Study on diffusion welding SiCp/ZL101 with Cu interlayer

Through the vacuum diffusion welding SiCp/ZL101 aluminum with Cu interlayer,the effect of welding parame-ter and the thickness of Cu on the welded joint property was investigated,and the optimal welding parameters were putforward at the same time.The microstructure of joint was analyzed by means of optical-microscope,scanning electron mi-croscope in order to study the relationship between the macro-properties of joint and the microstructure.The results showthat diffusion welding with Cu interlayer could be used for welding aluminum matrix composites SiCp/ZL101 successfully.     

CYCLIC DEFORMATION BEHAVIOUR OF Cu SINGLE CRYSTALS ORIENTED FORDOUBLE SLIP Ⅱ. Persistent Slip Bands and Deformation Bands

用光学显微镜和扫描电镜研究了双滑移取向（［０３４］，［１１７］）Ｃｕ单晶循环饱和后的表面形貌，塑性分切应变幅（γｐｌ）低于１０~（－３）时，［０３４］晶体表面上要为主滑移系的驻留滑移带（ＰＳＢｓ）占据，次滑移只在边缘区域启动，其ＰＳＢｓ细窄（＜１μｍ），体积百分数在１％以下．γｐｌ＞１０~（－３）时，次滑移开始在试样的中部启动，同时，表面出现二种贯穿晶体的宏观形变带（ＤＢＩ，ＤＢＩＩ），滑移带在形变带内集中．［１１７］晶体在γｐｌ＝４．４×１０~（－４）时，双滑移现象已十分明显．γｐｌ＞１０~（－３）时，表面也形成与前者相似的形变带．ＤＢＩ的惯习面与主滑移面平行（［０３４］晶体）或接近（［１１７］晶体），ＤＢＩＩ的惯习面则与前者垂直，文章讨论了形变带形成的可能原因．     

空冷淬火Cu-Zn-Al合金马氏体结构及稳定化现象

利用Ｘ射线衍射强度分析、透射电镜观察、相变点测量等方法研究了空冷淬火态Ｃｕ１８Ｚｎ１４Ａｌ合金马氏体结构及其稳定化现象。认为该合金空冷淬火可获得长程有序完全的Ｍ１８Ｒ马氏体，其有序组态为Ａｌ原子与Ｃｕ原子、Ｚｎ原子与Ｃｕ原子两种近邻（ｎｎ）有序（Ｋ＝偶，Ｈ＋Ｋ／２＝奇），以及产生Ｋ＝奇的衍射中Ａｌ原子与Ｚｎ原子次近邻（ｎｎｎ）有序。其基面原子分布为：Ⅰ—１４２５Ａｌ＋１１２５Ｃｕ、Ⅱ—Ｃｕ、Ⅲ—１８２５Ｚｎ＋７２５Ｃｕ。与此相对应，该合金相应为Ｈｅｕｓｌｅｒ结构。该合金在充分有序化的条件下仍存在马氏体稳定化。     

All Ag Nanoparticles Are Not the Same: Covalent Interactions between Ag Nanoparticles and Nitrile Groups Help Combat Drug- and Ag-Resistant Bacteria

Antimicrobial resistance has long been viewed as a lethal threat to global health. Despite the availability of a wide range of antibacterial medicines all around the world, organisms have evolved a resistance mechanism to these therapies. As a result, a scenario has emerged requiring the development of effective antibacterial drugs/agents. In this article, we exclusively highlight a significant finding reported by Zbořil and associates (Adv. Sci. 2021, 2003090). The authors construct a covalently bounded silver-cyanographene (GCN/Ag) with the antibacterial activity of 30 fold higher than that of free Ag ions or typical Ag nanoparticles (AgNPs). Ascribed to the strong covalent bond between nitrile and Ag, an immense cytocompatibility is shown by the GCN/Ag towards healthy human cells with a minute leaching of Ag ions. Firm interactions between the microbial membrane and the GCN/Ag are confirmed by molecular dynamics simulations, which rule out the dependence of antibacterial activity upon the Ag ions alone. Thus, this study furnishes ample scope to unfold next-generation hybrid antimicrobial drugs to confront infections arising from drug and Ag-resistant bacterial strains.     

