Early detection of ageing in solder joints through laser probe thermal analysis of the peltier effect

We have recently developed an optical contactless method for testing the quality of solder joints during accelerated thermal cycling ageing processes.¹ The method was based upon the measurement of the dynamic thermal behaviour of the joint to short bursts of Joule heating. It has proved to be efficient in revealing the formation of cracks at the lead-solder interface. We present a method to evaluate ageing at a much earlier stage in the cycling process. We have observed in earlier work,¹ that before cracks appear, structural changes occur in the solder at the lead-solder interface. The thermal response of the solder joint is recorded over time to a Peltier heat perturbation produced by flowing a current pulse through the interface where structural changes occur. The key point in this method is to discriminate the Peltier effect from the Joule thermal response because both effects generate heat. The variation of the early Peltier response in the thermal cycling ageing tests is seen as a quantitative signature of the structural changes in the lead-solder interface.     

测定地下水流向的多计数管探头的研制

多计数管流向探头;;单孔;;总流向;;局部流向;;滤水管 掌握地下水的流动方向,有助于研究地下水的运动规律。利用放射性单孔法可以测定地下水流某一点流动方向。 应用放射性指示剂在单孔中测定地下水流向的方法由奥地利的梅尔霍费于1963年首先提出,1964年波兰的鲍劳斯齐克等把这种方法用于现场测量。放射性单孔流向测量方法有若干种,其原理基本相同,仅测量装置结构有区别,早期有单管旋转式探头。我们从1983年7月     

Evaluation of the reactivity of titanium with mould materials during casting

A methodology for evaluating the reactivity of titanium with mould materials during casting has been developed. Microhardness profiles and analysis of oxygen contamination have provided an index for evaluation of the reactivity of titanium. Microhardness profile delineates two distinct regions, one of which is characterised by a low value of hardness which is invariant with distance. The reaction products are uniformly distributed in the metal in this region. The second is characterised by a sharp decrease in microhardness with distance from the metal-mould interface. It represents a diffusion zone for solutes that dissolve into titanium from the mould. The qualitative profiles for contaminants determined by scanning electron probe microanalyser and secondary ion mass spectroscopy in the as-cast titanium were found to be similar to that of microhardness, implying that microhardness can be considered as an index of the contamination resulting from metal-mould reaction.     

国有企业党风廉政建设中的问题及治理研究

剖析国有企业党风廉政建设中的突出问题。提出“推进国有企业党风廉政建设运用市场经济原则经营运作是重要途径;加强对企业经营管理者的监督管理是关键;完善法人治理结构、建立企业内部权力制衡机制是重要基础”的观点。     

影响磁式TIMS测量准确度的主要因素

测量准确度是热电离质谱 ( TIMS)的重要指标 ,对于使用年限较长的 TIMS,造成准确度下降的因素很多 ,分析判断更复杂。为了准确、系统地了解其中的主要原因 ,本文从 TIMS的基本工作原理出发 ,对影响测量准确度的主要因素 ,如离子束的角分散、能量分散、电磁场稳定性、多接收器的形变和位移、电子倍增器的衰老和放大器增益的差异等及相应的解决办法作了较深入的探讨     

基于B点磁探针膛内电枢电弧长度与速度分布测量的计算机控制系统的研究

基于B点磁探针的测量原理，建立了电磁轨道炮膛内三维等离子体电枢电弧长度和电弧运动速度测量的数学模型，通过对该模型的分析给出了用于测量膛内电枢电弧长度和运动速度分布的相应推论。开发了用于测量膛内等离子体电枢电弧长度和速度的多通道计算机控制诊断系统，并进行了相应的试验研究。     

L520型智能中子仪测定农田土壤含水量的标定研究

通过对L520型智能中子仪测定农田土壤含水量的标定研究，在试验区草甸土类型的土壤中，在0～100cm的土层中得到了一条标定土壤含水量的回归直线，用此法测定土壤含水量较重量法快捷方便且误差小。     

小剂量辐照小鼠胸腺细胞膜流动性的变化

报道了以茈为荧光探针,探讨小剂量~(60)Co γ射线照射后小鼠胸腺细胞膜流动性的变化。结果表明,剂量在0.25-1.00Gy范围,胸腺细胞膜流动性降低与剂量之间呈明显线性关系。从0.50Gy起,辐照组荧光强度比值I_1/I_2与I_3/I_2与对照组的比较存有显著差异(P<0.05)。提示淋巴细胞膜流动性的变化可作为小剂量辐照早期效应的敏感指标。     

Structural properties of 0.65Pb(Mg1/3Nb2/3)O3–0.35PbTiO3 relaxor ferroelectric thin films on SrRuO3 conducting oxides

Coating of 0.65Pb(Mg_1/3Nb_2/3)O₃–0.35PbTiO₃ (PMN–PT) relaxor ferroelectrics by a sol–gel method is followed by growth of epitaxial SrRuO₃ (SRO) metallic oxide electrodes on SrTiO₃ (STO) single-crystal substrate by pulsed laser deposition. High-quality PMN–PT films on SRO with preferred growth orientation were successfully fabricated by controlling the operation parameters. Structural properties of relaxor ferroelectric PMN–PT thin films on SRO/STO substrates have been studied by X-ray diffraction (XRD), transmission electron microscopy (TEM) and atomic force microscopy (AFM). In-plane and out-of-plane alignments of the heterostructure are confirmed and the structural twinning of the materials are also revealed.     

扫描探针制备技术的研究现状及发展

探讨了近几年来探针制备技术的发展和趋势,分别就探针检测性能的改进、探针结构、探针检测功能拓展及多通道信息采集组合探针等几方面,对相关制备技术的方法、特点以及相应检测条件、适用环境展开讨论,这些方面反映探针制备技术正朝着尖锐化、多样化、功能化和组合方向发展。