间歇窑窑墙温度场图形仿真研究

本文利用有限差分法求解间歇窑窑墙中的温度分布，并用Ｃ语言设计了窑墙温度场图形仿真软件。输入窑墙厚度和材料的物性参数等，系统可进行窑墙温度场分布的实时仿真及窑炉结构与操作的优化     

Anodic dissolution of spongy titanium in ethanol solution for preparation of nano-sized TiO2 powder

Nano-sized TiO₂ powder was prepared by electrochemical dissolution of spongy titanium in an ethanol solution following direct hydrolysis of the electrolyte solution. Characterization of the electrochemical product revealed that Ti(OEt)₄ was formed by anodic dissolution of spongy titanium in ethanol solution. X-ray diffraction and transmission electron microscope were, respectively, used to investigate the structure of TiO₂. This study showed that nano-sized TiO₂ prepared by this method has a structural and thermal stability with a narrow size distribution of 5-10 nm. The optimum electrochemical operating conditions established were a temperature of 333-343 K, current density of 400 A m⁻² and faradaic efficiency of 86%. Experiments showed that this process might be recommended as a promising technique for synthesis of nano-sized powder.     

集成于无源UHF RFID标签的宽温测范围CMOS温度传感器

针对无源UHF RFID标签温度测量范围小、功耗等问题,本文提出了一种集成于无源UHF RFID标签的宽温测范围CMOS温度传感器。本文设计采用UMC 0.18μm 1P6M CMOS工艺进行设计,提出一种新温度脉冲转换电路结构产生随温度变化的脉冲,从而实现了宽温度测量。仿真结果表明:当温度范围在-75℃~125℃时,温度脉冲宽度变化近220μs,标签芯片供电电压为1.5V时,室温时新增的温度传感器模块功耗仅为200 nW,温度传感器精度为0.45℃/LSB。测试结果:在-5℃~45℃范围内进行测试,温度传感器精度为0.48℃/LSB,其中在室温25℃左右振荡器频率2.087 MHz,脉冲宽度大约110μs,异步计数器显示为011011000。     

陶瓷磨光弧面板的开发与应用

研究了陶瓷板材在各种温度及压力下产生的应力、应变与板材断裂之间的关系和规律,提出了陶瓷板材的弯曲方法,研制各种专用试验、生产设备,将成品陶瓷平板加工成为园柱板、弧面、球面、圆锥面、双曲面等各种曲面板.     

Moisture adsorption characteristics of a thin bed of polycrystalline potash pellets: Part I. Experimental study

This study is an experimental investigation of heat and moisture transfer within a packed bed of polycrystalline, porous potash pellets. Experiments were first performed to determine the moisture uptake characteristics on individual pellets subject to a step-change in relative humidity. Then a bed of pellets was subjected to flows of humid air on the upper boundary and a cold impermeable surface on the lower boundary resulting in a temperature gradient across the bed. Temperature and moisture content were measured within the bed. It was found that moisture uptake is less for potash pellets and they are less likely to cake than granular and standard potash when subjected to the same ambient air conditions. This is due to the porous nature of the pellet and its nearly uniform size and spherical shape.     

裂解气压缩机级间注水技术的应用

介绍了裂解气压缩机由注洗油改为注水情况，进而得出结论：改注水降温效果明显，压缩机工作效能可得到有效保障。     

Unsteady temperature fields of monoliths in catalytic converters

This paper measured unsteady temperature fields of uncoated-monolith and catalytic monolith under real engine operating conditions using thermocouples. A multi-dimensional flow model of the turbulence, heat and mass transfer, and chemical reactions in monoliths was established and numerically solved in the whole flow field of the catalytic converter. The purpose of this paper is to study unsteady warm-up characteristics of the monoliths and to investigate effects of inlet cone structure on temperature distribution of the catalytic converter. Experimental results show that the warm-up behaviors between uncoated-monolith and catalytic monolith are quite different. Simulation results indicate that the established model can qualitatively predict the warm-up characteristics. Increasing the inlet cone angle can improve the light-off characteristics of the catalysts due to high flow velocity and high temperature in the center of the monoliths.     

Rehydration and microstructure of cement paste after heating at temperatures up to 300 °C

This paper is concerned with the evolution of the microstructure of cementitious materials subjected to high temperatures and subsequent resaturation in the particular context of long-term storage of radioactive wastes, where diffusive and convective properties are of primary importance. Experimental results obtained by mercury intrusion porosimetry (MIP) are presented concerning the evolution of the pore network of ordinary portland cement (OPC) paste heated at temperatures varying between 80 and 300 °C. The consequences of heating on the macroscopic properties of cement paste are evaluated by measures of the residual gas permeabilities, elastic moduli and Poisson's ratio, obtained by nondestructive methods. Resaturation by direct water absorption and water vapour sorption are used to estimate the reversibility of dehydration. The results provide some evidence of the self-healing capacity of resaturated cement paste after heating at temperatures up to 300 °C.     

再生剂对再生沥青感温性的影响

通过3种再生剂对老化沥青进行再生实验,用针入度指数和粘温指数对再生沥青感温性进行评价并讨论再生剂的影响规律。实验结果表明,再生沥青在低温和中高温区的感温性均好于原料沥青,其中再生剂C再生的再生沥青感温性较好;3种再生剂对再生沥青中温区的感温性影响无明显规律,再生剂增加了老化沥青的感温性;再生剂A对再生沥青的高温区感温性有所降低,而再生剂B和C则略有增加。结合再生剂组分分析数据得出饱和分能降低沥青的高温区感温性,而芳香分则增加沥青的高温区感温性。     

底部局部辐射加热窑炉内温度场数值模拟

提出了底部局部辐射加窑炉内温度场数值分析的控制方程组，分别对平面加热及半圆柱形加热面两种算例进行了数值计算，得了影响烤花烤窑炉内温度场均匀性的主要因素和有加热面发射率，加热面形状，加热面相对位置及窑炉墙体热阻和墙体与外界的换热热阻。