智能超表面辅助低轨卫星通信技术综述

卫星通信能够提供超视距、大容量的通信服务,但在城市区域、峡谷森林等视线受遮蔽严重的区域,会出现视距衰落严重、多径效应显著等问题,影响通信质量。近年来出现的智能超表面(RIS)可以通过动态控制反射单元的电磁性质,构建可控电磁环境,为改善低轨(LEO)卫星通信质量提供新的思路。本文基于RIS基本原理与优势,对RIS用于LEO卫星通信中信道建模、信道估计、波束成形等关键技术进行探讨,最后分析了目前RIS在实际应用中面临的主要挑战,以期为LEO卫星场景下的RIS研究提供参考。     

Fluorescence enhancement from plasmonic Au templates

We have fabricated sub-quarter-micron-patterned Au templates with electron beam lithography, and studied their effect on the fluorescence intensity of immobilized, anti-rabbit IgG antibody labeled with AlexaFluor® 546. Varying the geometry of the structured surface, the plasmon resonances are tuned to match the fluorescence wavelengths and achieve significant fluorescence enhancement. Full electrodynamic simulations were used to understand the optical response and access the quality of the fabricated structures for surface plasmon excitation.     

Theoretical calculations of the surface tension of Ag(1−x)-Cu(x) liquid alloys

The surface tension of silver-copper binary liquid alloys is calculated, in the frame work of Eyring theory. The calculations were made for different compositions (mole fraction, x_Cu = 0, 0.2, 0.4, 0.6, 0.8 and 1), in the temperature range 1100-1800 K. The surface tension decreases with temperature increase, at a fixed copper fraction x_Cu, and increases with increasing copper content. The calculated results are appropriately compared with existing literature data.     

摇枕铸钢件麻坑缺陷的消除

生产中发现二氧化碳水玻璃石英砂铸钢件麻坑缺陷与二氧化碳水玻璃石灰石砂铸钢件的麻坑形貌特征相似。试验指出：采用与消除二氧化碳水玻璃石灰石砂铸钢件麻坑缺陷相同的方法如：改性涂料、不上涂料、改良面砂等工艺方法可有效地消除二氧化碳水玻璃石英砂铸钢件的麻坑缺陷。     

Contrast-based evaluation of mar resistance of thermoplastic olefins

The physical aspect of mar behavior is studied by applying a standardized progressive sliding load methodology to smooth and textured automotive-grade thermoplastic olefins. It is shown that surface texture has a strong effect on light scattering and, hence, the propensity for mar visibility. It is also shown that digital imaging via a desktop scanner can be used to quantitatively and objectively assess mar resistance using contrast as a basis. Incorporation of slip agent definitively improves the mar resistance for both types of surfaces. Relationships between contrast, gloss and surface roughness in relation to mar visibility are discussed.     

Consequence-based structural design approach for black swan events

The metaphor of black swan refers to unpredictable events like 9/11, the Indian Ocean tsunami, or the Oklahoma City Federal Building bombing, that cause catastrophic consequences for structural system safety. The likelihood of occurrence for such unforeseen events cannot be estimated from the observed data or prognosticated by experts. The absence of event and likelihood information renders futile the application of usual risk-based methods for design. Therefore, a shift from the probabilistic approach to consequence-based structural design is necessary for coping with the unexpected demands. This is accomplished through the conceptual development of a system capacity oriented design approach, where structural members are designed for variable reliabilities based upon their contribution to causing adverse system consequences. Information about general structural integrity encoded in the stiffness matrix is applied, using member consequence factors ranging from 0 to 1, for determining a member’s contribution towards system response. The structural system is designed using member consequence factors as additional partial factors on the resistance side of the design equations. The consequence-based scheme does not need a triggering hazard event (or its likelihood) and is an apt structural design approach for black swan events.     

TiO2-coated foams as a medium for solar catalysis

Sunlight irradiating the surface of the Earth represents a maximum input available for a solar catalytic process of 50 W_UV m⁻². We propose using high-porosity, metallic, reticulated foams as the support medium for the photocatalyst in order to improve the apparent quantum yield. The layer of TiO₂ was applied by dip-coating. The measurement of the degradation kinetics was carried out on a model target molecule, 2,4 dichlorophenol, at an initial concentration of 10 mg l⁻¹. The aim was to assess the efficiency of the foams as a photocatalytic media compared to that of a suspension of catalytic powder (Degussa P25) and the flat 2D support (Ahlstrom cellulose media). The apparent quantum yield of the foam scaffold carrying the TiO₂ was high, showing that, as with the powder suspension, foam makes good use of the UV rays to break down molecules. It is noteworthy that the apparent quantum yield of the foam tended towards that observed for suspensions which form the ideal support thanks to their optimal ability to harness the light.     

The synthesis of novel fluorine-containing random polymer and application in modification of solid surfaces

The novel fluorine-containing random polymers, poly (2, 3, 4, 5, 6-pentafluorostyrene)-r-poly (4-vinyl benzocyclobutene) random copolymer was synthesized, which can effectively decrease the surface energy and provide a good corrosion protection for some metals. Additionally, textured silicon was fabricated by an optically assisted electrochemical etching process to study the effect of the random copolymer modification on the binary geometric structures of the solid surface. After modification the superhydrophobic property can easily be obtained, which show long-term stability and good superhydrophobicity in corrosive solutions over a wide pH range, including acidic and basic solutions.     

静压PHC管桩施工问题分析与讨论

静压PHC管桩在福建省内广泛采用,本文描述静压PHC管桩在施工中常见的问题及处理方法,并以四季康城为施工实例,介绍其施工技术和质童控制,给相关部门提供参考,提高我国静压PHC管桩的管理水平。