往复式压缩机管道振动的原因及处理

对往复式压缩机管道振动原因进行分析，提出了相应消振措施，并介绍了实施后的效果。     

Classical Approach to Analyzing the Influence of Edge Boundary Conditions on Stresses and Flexibility of Pipe Elastic Bend

A new analytical method is proposed for the analysis of boundary effect in a pipe bend portion loaded by bending moment combined with internal pressure. The proposed method is based on the simplifying hypotheses, which make possible to represent all deformation- and force-related parameters in terms of the tangential displacement assumed in the form of the Fourier series expansion by the circumferential coordinate. A set of quadric differential equations by axial coordinate containing unknown displacement expansion coefficients is derived. We obtained an analytical approximate solution for a pipe bend portion and precise solution for a straight pipe, which are expressed via Krylov functions. We formulate the application procedure for the method of initial parameter, where the values of tangential and longitudinal displacements, axial and tangential forces are used as boundary conditions. We present the equations relating the above-mentioned parameters in the initial and end sections of the pipe bend portion. The results obtained are compared with the available published data. __________ Translated from Problemy Prochnosti, No. 4, pp. 64 – 94, July – August, 2005.     

鞍钢无缝钢管厂总体改造框架探讨

介绍了鞍钢无缝钢管厂发展的历程,阐述了必须对其进行技术改造的理由,提出了改造的具体原则及设想.     

涡流探伤在钢管生产中的应用

介绍了钢管涡流探伤的原理、特点;涡流探伤方法对钢管缺陷的检测及对检出缺陷的处理方法,影响涡流探伤的因素及涡流检测的局限性。     

A very light and thin liquid hydrogen/deuterium heat pipe target for COSY experiments

A liquid hydrogen/deuterium heat pipe (HP) target is used at the COSY external experiments TOF, GEM and MOMO. The target liquid is produced at a cooled condenser and guided through a central tube assisted by gravitation into the target cell. An aluminum condenser is used instead of copper, which requires less material, improves conductivities and provides shorter cooling down time. Residual condenser temperature fluctuations in the order of ≈0.4 K are reduced by using thermal resistances between the cooling machine and the condenser of the heat pipe combined with a controlled heating power. A new design with only a 7-mm-diameter HP has been developed. The diameter of the condenser part remains at 16 mm to provide enough condensation area. The small amount of material ensures short cooling down times. A cold gas deuterium HP target has been designed and developed which allows protons with energy ?1 MeV to be measured. A 7-mm-diameter HP is used to fill a cooling jacket around the D₂ gas cell with LH₂. The D₂ gas is stabilized at 200 mbar to allow for thin windows. Its density is increased by factor 15 compared to room temperature.     

圆管临界热流密度的流体模化

为了评价现有的临界热流密度(CHF)流体模化技术,在氟里昂-12热工实验装置上完成了φ202.5圆管CHF实验。在此基础上,用不同的数据源,比较了Ahmad补偿失真模型、鲁钟琪模型、Groeneveld模型和Stevens-Kirby经验比例因子模型的预测精度和适用范围,为复杂流道中的CHF流体模化研究奠定了基础。     

负压波定位理论在输油管道泄漏监测系统中应用

本文主要讲述了负压波理论在输油管道泄漏监测系统的具体应用情况，分析了采用同压波理论进行泄漏定位的过程中时间差的求解问题，提出了三种求取时间差的方法，通过负压滤理论的定位公式以及时间差对泄漏点进行定位。     

山西化肥厂225t/h-10.6MPa/535锅炉过热器爆管分析和改进

山西化肥厂从联邦德国Steinmuller公司引进的两台225t/h 10.6MPa/535锅炉在启动初期过热器一段发生严重的爆管,经过对过热器的改进,安装节流孔板,已能达到稳定运行。     

新安江水力发电厂▽38坝前引水管改造

部分早期建造的水电站的技术供水管道用的是铸铁管,对于无法更换的部分一旦出现裂纹很难处理.新安江水电厂坝前引水管改造中,在铸铁管外面增设一层按密封承压设计的新钢管,并在新、旧钢管之间灌注填料,这为老电站铸铁管的改造提供了一种有效方法.     

宝钢纯净钢生产技术进步

重点叙述了宝钢在钢中碳、氮、氧、磷、硫以及夹杂物控制方面的技术进步.并介绍了宝钢IF钢、管线钢所达到的纯净度综合水平.