Functionalized metal–organic frameworks with strong acidity and hydrophobicity as an efficient catalyst for the production of 5-hydroxymethylfurfural

In the dehydration of fructose to 5-hydroxymethyl furfural(HMF), in situ produced water weakens the acid strength of the catalyst and causes the rehydration of HMF, causing unsatisfactory catalytic activity and selectivity. In this work, a class of benzenesulfonic acid-grafted metal–organic frameworks with strong acidity and hydrophobicity is obtained by the direct sulfonation method using 4-chlorobenzenesulfonic acid as sulfonating agent. The resultant MOFs have a specific surface area of greater than 250 m~2·g~(-1), acid density above 1.0 mmol·g~(-1), and water contact angle up to 129°. The hydrophobic MOF-Ph SO_3 H exhibits both higher catalytic activity and selectivity than MOF-SO_3 H in the HMF synthesis due to its better hydrophobicity and olephilicity. Moreover, the catalyst has a high recycled stability. At last, fructose is completely converted, and 98.0% yield of HMF is obtained under 120 °C in a DMSO solvent system. The successful preparation of the hydrophobic acidic MOF provides a novel hydrophobic catalyst for the synthesis of HMF.     

Exploring the methods on improving CH4 delivery performance to surpass the Advanced Research Project Ageney-Energy target

CH_4 storage associated with adsorbed natural gas(ANG) technology is an issue attracting great concern.Following the Advanced Research Project Agency-Energy(ARPA-E) targeted deliverable capacity of 315 cm~3·cm~(-3)(STP), hundreds of thousands of materials have been experimentally or theoretically evaluated,while the best results still show a 35% gap from the target. Moreover, recent theoretical research reveals that the target is beyond the possibility that real materials can be designed. To get rid of the awkward situation, we make attempts on investigating the CH_4 delivery performance under other operation conditions. Methods of raising the discharge temperature(to infinite high) or elevating the storage pressure(to 25 MPa) have been proved to show limited effectiveness. In this work, it is found that the ARPA-E target can be achieved by using a decreasing storage temperature strategy. By taking 280 Co RE(computation-ready, experimental) COFs(covalent organic frameworks) as ANG materials, when reduce the storage temperature to 190.6 K, the highest deliverable capacity can reach 392 cm~3·cm~(-3)(STP), and16.1% Co RE COFs can surpass the target. The target is also achievable when storage at 220 K. Structure performance relationships study shows strong correlation between deliverable capacity and void fraction. Hence, 120 hypothetical COFs are generated to ascertain the optimum void fraction. In addition,the performance of 2 D-COFs can be greatly enhanced by increasing the interlayer spacings, e.g. CH_4 deliverable capacity(storage at 190.6 K) of ATFG-COF can be improved from 239 to 411 cm~3·cm~(-3)(STP) when interlayer spacing is enlarged to 1.65 nm.     

Robust Superhydrophobic Fabric for Durability,Self-Cleaning,and Oil/Water Separation via Thiol–Acrylate Polymerization

In recent years, highly efficient oil/water separation materials have brought much attention. It requests superhydrophobic surfaces with a rapid and facile separation process, excellent durability, and large-scale fabrication. Herein, a facile vapor-liquid sol-gel, and free radical polymerization reaction method to prepare the durable and robust superhydrophobic cotton fabric is proposed. Moreover, the fabric can be used for highly efficient and various oil/water separation. It is prepared via a simple two-step process, including a vapor-liquid sol-gel process to deposit with thiols particles, and then followed a free radical polymerization reaction to graft 2,2,3,4,4,4-hexafluorobutyl methacrylate. Scanning electron microscopy and Fourier transform infrared spectrometry prove that the rough structures are generated from the hydrolysis condensation reaction between tetraethyl orthosilicate and 3-mercaptopropyltriethoxysilane. As a result, the synthetic chemical composition provided by the natural fabric and silica nanoparticles synergistically construct a superhydrophobic surface with water contact angles and shedding angle of 158° and 9°, respectively. Additionally, the treated fabric exhibits excellent chemical resistance and self-cleaning ability. Remarkably, the fabric still retains superhydrophobic and excellent mechanical robustness after 30 cycles of various oil/water separation. In summary, the resultant fabrics with excellent chemical resistance, remarkable mechanical robustness, and versatile separation abilities have potential applications in various oil/water separations.     

