无间隙原子钢的微观结构特征和塑性应变比

采用Ｘ射线衍射的ＯＤＦ和ＬＰ分析技术，ＳＥＭ电子通道花样和蚀坑技术观测，研究了超深冲无间隙原子钢板的微观结构特征。结果表明：控制化学成分、保证基体纯净、优选工艺参数，促进强的γ－〈１１１〉∥Ｎ．Ｄ纤维织构的形成是获得优异成型性的关键。用ＣＭＴＰ方法，由ＯＤＦ织构数据从理论计算了塑性应变比（ｒ），表明ｒｍ值高达３．１８。文中讨论了再结晶织构形成机制。     

90°分束偏光镜光强分束比研究

给出了90°分束偏光镜的e,o光光强分束比的计算公式,以及光强分束比随光波长的变化曲线;在6328Å测得的光强分束比与计算值是一致的。     

In-chain functionalization by alternating anionic copolymerization of styrene and 1-(4-dimethylaminophenyl)-1-phenylethylene

Anionic copolymerizations of styrene (M₁) with excess 1-(4-dimethyl-aminophenyl)-1-phenylethylene (M₂) were conducted in benzene at 25°C for 24h, using sec-butyllithium as initiator. Narrow molecular weight distribution copolymers with M?;_n = 16.1 × 10³ g/mol (M?_w/M?_n = 1.04) and 38.2 × 10³g/mol (M?_w/M?_n = 1.05), and 24 and 38 moles of M₂ per macromolecule, respectively, were characterized by size exclusion chromatography, ¹H NMR spectroscopy and DSC. The monomer reactivity ratio, r₁ = 5.6, was obtained from the copolymer composition at complete consumption of M₁, assuming that the rate constant k₂₂ =0,i.e. r₂ =0. The polymers exhibited T_g values of 128 and 119°C, respectively, which correspond to an estimated T_g = 217°C for the hypothetical homopolymer of M₂.     

SDH中泊松分布下误块率与误码率的关系分析

本文较详细地介绍了ＳＤＨ中的ＢＩＰ误码校验方式，推导了泊松分布下，ＢＩＰ误块率与误码率的一般关系式，给出了ＳＤＨ中几种典型的误块率与误码率的关系曲线，并做了计算机模拟验证     

氢/空气火焰在半开口有障碍管道中的传播特性

针对氢／空气混合物，通过实验研究了其预混火焰在半开口管道中的火焰传播加速现象。结果表明，火焰传播状态随着氢气当量比的变化而发生改变。当氢／空气混合物被点燃后，由于障碍物的扰动，火焰在管道中不断加速传播，并最终到达一准稳态传播。在氢气当量比0．34附近时，火焰速度发生跃变。当氢气当量比足够大时，火焰传播由爆燃态转变为爆轰态。在本实验条件下，爆燃转准爆轰的临界条件是d/λ=2.6(d是圆环形障碍物内径，λ是爆轰格胞尺度）。障碍物阻塞比的变化对最大火焰速度和压力提升的影响不明显。     

鱼雷罐喷粉预处理优化研究

在已经得到的描述鱼雷罐喷粉处理基本参数具体表达式的基础上，运用多目标非线性优化方法，对工艺操作参数进行优化。     

OFDM技术及其应用

首先对OFDM的发展以及应用做了简要的介绍,然后讨论了当前OFDM研究过程中的两个关键技术问题,最后展望了OFDM的未来发展。     

Application of Wavelet Packet De-noising in Time-Frequency Analysis of the Local Wave Method

The local wave method is a very good time-frequency method for nonstationary vibration signal analysis. But the interfering noise has a big influence on the accuracy of time-frequency analysis. The wavelet packet de-noising method can eliminate the interference of noise and improve the signal-noise-ratio. This paper uses the local wave method to decompose the de-noising signal and perform a time-frequency analysis. We can get better characteristics. Finally, an example of waveletpacket denoising and a local wave time-frequency spectrum application of diesel engine surface vibration signal is put forward.     

塔里木盆地塔中沙漠区高分辨率地震勘探效果

塔中沙漠区地表被北东—南西向条带状沙层所覆盖,地形起伏剧烈,松散沙层厚度变化巨大,给地震资料采集、处理、解释带来了很大的困难。通过联合攻关,从地震波激发能量下传和反射波接收的研究入手,实现了全部潜水面以下激发,因地制宜、避高就低埋置检波器优化观测系统;针对该区石炭系和志留系低幅度构造、薄储层圈闭难以落实,奥陶系内幕地震资料反射波能量弱、信噪比低、叠加成像困难等问题,开展了沙丘对地震波吸收衰减分析和补偿技术、地表一致性处理技术、多域迭代静校正技术、精细速度场模型确立和偏移成像等配套技术的研究开发与应用。从而极大地改善了塔中沙漠区地震资料的品质,使中深层的石炭系、志留系、奥陶系对应的地震剖面主频从18～20Hz提高到36～40Hz;形成了塔中沙漠区油气勘探技术系列,精细刻画了塔中Ⅰ号带,锁定了油气勘探目标,推动了台盆区油气勘探再掀新高潮。     

Production of biodiesel from waste fryer grease using mixed methanol/ethanol system

Transesterification of waste fryer grease (WFG) containing 5–6 wt.% free fatty acid (FFA) was carried out with methanol, ethanol, and mixtures of methanol/ethanol maintaining the oil to alcohol molar ratio of 1:6, and initially with KOH as a catalyst. Mixtures of methanol and ethanol were used for transesterification in order to use the better solvent property of ethanol and rapid equilibrium using methanol. Formation of soap by reaction of FFA present in WFG with KOH instigated difficulty in the separation of glycerol from biodiesel ester. To untangle this problem, two-stage (acid and alkali catalyzed) method was used for biodiesel synthesis. More than 90% ester was obtained when two-stage method was used compared to ∼ 50% ester in single stage alkaline catalyst. In the case of mixed alcohol, a relatively smaller amount of ethyl esters was formed along with methyl esters. Acid value, viscosity, and cetane number of all the esters prepared from WFG were within the range of the ASTM standard. Esters obtained from WFG showed good performance as a lubricity additive.