3-D hydrodynamics generated in a stirred vessel by a multiple-propeller system

The aim of this study is to optimize the position and the number of propellers in a non-standard tall vessel. Laser sheet flow visualization experiments were carried out for selected geometrical arrangements which produced stable flow patterns and good transport between the propellers. Four double-propeller arrangements corresponding to frequent industrial cases and a three-propeller system have been chosen. Comparison of LDA measurements in the r-z plane, dimensionless global parameters N_Qp, Nt_m, N_p, E_p and spatial distribution of local energy dissipation rate ? shows that a three-propeller system is the most efficient.     

Heavy metals contribution of non-aqueous fluids used in offshore oil drilling

A monitoring program was performed to investigate heavy metal content alteration due to exploratory drilling for oil using non-aqueous fluids (NAFs) in Brazilian offshore, 900 m deep. Fourteen elements were monitored in 54 sites and it was verified that after drilling activities the average Ba concentration was remarkably increased with respect to background level, even 1 year after the activity. A minor increase in Mn and a moderate increase in Al concentrations were verified. The Cd, Cr, Ni, As, Co, Cu, Pb, V, and Zn concentrations were at the background levels, ca. 1 year after the NAFs drilling materials deposition on the seafloor. The Al, Ba, Cd, Cr, Cu, Ni and Zn mean concentrations were significantly different (P<0.05) between the three sampling operations (cruises) performed, while As, Cd, Fe and Pb presented different mean values according to the distance of the oil well, independent of the sampling operation. Interaction between sampling operation and distance was observed for Mn. In all sediment samples the Hg concentration was below the detection limit (0.07 μg g⁻¹).     

尿素生产中尿液的不稳定流动对尿素一分塔的影响

介绍了水溶液全循环法尿素生产系统中,一分塔的精馏段由泡罩塔盘改为规整填料后出现的一系列问题,针对尿液的不稳定流动造成一分塔规整填料严重腐蚀的原因,进行分析并提出整改和预防措施。     

利用煤层气发展山西合成油工业探讨

介绍了国外利用天然气生产油口的生产工艺，探讨了山西省利用丰富的煤层气资源发展合成油的可能性和优势，并提出了相应的发展建议。     

Kinetics of the decomposition of total aliphatic waxes in olive oil during deodorization

Changes in the content of aliphatic waxes during industrial deodorization and/or physical refining of bleached olive oil were studied in an experimental discontinuous pilot plant of 250 kg deodorizer using nitrogen as stripping gas in place of steam. The kinetic constants for the decomposition of waxes during the deodorization process were determined. The reaction orders studied are zero (or can be considered zero) within the working interval. The values of rate constants, activation energy, frequency factor, increment of activation Gibbs free energy, activation enthalpy, and activation entropy are established.     

催化裂解废旧不饱和聚酯树脂新技术

对不饱和聚酯树脂 (UPR)废料裂解制原料油技术进行了研究 ,系统地考察了催化裂解反应工艺条件。试验结果表明 ,催化裂解所需反应温度为 40 0～ 45 0℃ ,反应时间为 70～ 80min ;剂油比 1∶5 ;试验对 4种催化剂的催化性能进行了评价 ,研究表明单独使用YB -2催化剂 ,液相产品收率为 5 8.2 2%～ 5 9.1 4% ;YB -1和YB -2混合使用 ,最高液相产品收率为 68.76%。     

MATHEMATICAL MODELING OF THROUGH-HOLE-PLATING IN ELECTROCHEMICAL MICROFABRICATION II. AXISYMMETRIC TWO-DIMENSIONAL CONVECTIVE MASS TRANSFER

Axisymmetrical, two dimensional mass transfer in a tube and a through-hole was studied. The elliptic convective-diffusion equation was solved numerically by taking into account both the axial and radial diffusion in the entrance region of an infinite tube. The whole mass-transfer region in a tube of finite length was also studied by dividing the domain into several regions according to different mass-transfer mechanisms. A similar analysis is then conducted for a through-hole geometry by assuming a modified Hagen-Poiseuille fluid pattern. Results show that mass-transfer rate in a through-hole is larger than that in a tube by approximately 10%. This is due primarily to faster fluid flow within the concentration boundary layer in a through-hole.     

焦化柴油不安定因素考察

对焦化柴油的不安定因素进行了研究.通过研究发现,焦化柴油中的酸性物质、碱性物质、微量金属及可见光均是影响焦化柴油安定性的因素,空气对焦化柴油的安定性影响较小.     

塑料充模流动粘性模型研究

对多种塑料在不同温度下的剪切速率一稳态剪切粘度数据进行Cross粘性模型参数拟合，得到了表征材料粘度的模型参数(B，Tb，τ^*，n)。其拟合效果良好，能较准确地描述塑料熔体在一定剪切速率和温度范围内的粘流特性，为工程计算和塑料熔体模流分析提供了数据支持。结果表明，该方法有较广泛的适用性。     

棉籽油间歇式酯交换反应动力学的研究

生物柴油(棉籽油甲酯)可以由棉籽油与甲醇在催化剂KOH存在下通过酯交换反应制得。故对棉籽油间歇式酯交换反应动力学进行了研究,并考察了反应温度和催化剂浓度对产物棉籽油甲酯浓度的影响。用液相色谱法分析棉籽油的组成;用气相色谱法分析产物中棉籽油甲酯的含量。由实验数据绘制的动力学曲线得到酯交换反应在开始阶段为准二级反应,以后紧接转为一级反应和零级反应,与文献报导的棕榈油酯交换反应动力学结果一致。由实验数据求出酯交换反应在开始阶段的动力学参数,35℃、45℃时的反应速率常数分别为0.9179Lmol-1min-1和1.049Lmol-1min-1,酯交换反应的活化能为10.88kJmol-1。根据实验结果得到棉籽油酯交换反应的最佳反应温度为45℃,最佳催化剂为1.1%KOH。