加强技术创新管理 实现跨越式发展

广钢集团通过加强技术创新管理，取得了一定成效，实现跨越式发展。本文对其进行介绍，为同行提供借鉴。     

SGM装车机油的研制和应用

中国石化上海高桥分公司炼油厂针对上海通用汽车有限公司(SGM)的别克轿车，先后进行了9986126SGM、9986125SGM装车机油的开发认证工作以及研制油在别克车上的适应性试验。配方研制遵照ACC规范、API基础油互换规则及粘度等级互换规则，各项性能满足技术指标规定的质量要求；同时30000km的高温高速行车试验结果表明，研制油具有较好的抑制氧化增稠能力、优良的高温抗氧化性能、清净分散性能和抗磨损性能，在上海通用别克轿车上取得了良好的使用效果。     

岔河集油田开发调整的主要做法与成效

岔河集油田有多个受构造、岩性双重因素控制的中低渗透复杂断块油藏,其主要储集层为河流相沉积。油田20余年的开发历程是典型的滚动勘探开发过程。通过精细科学的地质研究,不断的实践和认识,制定出与其油田地质特点相适应的开发方针,完善了井网部署与加密、产吸剖面调整、油水井配套综合治理等一系列开发对策,并取得了比较好的开发效果。岔河集油田的开发实践对于类似油田开发不乏成功的经验。     

Development of a fuzzy decision model for manufacturability evaluation

A manufacturability evaluation decision model is formulated and analyzed based on fuzzy logic and multiple attribute decision-making under the concurrent engineering environment. The study emphasizes on the treatment of the linguistic and vagueness at the early product development stage. The study also considers the function integration of the total life cycle of a product. Hence, the integrated decision model covers the multi-level, multi-goal requirements of the products. Multiple criteria such as the goal space, the decision space, the function space, the development (i.e., product & process design) space, and the activity space, are then applied under different analysis of decision-making methods. For instances, the fuzzy multiple attribute decision-making (FMADM) combined with activity-based costing (ABC) can be used in the activity decision space. The fuzzy logic decision model can be applied in the goal decision space. The results of this study point out the importance of early decision making capability. An example of a high-pressure vessel is provided to demonstrate the proposed model for evaluating the manufacturability.     

Assessing the potential of renewable energy sources in Turkey

To meet Turkey’s growing energy demand, the installed electric power capacity of 27.8 GW in 2001 has to be doubled by 2010 and increased fourfold by 2020. The difference between Turkey’s total primary energy supply (TPES) of from its own sources and total final consumption (TFC) is projected grow from 1 quad (1.06–2.06) in 1999 to 5.71 quads (2.79–8.5) in 2020 (1 QUAD=293.071 TWh). Turkey’s limited amount of fossil fuels has a present average ratio of proved reserves of 97.38 quads to production rate of 3.2 quads yr⁻¹ of about 30 years. Turkey’s reliance on fossil fuel-based energy systems to meet the growing demand is most likely to exacerbate the issues of energy insecurity, national environmental degradation, and global climate change in increasing proportions. Economically-feasible renewable energy potential in Turkey is estimated at a total of ca. 1.69 quads yr⁻¹ (495.4 TWh yr⁻¹) with the potential for 0.67 quads yr⁻¹ (196.7 TWh yr⁻¹) of biomass energy, 0.42 quads yr⁻¹ (124 TWh yr⁻¹) of hydropower, 0.35 quads yr⁻¹ (102.3 TWh yr⁻¹) of solar energy, 0.17 quads yr⁻¹ (50 TWh yr⁻¹) of wind energy, and 0.08 quads yr⁻¹ (22.4 TWh yr⁻¹) of geothermal energy. Pursuit and implementation of sustainability-based energy policy could provide about 90 and 35% of Turkey’s total energy supply and consumption projected in 2010, respectively. Utilization of renewable energy technologies for electricity generation would necessitate about 23.2 Mha (29.8%) of Turkey’s land resources.     

Development of alternative technical systems

This paper considers the integration of alternative technical systems (TS) belonging to a wider class of competing TS, into a supersystem. The paper introduces the notion of alternative TS, shows the peculiarities of their incorporation into a supersystem, reveals the mechanisms used for such incorporation, and shows areas of application for the suggested method.     

国产掘进机在龙门滩引水隧洞施工中的应用

在长隧洞的施工中，采用掘进机施工的工程越来越多，特别是国外掘进机的引进，加快了长隧洞工程的开发。而国产掘进机由于其性能和材质方面的原因，存在着一定的技术缺陷．通过国产SJ-45型掘进机在龙门滩工程的施工应用，分析和总结了SJ-45型掘进机的机械性能和存在的技术问题及处理结果，以利于国产掘进机的科研、生产和施工。     

区域可持续发展决策支持模拟系统研究

本文先给出区域可持续发展指标体系；讨论了区域可持续发展决策支持模拟系统及其组成部分，给出区域可持续发展决策支持模拟系统的总体构架，数据库、模型库管理系统及其设计。最后以广州市为例，给出可持续发展决策支持模拟系统的使用效果。     

煤系高岭土制备裂化催化剂的探索性研究

从石嘴山煤系高岭土的分析测实,经过改性处理,实验后得出具有碱改性条件,且制备裂化催化剂后重油转化能力有明显提高,开拓了煤系高岭土在石化领域的应用。     

Learning Organizations in Construction

The transformation of organizations from production-oriented entities to proactive learning entities that continuously leverage the knowledge of the workforce is a primary objective of management researchers. This focus has significant relevance to the construction industry where production-related research has predominantly overshadowed organizational development research. As one effort to change this emphasis, the writers present a research effort designed to study current organization learning techniques and technologies fielded by organizations both inside and outside of the construction industry. Through a series of exploratory case studies, the writers developed a maturity model together with the Construction Industry Institute that provides construction organizations with a framework for developing a learning organization culture. The maturity model focuses on learning organization characteristics of leadership, processes and infrastructure, communication/collaboration, education, and culture at the organization, community, and individual levels. This paper introduces the results of that effort including a presentation of the learning organization maturity model, framework application, and the overall characteristics of a learning organization.