低速爆轰管对黑火药的点传火性能研究

文章采用中心点火管结构的实验装置研究了黑火药的点传火性能。用低速爆轰 (L VD)中心点火管来点燃黑火药时 ,1# ～ 3# 大粒黑药的传火速度为 70 0 m· s-1～ 80 0 m· s-1数量级 ,燃烧波宽度在 3.1ms～ 3.5 ms,最大压力峰值 :1# 为 36 .4 MPa,2 # 为 2 4 .0 MPa,3# 为 38.0 MPa。用普通中心点火管点燃黑火药时 ,2 # 、3# 和钝化 2 # 大粒黑的传火速度分别为 6 1.2 m· s-1、6 8.2 m·s-1和 4 0 .1m· s-1,最大燃烧波宽度分别为 9.2 ms、6 .3ms和 9.5 ms。燃烧波表明 ,L VD中心传火管与普通中心传火管相比较 ,在传火管的不同位置处 ,前者的 P- t曲线一致性远高于后者。     

利用短周期地脉动推断深层地基S波速度

从二维随机波场的相关理论出发，提出了如何从短周期地脉动（频率＞０．５Ｈｚ）时域信号中计算Ｒａｙｌｅｉｇｈ波弥散曲线，进而反演深层地基剪切波（Ｓ波）速度的理论方法和分析技术，并结合实测信号的分析结果，探讨了该方法的可行性和实用性。     

2006年SEG年会反映的各向异性研究新进展

介绍了2006年SEG年会上所反映的各向异性研究的新进展，主要包括：提高速度分析精度的各向异性速度分析参数正交化方法；影响裂隙储层预测的地震波动力学与运动学特征差异分析；验证现行裂隙硬币理论模型可靠性的不规则裂隙有效弹性参数计算分析；提高计算效率的波场延拓各向异性参数参考值优选Lloyd算法；常见TTI介质不同成像方法试验效果的比较。     

Paste Residence Time in a Spouted Bed Dryer. II: Effect of Spout Operational Conditions

Residence time distributions for an aqueous solution of 10% sodium chloride in a spouted bed dryer of inert particles were determined using the stimulus-response technique. Glass and polyethylene beads with diameters 2.6 and 3.4 mm were used as inert bodies in a cylindrical column of 14.0 cm diameter and 60° conical base. The effects of inert bodies load, air, and paste flow rates on the mean residence times and RTD were determined following 2³ factorial designs. The RTD could be correlated to the perfect mixing cell model with R² varying from 0.8684 to 0.9815. The mean residence times in CSBD varied from 10.8 to 13.9 and 10.7 to 13.3 min for glass and polyethylene beads, respectively. For both inert particles, mean residence times increased with bed height and decreased with paste feed rates. Also, terms of interaction among the factors were significant in some cases, showing a complex behavior of paste residence times. Equations obtained by response surface regression could predict mean residence times on glass and polyethylene beads with deviations lower than ±10%.     

爆炸箔起爆系统初始电阻对爆发电流和飞片速度影响的数值模拟

研究了电爆炸箔起爆系统起爆回路初始电阻对爆发电流和冲击片雷管飞片速度的影响规律，分析了影响电爆炸箔起爆系统体系的因素，为在可靠发火条件下降低起爆系统体积提供设计参考。     