Stereocomplex Crystallization Induced Significant Improvement in Transparency and Stiffness–Toughness Performance of Core-Shell Rubber Nanoparticles Toughened Poly(l-lactide) Blends

Toughening modification of poly(l -lactide) (PLLA) with rubber particles is often realized at the cost of transparency, mechanical strength, and modulus because high rubber loadings are generally required for toughening. In this work, a promising strategy to simultaneously improve the transparency and stiffness–toughness performance of poly(butyl acrylate)-poly(methyl methacrylate) (BAMMA) core-shell rubber nanoparticles toughened PLLA blends by utilizing the stereocomplex (SC) crystallization between PLLA and poly(d -lactide) (PDLA) is devised. The results reveal that the construction of SC crystallites in PLLA matrix via melt-mixing PLLA/BAMMA blends with PDLA can prevent BAMMA nanoparticles from aggregation and promote them to form network-like structure at lower contents. As a result, not only higher toughening efficiency with less rubber contents but also superior transparency is achieved in the PLLA/PDLA/BAMMA blends as compared with the PLLA/BAMMA ones where large aggregated BAMMA clusters are formed. Moreover, the outstanding reinforcement of SC crystallites network for PLLA can impart an enhanced tensile strength and modulus to PLLA/PDLA/BAMMA blends, thus improving the stiffness–toughness performance of PLLA/PDLA/BAMMA blends to a higher degree. This work demonstrates that SC crystallization is a promising solution to solve the contradiction between transparency and mechanical properties and then obtain superior comprehensive performances in rubber toughened PLLA blends.     

The Synthesis of Covalent Triazine-Based Frameworks via Friedel–Crafts Reactions of Cyanuric Chloride with Thienyl and Carbazolyl Derivatives for Fluorescence Sensing to Picric Acid,Iodine and Capturing Iodine

A multifunctional thiophene-based covalent triazine framework (TTPATTh) with triphenylamine as core is synthesized by Friedel–Crafts reaction of cyanuric chloride with thienyl derivative for the first time. The yield of TTPATTh (99.59%) is far higher than that of the carbazole-based CTF (TTPATCz, 47.03%). TTPATTh and TTPATCz possess high BET surface areas with 1235 and 2501 m² g^–1 as well as high pore volumes with 1.60 and 2.23 cm³ g^–1, respectively. TTPATTh and TTPATCz have high thermal stability with high thermal decomposition temperatures of 514 and 598 °C in nitrogen atmosphere. With the introduction of triazine rings, the fluorescence sensing sensitivities of TTPATTh and TTPATCz to picric acid and iodine are improved significantly. Especially for TTPATTh, the K_sv values reach 5.95 × 10⁵ and 1.61 × 10⁴ L mol^–1, and LODs reach 1.02 × 10^–12 and 1.86 × 10^–12 mol L^–1. To the best of the knowledge, this is the most sensitive value among thiophene-based porous organic polymers to PA and I₂. Furthermore, TTPATTh and TTPATCz can also adsorb iodine in vapor phase, cyclohexane solution and aqueous solution, and release iodine by heating or in ethanol solution. The efficiency of controlling the release of iodine is higher than that in ethanol.     

Degradable Superhydrophilic Iron-Pillared Bentonite Doped with Polybutylene Adipate/Terephthalate Open-Cell Foam: Its Application in Dye Degradation,Removal of Heavy Metal Ions,and Oil–Water Separation

Development of industrialization has brought convenience to people's lives; however, it has also brought serious harm to the environment, where, water pollution is the most obvious. Here, a polybutylene adipate terephthalate (PBAT) open-cell foam doped with iron-pillared bentonite (IPB) is prepared by using sugar as a pore-forming agent and solution phase separation, and then combined with a solution dipping method to coat the foam surface with a polyacrylamide/SiO₂, which makes the PBAT foam superhydrophilic. The static adsorption effect of superhydrophilic IPB-doped PBAT open-cell foam on methylene blue (MB) and Cu²⁺ is studied. The adsorption isotherm fitting shows that the adsorption conforms to the Langmuir model and it has biased toward monolayer adsorption. The adsorption kinetics fitting confirms that the adsorption process is in line with the pseudo-second-order adsorption model, which is dominated by chemical adsorption. The modified PBAT open-cell foam has an adsorption effect on Cu²⁺; however, it has weak cyclic adsorption capacity. It shows a good cyclic adsorption ability for the cationic dye MB and it has >95% photodegradation efficiency of the MB after five time's cyclic adsorption. The superhydrophilicity makes the foam to have better applications in oil–water separation.