卧螺离心机变频调速PLC控制系统设计

针对传统的卧螺离心机控制系统存在稳定性差、工作效率低的问题,设计了一种卧螺离心机变频调速PLC控制系统;详细介绍了该系统中共直流母线变频调速系统、副电机随动方案及负载率调整方法、PLC控制系统、组态界面的设计。实际应用表明,该系统运行稳定,提高了离心机的性能。     

可编程脉冲产生器的设计及应用

文中针对脉冲产生器的市场供应与实际应用情况,给出了一种以单片机为CPU核心的可编程脉冲产生器的设计思路,阐述了完成该产生器的硬件结构和软件设计方法,并给出相应的硬件电路和软件设计流程;为了验证设计的合理性,将其应用于某测控系统的步进电机控制器中,并进行实验测试,结果表明该设计具有低成本、高可靠性等特点,特别是其脉冲宽度与周期可编程预置,不仅增加了设备的使用灵活性,而且扩大了应用范围,可推广应用于多种功能的测控系统中。     

基于PR控制器的直接转矩控制策略研究

针对传统直接转矩控制中采用开关表控制造成转矩和电流脉动,以及传统调节器不能实现对交流输入信号的无静差控制等问题,基于电机空间电压矢量的转矩和磁链2个分量解耦的控制方式和PR控制器能够在静止坐标系下实现对交流输入信号的无静差控制,将PR控制器用于永磁同步电机的直接转矩控制中,并由此设计出磁链和转矩的双PR控制器。同时,在定子磁链的观测中,采用基于转子位置和定子电流的新型定子磁链估计方法。试验结果证明,将PR控制器对交流输入信号的无静差跟踪特性应用于基于空间电压矢量调制的直接转矩控制中,系统能获得优良的动态和静态响应,取得了显著的应用成效,由此验证了所提方法的正确性和可行性。     

旋转固体火箭发动机统一流场计算

为了进一步研究旋转对固体火箭发动机工作的影响,采用RSM湍流模型对内孔燃烧、内孔与端面同时燃烧管状装药旋转固体火箭发动机统一流场进行了仿真。采用UDF编程给出质量入口边界,获得了旋转条件下发动机内流场结构参数特点,并给予理论说明。计算结果表明,内孔燃烧装药发动机切向速度流场类似于典型的Rankine涡,端面和内孔同时燃烧装药发动机切向速度流场呈现出Rankine涡和由端面燃烧引起的强迫涡的复杂组合涡;在发动机前封头和喷管喉部涡核切向速度峰值非常大,使燃烧室前封头和喷管喉部工作环境显著恶化;旋转使发动机燃烧室压力沿径向逐渐增大,强迫涡附近的压力梯度远大于推进剂表面的压力梯度。     

基于DSP嵌入式技术的无刷直流电动机智能控制系统的研究

本文以TI公司的数字信号处理器TMS320F2812作为核心控制芯片,设计出了一款低成本具有足够功能的无刷直流电动机的调速控制系统实验平台。详细介绍了该控制系统的软硬件结构及控制策略。通过对该控制系统实验结果的分析,表明该系统的动态性能和稳态性能好,抗干扰能力强的特点,且在该实验平台上可进行一些先进控制算法的研究。     

Magnetic and mössbauer studies on ductile Fe-Cr-Co permanent magnet alloys

Iron-chromium-cobalt alloys possess attractive magnetic properties combined with good formability and hence are identified as technologically important magnetic materials. Alloys with compositions Fe-28·9 Cr-15·6 Co and Fe-28·4 Cr-20·1Co (weight percent) have been studied. Heat-treatment parameters during thermomagnetic treatment viz temperature, time and external magnetic field were optimized with reference to magnetic properties. The fully treated anisotropic alloys develop remanence=11·5–12·0 kilo Gauss, coercivity=600–650 Oersted and energy product=4–4·5 million Gauss Oersted. Electron microscopic and Mössbauer spectroscopic techniques were used to identify the original and transformed phases. During the various stages of the development of the alloy, the changes in mechanical hardness were correlated with magnetic hardness.     