Non-Steady Equilibrium during Pro-Eutectoid Ferrite Formation in Fe-0.2C Alloy

Ｔｈｅｐｒｅｃｉｐｉｔａｔｉｏｎｏｆｐｒｏ ｅｕｔｅｃｔｏｉｄｆｅｒｒｉｔｅｆｒｏｍａｕｓｔｅｎｉｔｅｉｓｃｏｎｔｒｏｌｌｅｄｂｙｄｉｆｆｕｓｉｏｎｉｎＦｅ Ｃａｌｌｏｙｓ .Ｗｉｔｈｔｈｅａｓｓｕｍｐｔｉｏｎｔｈａｔｔｈｅｍｉｇｒａｔｉｎｇｉｎｔｅｒｆａｃｅｉｓａｌｗａｙｓｉｎｌｏｃａｌｅｑｕｉｌｉｂｒｉｕｍ ,ｅａｒｌｙｉｎ 194 9,ＺｅｎｅｒＣ[1] ｅｘｐｌａｉｎｅｄｔｈｅｄｉｆｆｕｓｉｏｎａｌｇｒｏｗｔｈｏｆｐｒｏ ｅｕｔｅｃ ｔｏｉｄｆｅｒｒｉｔｅｂｙｕｓｉｎｇｔｈｅＦｉｃｋ’ｓｌａｗ .Ｓｉｎｃｅ…     

固液相变蓄能的数学模型和自然对流换热系数的实验研究

引入自然对流换热系数 ,将固液蓄能数学模型简化为仅用能量方程加以描述。并通过实验测得相变过程的实际温度场 ,证明了自然对流固液相变换热的影响不可忽略 ,验证了固液相变界面移动速率随自然对流换热系数的增大而增大的定性关系     

VTI介质中弹性参数地震反演方法

根据地震波在具有垂直对称轴的横向各向同性（VTI）介质中的运动学特征，应用传播时间反演方法，进行了水平层状VTI介质的地层弹性参数反演方法研究。在VTI介质中，P－P波的传播时间曲线不再是双曲线，尤其在长排列情况下，已不能用二项泰勒展式精确地反演P－P波的传播时间，用三项泰勒展式则可以达到更高精度；P－SV波的传播时间也可用三项泰勒展式表达，在中等及短排列长度时可达到一定精神。对P－P波、P－SV波的传播时间进行三项泰勒展开时，它们的系数中包含了地震波的各向异性信息及垂直速度信息，中以为地震波的弹性参数反演提供提供基础，模试验分析及江苏油田某地区的二维多波资料实际反演结果表明，在最大炮间距为1．5倍地层埋深时，可以很精确地得到三项泰勒展式的系数，应用这些系数能精确反演地层弹性参数，包括P波、S波的垂直速度和各向异性参数。图4表1参5（杜丽英摘）     

Mechanical and thermal properties of HVOF sprayed Ni based alloys with carbide

The objective of the present study is to develop multi-functioned coating to the components, which are made of copper with electroplated Ni and are widely used for steel making industry. In this paper, we report the mechanical and thermal properties of Ni based superalloys with carbide sprayed by high velocity oxygen fuel (HVOF), and the detailed effects of sprayed material, spraying conditions, and initial powder structure on these properties. It was found that, among commercial Ni self-fluxing alloys (without fusing treatment), coating with a carbon content of 0.58 mass% had the most preferable properties, with a good balance of the hardness, strength, and thermal shock resistance. The thermal shock resistance depended not only on the strength of the coating but also on the volume contraction when tested at high temperatures. For the several developed Ni based superalloys with carbide, Ni20Cr8Mo5Fe–WC and Ni16Cr15Mo3–WC demonstrated the prominent adhesion strength and thermal shock resistance with high Galvanic corrosion resistance through optimized spraying condition. Also, 20 mass% NiCr–Cr₃C₂ coating sprayed by using employed relatively small primary particle succeeded in achieving the multi-superior properties; high adhesion strength, high corrosion resistance and thermal shock resistance.     

Influence of load and speed on wear characteristics of grey cast iron in dry sliding — selection for minimum wear

The wear of grey cast iron in dry sliding conditions has been studied with the aims of (1) finding the influence of working conditions on the wear rate, and (2) determining the region of speed and load where low wear is accomplished. Grey cast iron with flake and nodular graphite was submitted to investigation using a pin-on-disc machine. The results indicate that the flake graphite cast iron is more suitable for applications at speeds greater than 4 m s⁻¹ and lower loads, while nodular cast iron has greater wear resistance at lower speeds in the range of loads investigated - from 50 N cm⁻² to 200 N cm⁻²