有限长矩形压力容器的应力分析法

对有限长承受内压的矩形压力容器，本文提出了同时考虑矩形容器６个面相互作用的分析计算方法。用所编制的程序计算了一个实际的矩形容器，得到了满意的结果。     

A unified theory on solid-liquid separation: Filtration, expression, sedimentation, filtration by centrifugal force, and cross flow filtration

Based upon a new conception that the solid compressive pressure on a cake surface is not null, almost of all solid-liquid separation operations have been re-examined. For cake filtration, the phenomenon caused by the solid compressive pressure on a cake surface is discussed for thin cake. New expression and hindered sed-imentation theories are developed by above new conception using Darcy’s equation. Application of the new conception to centrifugal filtration and tangential filtration is also discussed. Above results lead to the conclusion that cake filtration, expression, hindered sedimentation, centrifugal filtration and tangential filtration can be described with a unified theory, and the main difference between the operations is only the boundary condition of cake.     

超磁致伸缩作动器的率相关Hammerstein模型与H∞鲁棒跟踪控制

利用Hammerstein模型对超磁致伸缩作动器（Giant magnetostrictive actuators,GMA）的率相关迟滞非线性进行建模,分别以改进的 Prandtl-Ishlinskii（Modified Prandtl-Ishlinskii）模型和外因输入自回归模型（Autoregressive model with exogenous input,ARX）代表Hammerstein模型中的静态非线性部分和线性动态部分,并给出了模型的辨识方法. 此模型能在1～100Hz频率范围内较好地描述GMA的率相关迟滞非线性. 提出了带有逆补偿器和H∞鲁棒控制器的二自由度跟踪控制策略,实时跟踪控制实验结果证明了所提策略的有效性.     

Experimental and theoretical study on H2/CO2 separation by a five-step one-column psa process

An experimental and theoretical study is performed for bulk separation of H₂/CO₂ mixture (70/30 volume %) by PSA process with zeolite 5A, a process widely used commercially in conjunction with the catalytic steam reforming of natural gas or naphtha. For the optimized adsorption conditions of PSA, the characteristics of adsorption/desorption characteristics have been studied through breakthrough and desorption experiments under various conditions. The purge-to-feed ratio is important to the H₂ product purity only at a long adsorption step time. H₂ could be concentrated from 70% in the feed to 99.99% at H₂ recovery of 67.5%. The results of all five steps in PSA are successfully predicted by the LDF model considering an energy balance and nonlinear isotherm. For the model, the effective diffusivities (D,) are obtained separately from the uptake curves of H₂ and CO₂. The Langmuir-Freundlich isotherm is used to correlate the experimental equilibrium data and is very well fitted to the results.     

勃劳特换热器的性能

勃劳特换热器的性能周绪美，陈建铭，张鹏远，冯元鼎，丁华（北京化工大学化学工程系）关键词勃劳特换热器；压降１引言在生产过程中，气体与气体之间进行热量交换的换热器，在性能评比时，应该用两项指标来衡量。其一是单位产品所需传热面积要小，其二是单位压降的传热膜...     

邻二甲苯泵用机械密封的失效分析

针对国产化过程中，邻二甲苯泵用机械密封工作时产生的故障，进行了失效分析。为邻二甲苯泵用机械密封的改造提供了依据。     

压电作动器的动态迟滞建模与H∞鲁棒控制

压电作动器具有率相关动态迟滞非线性特性,给传统建模和控制技术提出了挑战.本文针对压电作动器,提出了一种基于Bouc-Wen的Hammerstein率相关迟滞非线性模型,其中Bouc-Wen模型和线性动态模块分别用于描述系统的静态迟滞非线性特性和率相关特性.同时,构造了一个基于Bouc-Wen模型的迟滞补偿器,将迟滞补偿器与被控对象串联使系统线性化;并建立了不确定性系统模型,提出了一种H∞鲁棒跟踪控制方案,可以实现给定频率范围内单频率和复合频率参考信号的良好跟踪.实验结果表明,所建动态模型具有良好的泛化能力,跟踪控制相对误差小于8%,证明了所提出方法的有效性.     

结合误差变换的Bouc-Wen迟滞非线性系统反步控制器设计

针对智能材料执行器中非平滑、多映射的迟滞非线性,采用Bouc-Wen模型描述迟滞,并提出了一种基于误差变换的反步控制器设计方案.首先利用Bouc-Wen模型中的变量特性,通过预设性能函数,将误差约束在预设范围内.然后通过误差变换,将一个对输出误差存在约束的跟踪问题转化为一个无约束的镇定问题.最后利用反步控制法设计迟滞系统的控制器,该控制方法保证期望的跟踪精度,并能将误差限定在设定范围内且满足预设性能,提高了系统的暂态和稳态性能.仿真结果表明设计方法的有效性.     

Solid circulation characteristics in an internally circulating fluidized bed with orifice-type draft tube

Effects of superficial gas velocities to a draft tube, to an annulus section and particle size on the solid circulation rate (G,) have been determined in an internally circulating fluidized bed (0.28 m I.D. × 2m high) with an orifice type draft tube. The solid circulation rate from the draft tube to an annulus section increases with increasing gas velocities to the draft tube(U _d ) and annulus section (U_a) and consequent increase in pressure drop across the orifice (ΔP_or). However, the values ofG _s decrease by 7–21% with increasing particle size from 86 to 288 μm. The pressure drop across the orifice increases with increasingU _d andU _a . However, ΔP_or decreases by 5–23% with increasing particle size. To predictG _s in an internally circulating fluidized bed, a correlation is proposed as a function of ΔP_or This paper is dedicated to Professor Dong Sup Doh on the occasion of his retirement Korea University.     

Characterization of pressure signals in a bubble column by wavelet packet transform

All experiments of pressure fluctuations were carried out in a bubble column with a moderately large column of 0.376 m ID. The recently developed technique of wavelet packet transform based on localized wavelet functions is applicable to analysis of the fluctuating signals. The time series of pressure fluctuation signals have been analyzed by means of wavelet packet transform components, decomposition through best basis algorithm and timefrequency representation. By resorting to this technique, the objects in bubbly flow regime have fine scales and frequencies than ones in churn-turbulent flow regime. Thus, this wavelet packet transform method enables us to obtain the frequency content of local complex flow behaviors in a bubble column.