含储能型虚拟同步发电机的直驱风机并网系统自适应协调阻尼控制策略

储能型虚拟同步发电机(VSG)的灵活控制特性能够为风电并网系统提供有效的频率和电压支撑,然而系统振荡特性会受到一定程度的影响,同时风电时变出力特性导致的运行点变化也将使得定参数阻尼控制表现出适应性不足的问题.为此,提出了适应风电出力时变特性的自适应协调阻尼控制策略.首先,在风电并网系统状态空间模型的基础上推导线性变参数模型,以直驱风机的有功功率为调度变量,根据稳定域确定运行空间范围;然后,利用间隙度量对运行空间进行划分,确定各子运行空间的典型运行点并将其作为多胞形顶点,建立调度增益与系统运行工况以及控制器的映射关系;最后,针对不同频率振荡模式协调设计自适应控制器.测试系统的仿真结果表明,所设计的自适应协调阻尼控制器不仅能够同时阻尼含储能型VSG并网系统中的次同步振荡和低频振荡,也能在风电出力大范围时变工况下保持良好的阻尼水平.     

Improvement of coercivity and thermal stability of Nd-Fe-B sintered magnets by intergranular addition of Tb80Fe20 alloy

To improve the coercivity and temperature stability of Nd-Fe-B sintered magnets for high-temperature applications, the eutectic Tb₈₀Fe₂₀ (wt%) alloy powders were added into the Nd-Fe-B sintered magnets by intergranular method to enhance the coercivity (H_cj) and thermal stability. The microstructure, magnetic properties and thermal stability of the Nd-Fe-B magnets with different Tb₈₀Fe₂₀ contents were studied. The experimental results demonstrate that the coercivity (H_cj) of the sintered Nd-Fe-B magnet is significantly enhanced from 14.12 to 27.78 kOe, and the remanence (B_r) decreases not obviously by introducing 4 wt% Tb₈₀Fe₂₀ alloy. Meanwhile, the reversible temperature coefficients of coercivity (β) and remanence (α) of the Nd-Fe-B magnets are increased from ?0.5634%/℃ to ?0.4506%/℃ and ?0.1276%/℃ to ?0.1199%/℃ at 20–170 ℃, respectively. The Curie temperature (T_C) of the Nd-Fe-B magnet is slightly enhanced with the increase of Tb₈₀Fe₂₀ content. Moreover, the irreversible flux magnetic loss (h_irr) is obviously reduced as Tb₈₀Fe₂₀ addition increases. Further analysis of the microstructure reveals that a modified microstructure, i.e. clear and continuous RE-rich grain boundary layer, is acquired in the sintered magnets by introducing Tb₈₀Fe₂₀ alloy. The associated mechanisms on improved coercivity and thermal stability were comprehensively researched.     

耐腐蚀摩托艇ADC12-0.5La铝合金微观组织及制备

为改善ADC12铝合金的耐腐蚀性能,通过超声熔铸法制备ADC12-0.5La铝合金,并利用光学显微镜、扫描电镜、能谱分析仪、硬度计、浸泡腐蚀试验和电化学工作站研究了T6热处理和稀土La改性对ADC12铝合金的微观组织、硬度和耐腐蚀性能的影响。结果表明,T6态ADC12-0.5La铝合金微观组织明显细化,α-Al尺寸减小,形貌变圆整,共晶Si相和AlFeMnSi相细化为短棒状。相比于ADC12铝合金,T6态ADC12-0.5La铝合金硬度达到117.7HV,提高了26.8%,腐蚀电流密度降低了10.7%,腐蚀电位上升了64.4%,腐蚀速率降低了54.4%,腐蚀表面平坦且光滑,表现为较轻微的晶间腐蚀。T6态ADC12-0.5La铝合金提高了腐蚀电位,Al-La-Cu稀土相阻碍了电子移动,铝合金的耐腐蚀性能得到大幅度提高。     

Nanocrystalline Nd2Fe14B／α—Fe permanent magnet

Nd8.5Fe75Co5Cu1Zr3Nb1B6.5bonded magnet was prepared by melt-spinning(vs=18m/s)and subsequent heat treatment(670℃，4min).Excellent magnetic properties of the bonded magnet were achieved:Br=0.68T,iHc=620.3kA/m,(BH)max=74kJ/m^3.The addition of Cu and Zr elements shows to be advantageous in improving an intrinsic coercivity and squareness of hysteresis loop,as well as energy product.In has a remarkable remanence enhancement and the isotropic saturation remanence ratio Mr/Ms is 0.83.