节理岩体的代表单元集合体模型及弹性参数预测

本文明确提出了节理岩体“代表单元集合体”的概念和模型，通过对节理岩体的“代表单元集合体”进行数值模拟，研究了节理岩体的“代表单元集合体”的变形特性，建立了节理岩体的弹性模型，提出了预测节理岩体宏观等效弹性参数的计算机模拟方法，并将其应用于岩体工程稳定性分析中。     

Hydrolytic stability and protective properties of polyurethane oligomers based on polyester/ether/polyols

The present study deals with effect of the type and chemical character of incorporated polyester/polyether blocks on the hydrolytic stability of crosslinked polyurethane oligomers. Diffusion parameters of the investigated polyurethane oligomers, giving information concerning chemical changes taking place in neutral, basic and acidic aqueous environments, have also been determined.     

从头算法对甲基磺酸拉曼光谱振动频率指认

对液态的甲基磺酸进行了拉曼光谱测定。采取从头算法用各种不同的基组 (最大的基组为MP2 / 6 -311+G( 2d ,2 p) )对甲基磺酸的结构和光谱进行了计算 ,得到了甲基磺酸的结构参数及稳定构象信息。采用一个具有Ci 对称的二聚体模型解释了甲基磺酸的液态光谱。对单体和二聚体的甲基磺酸进行了简正坐标计算 ,结果表明二聚体结构是液态甲基磺酸聚积态分子的合理模型。     

On using peak amplitude and rise time for AE source characterization

Acoustic Emission (AE) signals, which are electrical version of acoustic emissions, are usually analysed using a set of signal parameters. The major objective of signal analysis is to study the characteristics of the sources of emissions. Peak amplitude(P _a ) and rise time(R _t ) are two such parameters used for source characterization. In this paper, we theoretically investigate the efficiency ofP _a andR _t to classify and characterize AE sources by modelling the input stress pulse and transducer. Analytical expressions obtained forP _a andR _t clearly indicate their use and efficiency for source characterization. It is believed that these results may be of use to investigators in areas like control systems and signal processing also     

Continuous formation of slurry ice by cooling water–oil emulsion in a tube

Water-silicone oil emulsion with an additive, (C₂H₅O)₃SiC₃H₆NH₂, was examined as a heat storage material. A spiral tube used as a heat exchanger was immersed in a low temperature bath and the emulsion was circulated in the tube to make ice continuously. Ice was separated from the ice–liquid suspension in an outlet tank. The amount of formed ice, the temperatures of the inlet and the outlet of the heat exchanger, and the temperatures in the tube wall were measured and the overall heat transfer coefficient and the heat flux through the tube were calculated. Experiments were carried out, varying the flow rate, the temperature of cooling brine, and the thickness of tube wall. The condition under which slurry ice was formed continuously without adhesion of ice to the cooling wall was clarified. Though decrease in the thermal resistance of the tube increased the rate of ice formation or raised the brine temperature, it narrowed the range of the flow rate and of the brine temperature in which slurry ice was formed continuously.     

提高储层预测精度技术思路与对策

采用地质、地震、测井人员协同一体化作业，对地下地质目标进行综合预测与评价，可提高储层预测精度，降低预测结果的多解性。主要方法是针对不同的区块，采用不同的方法和对策，首先从单井储层划分对比入手，建立储层沉积模式，同时对地震数据目的层段进行精细解释，建立地层构造模式，用沉积、构造等地质规律来指导和约束反演；利用测井资料对地震资料进行精细标定，建立各井的单井波阻抗模型，建立井数据和地震数据沟通的桥梁；在严格的测井约束、地质模型约束、层位控制下进行储层反演；充分利用地质、地震反演结果、地震参数提取及分析结果、测井、测试和分析化验等资料对储层预测结果进行综合分析与评价。该方法应用于长庆、大庆、准噶尔等实际区块，取得了较好的效果。     

Calorimetric determination of the enthalpy change for the binding of methyl orange to poly(vinylpyrrolidone) in aqueous solution

Thermodynamic parameters have been determined for the interaction of methyl orange and poly(vinylpyrrolidone) in aqueous solutions containing tris, tris and hydrochloric acid, or water only. Enthalpy changes were determined by use of a flow microcalorimeter. Free energy changes were calculated from the results of equilbrium dialysis studies. The results are interpreted in terms of the behaviour of poly(vinylpyrrolidone) in these systems. Analysis of data shows that the hydrophobic interactions in the systems are in the order: tris > wateronly > tris-HC1.     

Mechanical and thermal properties of HVOF sprayed Ni based alloys with carbide

The objective of the present study is to develop multi-functioned coating to the components, which are made of copper with electroplated Ni and are widely used for steel making industry. In this paper, we report the mechanical and thermal properties of Ni based superalloys with carbide sprayed by high velocity oxygen fuel (HVOF), and the detailed effects of sprayed material, spraying conditions, and initial powder structure on these properties. It was found that, among commercial Ni self-fluxing alloys (without fusing treatment), coating with a carbon content of 0.58 mass% had the most preferable properties, with a good balance of the hardness, strength, and thermal shock resistance. The thermal shock resistance depended not only on the strength of the coating but also on the volume contraction when tested at high temperatures. For the several developed Ni based superalloys with carbide, Ni20Cr8Mo5Fe–WC and Ni16Cr15Mo3–WC demonstrated the prominent adhesion strength and thermal shock resistance with high Galvanic corrosion resistance through optimized spraying condition. Also, 20 mass% NiCr–Cr₃C₂ coating sprayed by using employed relatively small primary particle succeeded in achieving the multi-superior properties; high adhesion strength, high corrosion resistance and thermal shock resistance.     

舞钢扁钢锭咬边参数的确定

本文根据我公司自产的11.7t及13.34t扁钢锭在4200mm轧机生产过程中,运用正交试验方法,合理应用咬边参数的轧制方案,以此降低金属消耗。此方案使“咬入返回轧制”及“留尾轧制”新技术进一步得到完善,板形更加矩形,使锭一材成材率提高2％左右。     

铜街子工程坝基预裂控制爆破

本文介绍了在复杂地质条件下,通过反复试验、采用预裂爆破技术在玄武岩坝基进行各种坡面角度的全方位、大面积的生产性实践,并对预裂控制爆破提出了一些意见和具体施工方法.