition of oils in the Jinghu sag suggests typical immature to low mature characteristics. Some compounds with low thermal stability were identified. Light hydrocarbons, a carbon preference index, an odd even index, n-alkane and hopane maturity parameters show mature features and little differences in the maturity level among oils. Sterane isomerization parameters indicate an immature to low mature status of oil. Transfer of the sedimentary center during sedimentation has led to different thermal histories among subsags and thus generated oils with different maturities. On the basis of source analyses, four migration and accumulation patterns with different maturity can be classified. Combined with available information on mergers of source, reservoir and long distance oil lateral migration, mixing conditions were present in the Jinghu sag. Experimental results indicate that maturity variations are caused by mixtures of hydrocarbons with different maturity.     

Enrichment of slightly concentrated tritiated water by electrolysis using a palladium cathode coated on ionic solid polymer membrane—Design and results

In nuclear installations, tritiated water is generally produced in the process of detritiation of air circulating in the glove boxes. The goal of this work concerns enrichment of this tritiated water at low concentration by electrolysis. The choice of this electrolyzer was dictated by the passivity of selected materials to the radiolysis in low-level tritiated water and the selectivity of the method avoiding further elimination of tritiated water and moisture before release in environment. According to the results, it is feasible to treat non-negligible volume of low-level tritiated water using a cathodic palladium membrane coated on an ionic solid polymer membrane. Presence of a palladium black deposit on the palladium membrane improves effectiveness. Enrichment in tritiated water depends on the isotopic separation factor, thereby the current and the permeability values.     

石膏制品防水防潮剂的研制与开发

本文提出采用高分子有机材料配合，生产石膏制品防水防潮剂的生产方法和工艺。该剂还可以应用到氧化镁系列板材，同时提出开发珠光或彩色防水防潮剂，能达到满足的装饰效果，值提开发推广。     

乙烯装置制冷系统的用能分析

通过对制冷压缩机功耗的模拟和对实际运行数据的分析,比较了乙烯装置中的复迭多级制冷系统和混合冷剂制冷系统的用能状况,分析了混合冷剂制冷的优点和不足。采用AspenPlus10.2软件模拟的结果表明,采用混合冷剂制冷技术的丙烯-混合冷剂复迭制冷系统比传统的丙烯-乙烯复迭制冷系统节省功耗4.3GJ/h,制冷压缩机损系数则从47.6%减小到43.3%,而系统效率由25.0%提高到26.6%。虽混合冷剂在换热过程中出现的气液两相流,会在一定程度上抵消其在热力学效率上的优势,但混合制冷技术用于乙烯装置仍可降低能耗、提高热力学效率。     

后工业时代米兰单功能城区更新

在物化的形式上,解释米兰城市发展历史上的单功能城区的改造意义,并由此分析单功能城区更新的经验:单功能城区向混合居住模式的更新是发展方向;城区的功能重新定义对城区发展有重要意义;以新的建设为基础,发展城区自身的特色,做到城市在更新和特色之间的协调。     

高灰度级TFT-LCD显示系统的实现

提出了一种以FPGA为核心控制器的高灰度级TFT-LCD显示系统的设计方案。该系统采用幅值-帧速率控制调制-空间混合灰度调制方法,首先将10 bit的R、G、B信号分割成高8 bit数据和低2 bit数据,低2 bit数据经过空间处理后平均分到4个相邻的8 bit数据上,然后把这8 bit数据继续分割成高6 bit数据和低2 bit数据,其中高6 bit数据用于幅值调制,低2 bit数据用于帧速率控制调制,从而实现1 024个灰度等级显示。试验结果表明,该系统具有良好的显示效果和较高的显示灰度等级。     

Augmented Lyapunov functional approach for stability of neutral systems with mixed delays

This paper is concerned with the neutral‐delay‐dependent and discrete‐delay‐dependent stability for uncertain neutral systems with mixed delays and norm‐bounded uncertainties. Through constructing a new augmented Lyapunov‐Krasovskii functional and proving its positive definiteness, introducing some slack matrices and using integral inequality, the improved delay‐dependent stability criteria are derived in terms of linear matrix inequalities. Numerical examples are given to illustrate the significant improvement on the conservatism of the delay bound over some existing results. Copyright © 2010 John Wiley and Sons Asia Pte Ltd and Chinese Automatic Control Society