在文明寨地区的高精度地震资料处理实践

文明寨地区构造复杂，断块多，岩性变化大，一些地质问题不明，需要高精度三维资料处理来提高资料的纵、横向分辨率^[1][2]及为储层、油藏研究提供精确的依据。针对东濮文明寨地区高精度处理过程中的关键技术进行了大量分析试验，形成了一套适合东濮地区的较为完整的3D高精度地震资料处理流程。实际资料处理表明效果较好。     

Release rates of tetradecen-1-ol acetates from polymeric formulations in relation to temperature and air velocity

An apparatus was developed for investigating the release rates of pheromone formulations at temperatures and air velocities that correspond with those in the field. Polyurethane foam proved an excellent adsorbent for the recovery of tetradecen-1-ol acetates, allowing high air flows at low differential pressure and without breakthrough of these compounds. The experimental setup and procedures are described. The release rates of all formulations investigated were almost proportional to the square root of air velocity, and their logarithms were proportional to the reciprocal of temperature (K). When temperature is increased from 15°C to 25°C, the release rates increase by about 2-2.5 ×. Both relationships were combined into one equation that allows a reliable estimate to be made of the actual release rates of a formulation, under varying conditions, on the basis of its specific parameters and the relevant meteorological data.     

Liquid spouting of pulp fibers in a conical vessel

Pulp fibers can be spouted in water in a conical vessel. The entities which are spouted are fiber flocs rather than individual fibers. Synthetic fibers, which do not flocculate, cannot be spouted. For comparison, rigid spherical particles were spouted with water in the same conical vessel. Liquid spouting of rigid particles was similar to gaseous spouting. For pulp spouting, the minimum spouting velocity is proportional to the mass of fibers in the bed and inversely proportional to the diameter of the inlet. For rigid particles, the minimum spouting velocity is proportional to the height of the bed and inversely proportional to the square of the diameter of the inlet. A model for the minimum spouting velocity was developed for pulp spouting.     

Finite-time consensus of multiple second-order dynamic agents without velocity measurements

This article considers the finite-time consensus of multiple second-order dynamic agents without velocity measurements. A feasible protocol under which each agent can only obtain the measurements of its position relative to its neighbours is proposed. By applying the graph theory, Lyapunov theory and the homogeneous domination method, some sufficient conditions for finite-time consensus of second-order multi-agent systems are established under the different kinds of communication topologies. Some examples are presented to illustrate the effectiveness of the theoretical results.     

用激光技术测定液体中的声速和等熵压缩性系数

本文应用根据激光光声原理和技术建立的流体热力学性质测量实验装置，测定了七个温度下苯、四氯化碳液体中，苯与四氯化碳二元溶液中的声速（ｕ）、密度（ρ），计算了等熵压缩性系数（Ｋ＿ｓ）等热力学数据。用多项幂级数，以最小二乘法拟合声速ｕ与温度ｔ的数学关系。实测的声速值与文献值比较，相对误差小于０．０４％，等熵压缩性系数与文献数据也相当吻合。     

Molar volume and ultrasonic studies of europium soaps in mixed organic solvents

The ultrasonic velocity and density measurements of europium soaps in a mixture of benzene and methanol (3:2, vol/vol) were used to evaluate various acoustic parameters and molar volume and to determine the critical micelle concentration. The results showed that the ultrasonic velocity, specific acoustic impedance, molar sound velocity, and molar compressibility increase, and intermolecular free length, adiabatic Compressibility, and relative association decrease with increasing concentration and chainlength of the soap. The results were interpreted in terms of soap-solvent interaction.     

Propagation of the Chain Explosive‐Decomposition Reaction in Silver Azide Crystals

The velocity of the chain explosivedecomposition reaction in silver azide whiskes has been measured (1500 m/sec). The measured velocity is identified as the propagation velocity of the diffusion front of holes generated in the course of explosive decomposition.     

水流掺气对明流泄洪洞及挑坎水力特性的影响

水流充分掺气可以避免高流速泄洪设施发生空蚀,但也会改变相关水力特性。通过对某大坝泄洪洞掺气设施水力模型试验及关于水流表面自掺气发生条件的相关分析,提出了在全程流速超过38 m/s,长度达550 m的明流洞内仅布置一级掺气设施的建议,较通常情况减少了两级;并针对泄洪洞出流方向与河道流向交角达60°的特点,研究提出了一种大差动异型鼻坎消能工。水工模型试验成果表明,其挑流水舌沿河道纵向扩散良好,水舌外缘与河道对岸保持了30 m以上的安全距离。该泄洪洞建成后经历了高水头、较长时间的泄洪运行,明流洞和鼻坎消能工均无空蚀发生,但挑坎水舌却冲刷到对岸边坡。     

"大肚子"环空液体流动规律的实验研究

针对现场固井在"大肚子"环空段封固质量较差的情况,本文研制了含有"大肚子"环空段的注水泥(液体)流动模拟实验装置。利用该装置,研究井径扩大率、流量、液体流变性能等对"大肚子"环空处的流速场的影响规律。得到了不同情况下(井径扩大率、流量、液体流变性能等变化)"大肚子"环空段不同位置径向截面的流速曲线变化情况,为研究"大肚子"环空段的顶替机理提供了一定的数据资料。     

Detonation velocity of BTNEN/Al

The effect of the addition of Al on the detonation velocity of bis(2,2,2-trinitroethyl) nitramine (BTNEN) was studied experimentally. It is shown that the dependence of the detonation velocity of BTNEN on the initial density is nearly linear, and a 75/25 BTNEN/Al mixture is characterized by an increase in the slope of the dependence with increasing density. The addition of Al decreases the detonation velocity of BTNEN. The density range characterized by a maximum decrease in the detonation velocity is determined. A comparison of experimental detonation velocities of BTNEN/Al mixtures with literature data obtained by calculations taking into account a possible change in the phase state of Al₂O₃ showed that the thermodynamic model used in the calculations needs to be improved. __________ Translated from Fizika Goreniya i Vzryva, Vol. 42, No. 4, pp. 125–130, July–August, 2006.