硫酸盐浆厂污水处理工程及单元技术特点

本文简略介绍云南某硫酸盐浆厂污水处理工程采用的国内不多见的污水单元技术，并对其先进性和实用性效果进行评价和探讨。     

油管电热清防蜡技术在强水敏油田的应用

江苏油田的庄 2、韦 2油田属强水敏油田 ,采用热 (水 )洗油井和化学清防蜡效果较差 ,两油田每年因洗井造成地层污染影响的产量损失在 5 0 0 0t以上 ,约占油田产量的 4 5 %。根据集肤效应 ,采用油管电热清蜡技术 ,在含水小于 6 0 %、井斜小于 4 0°的油井上可正常使用 ,一般通电加热 4 0～ 80min后 ,油井井口温度能达到 5 0℃左右 ,最高可达到 6 5℃以上 ,连续加热 5～ 6h即可达到清蜡目的 ,电热清蜡为周期 6 0～ 90d。影响电热清蜡主要指标因素是油井的产液量 ,产液量越小 ,所需要的加热电流和加热电压也越小 ,井口温度达到最高值越低 ,清蜡效果越差。试验的 7口井平均年度投入产出比达到 1∶5 ,经济效益和社会效益十分明显。     

Production of hydrogen over bimetallic Pt–Ni/δ-Al2O3: I. Indirect partial oxidation of propane

Indirect partial oxidation (IPOX) of propane was studied over bimetallic 0.2 wt.% Pt–15 wt.% Ni/δ-Al₂O₃ catalyst in the 623–743 K temperature range. The unreduced and reduced forms of the catalyst were characterized by ESEM–EDAX and X-ray diffraction (XRD). In the IPOX tests, the effects of steam to carbon ratio (S/C), carbon to oxygen ratio (C/O₂) and residence time (W/F (g_cat h/mol HC)) on the hydrogen production activity, selectivity and product distribution were studied in detail. The effect of temperature program applied (increasing from 623 to 743 K, ITP; decreasing from 743 to 623 K, DTP) during reaction was also tested. The results showed that the Pt–Ni bimetallic system has superior performance characteristics compared to the monometallic catalysts reported in literature. The reason is thought to be the utilization of the catalyst particles as micro heat exchangers during IPOX; the heat generated by Pt sites during exothermic total oxidation (TOX) being readily transferred through the catalyst particles acting as micro heat exchangers to the Ni sites, which promote endothermic steam reforming (SR). The optimal conditions were found as S/C = 3, C/O₂ = 2.70 and W/F = 0.51 g_cat h/mol HC for IPOX of propane on the basis of high hydrogen productivity and selectivity between 623 and 748 K for the experimental conditions tested. The thermo-neutral points obtained showed the sustainability of reaction in terms of energy.     

一种新的含水率校正方法

从研究流体流动规律出发,结合模拟井实验结果,建立了多参数、非线性的半理论和半实验含水率校正模型,提出了反映两相滑脱效应的滑动比概念,其计算方法物理意义清晰并具有明确的收敛边界。与模拟井实验结果进行对比,使用平方法降低了含水率校正误差。     

模糊Petri网及知识表示

在建造专家系统中虽然有很多种知识表示方法，但都有不尽人意的地方，本文试图用一种新的方法－Ｐｅｔｒｉ网模型来表示知识。本文给出了Ｆｕｚｚｚｙ Ｐｅｔｒｉ网和广义Ｆｕｚｚｙ Ｐｅｔｒｉ网两种模型，并给出了相应的推理算法，一旦专家知识用Ｐｅｔｒｉ网表示后，根据Ｐｅｔｒｉ网固有的特性，我们就能处理专家系统中并行推理、无回溯推理，反向推理等问题。     

线加权余量法及其在正交异性板弯曲分析中的应用

利用有限差分法对控制方程和边界条件进行半离散化,使其定义在一些离散线上,然后采用加权余量法求解。这就是本文提出的线加权余量法,也可称之为有限差分-加权余量分维耦合法。文中以正交各向异性薄板弯曲平衡问题为例推导了有关具体算式,给出了数值算例,说明了本文方法的有效性。     

Estimation of bacterial production through the coupling of (methyl 3H) Thymidine incorporation and several parameters over a Microcystis aeruginosa bloom in a hypereutrophic reservoir

The coupling of the changes in bacterial quantitative and metabolic aspects during Microcystis aeruginosa bloom conditions together with several environmental parameters was studied in the hypereutrophic Villerest reservoir, France. Bacterial abundance varied from 5.20 to 21.28 × 10⁶ bacteria-mL^?1, while bacterial biomass ranged between 75 and 507 μg C mL^?1. These results confirmed the highly eutrophic status of the Villerest reservoir. The relative quantitative importance of attached bacteria increased as Microcystis proliferated. Methyl-³H incorporation and D-(U-¹⁴C) glucose uptake varied from 8.99 to 60.57 × 10⁶ cells-mL^?1, and 0.016 to 1.587 μg CL^?1 h^?1, respectively. Correlations between several abiotic and biotic parameters showed that phytoplankton regulated bacterial growth by releasing organic carbon which is directly uptaken by heterotrophic bacteria. In the hypolimnion, the sedimentation of decaying algae represented a substantial substrate for bacterial growth.     

米塔尔钢铁集团的全球并购发展战略

概述了米塔尔的并购经过和并购特点,着重探讨了米塔尔的管理模式、人员情况、钢铁厂布局、生产经营、主要战略伙伴、研发机构及其生产、采购与销售策略。系统地分析了米塔尔在中国的发展,指出米塔尔在全球钢铁业整合中处于领先地位,米塔尔来中国投资看中的是中国的原料和市场,且运作步伐明显加快,会对中国钢铁企业构成很大的威胁。     

不同灌溉条件下的水稻需水规律及水分生产率分析

稻田需水量包括植株蒸腾、棵间蒸发、田间渗漏3部分。研究表明，水稻在充分供水条件下所形成的蒸腾量中包含了一部分无效蒸腾，无效蒸腾量的减少不会影响作物的生长发育，反而会有不同程度的增产和优质效应。节水灌溉技术的推广产生了明显的经济与社会效益。结合当地实际情况采用3种常见的灌溉方式探讨了不同灌溉方式下水稻的需水规律、灌概定额和生产率的差异，为水稻节水高效栽培提供理论与技术依据。     

200 万t链箅机-回转窑球团生产线快速达产实践

介绍了邯钢200万t链箅机-回转窑酸性氧化球团生产线的工艺特点和主要设备,以及建成投产后试生产的有关情况。通过周密的部署和安排,该生产线实现了40天快速达产的目标。