Interaction bounds in multivariable control systems

Time-domain limitations due to right half-plane zeros and poles in linear multivariable control systems are studied. Lower bounds on the interaction are derived. They show not only how the location of zeros and poles are critical in multivariable systems, but also how the zero and pole directions influence the performance. The results are illustrated on the quadruple-tank process, which is a new multivariable laboratory process.     

Hybrid of multi-signal processing methods for detection of small objects in containers filled with beverages using ultrasound

Ultrasound backscattered signals for object detection could be too weak to be perceived when superposed to strong reflection signals, and could also be complicated either in time or frequency domain. These peculiarities raise a challenge for signal processing methods. In this paper four signal processing methods were studied to detect objects in containers. Root mean squares (RMS) method was better in object detection but needed to combine other methods to increase detection success rate. Variance, center frequency pressure ratio (CFPR) and backscattered amplitude integral (BAI) methods have similar overall detection ratings. The optimal signal size, to increase the detection ability, corresponded approximately to the length of reverberation signals before it was dissipated.     

线缆护套材料在我国西部环境中的试验研究

本文通过对线缆外护套材料在我国西部地区严酷环境试验站中土壤和大气1～5年的试验结果分析，总结了塑料护套材料的耐蚀性能。为线缆护套的防护设计、合理选材及制定标准提供科学依据。     

Performance analysis of IEEE 802.11 ad hoc networks in the presence of exposed terminals

The paper evaluates the performance effects of exposed terminals in IEEE 802.11 ad hoc networks in finite load conditions. It derives analytical models for the estimation of channel utilization and media access delay for IEEE 802.11 ad hoc networks in finite load conditions with and without exposed terminals. The simulation results show that the analytical estimated channel utilization and media access delay metrics are fairly accurate.     

Integrated development of CFRP structures for a topless high performance vehicle

When modern saloon cars are re-engineered as convertibles (or roadsters) it is typical for them to lose 50% or more of the body’s torsional rigidity. Consequently the vehicles rarely handle quite as crisply, nor do they ride as well as the coupes from which they derived. This paper highlights the fundamental contributions of advanced composites in achieving the desired value of handling of the Murcièlago Roadster without penalizing the overall weight of the vehicle. To compensate for the absence of the roof structure, the vehicle was strongly redesigned by introducing new structural members and reinforcing existing critical components. A new all-carbon/epoxy composite sub-frame, which spans the entire engine bay, is comprised of elliptical tubular members, and it is the first of its kind in a production vehicle. Engineering of the sub-frame, from preliminary design to manufacturing decisions, is the focus of this paper, and is achieved through a Building Block approach that sets the program within the Integrated Product Development (IPD) strategy that the Advanced Composites Division of Automobili Lamborghini S.p.A. employs for its technology demonstrators. The strategy consists in a concurrent analytical and experimental development of the product, from the initial conceptual design and coupon testing, through the stages of element and subcomponent engineering, to final component manufacturing.     

超声-回弹-钻芯综合法测强初探

基于超声-回弹综合法和钻芯法检测结构混凝土强度的原理及优缺点分析，对采用超声-回弹综合法和钻芯取样法联合测强的方法：超声-回弹-钻芯综合法进行了理论研究，并结合统计理论给出了其中相关参数的确定方法。工程实例证明，该测试方法费用合理、损伤较小，且结果可靠、精度高、可在桥梁、基础等工程中推广应用。     

稳定同位素井间示踪技术在深层块状稠油油藏水驱特征研究的应用

经对冷43块深层块状普通稠油水驱注水5个试验井组开展的稳定同位素示踪测试，利用中子活化技术分析样品，采用先进的示踪剂定量分析与流动模拟相互结合的方法，以示踪数值模拟为手段，评价了油井连通、油层平面及纵向上的非均质性、隔层的封隔性等因素对水驱控制程度及动用状况的影响，通过优化注水推进方向及速度，强化动态调整措施，提高了稳产基础。     

油管漏磁探伤工艺与应用

简要介绍了漏磁探伤的基本原理及工艺流程与设备仪器，并对油管的常见损伤缺陷进行了分析。     

Behaviour of ±45° glass/epoxy filament wound composite tubes under quasi-static equal biaxial tension–compression loading: experimental results

The primary aim of this paper is to present results describing in detail the behaviour of ±45° E-glass/MY750 (GRP) tubes, of various wall thicknesses, subjected to equal biaxial tension–compression loading, generated under combined internal pressure and axial compression. The role played by the non-linear lamina shear has also been assessed by comparing various shear stress–strain curves for embedded laminae (extracted from tests on ±45° tubes subjected to circumferential: axial stress ratios SR=1:0, 1:−1 and 2.3:−1) with that of an ‘isolated’ lamina (measured from torsion of 90° tubes). Extracted shear failure strains, for embedded laminae, were more than four fold larger than those measured at ultimate failure for an ‘isolated’ lamina. Soft characteristics were observed in the embedded lamina and these were believed to be due to interaction between early matrix damage initiation (and propagation) and shear. Factors affecting the behaviour of the tubes, such as bulging, scissoring, thermal stresses and stress variation through the thickness are discussed.     

链条锅炉的节能改造

本文针对株洲硬质合金厂SHL20—13—AII型20t蒸汽链条锅炉存在的问题，进行了节能改造，取得了显著的成效。