Effect of temperature on microstructure ofmolybdenum diffusion coating on titanium substrate

The halide-activated pack cementation process was used to form molybdenum diffusion coating on titanium substrate. The morphology, structure, elements diffusion distribution and microhardness of the coatings formed at different diffusion temperatures were studied. The results indicate that the coating is made up of deposition layer and diffusion layer, and the surface roughness of specimens is increased after diffusion. In the diffusion layer, the major phases are Mo and β-Ti phase with addition of α′-Ti phase and α″-Ti phase. And the phase composition of Mo →β→α″→α′ is formed for different Mo contents in the diffusion layer from outside to inside. The diffusion of Ti element is very obvious as well as Mo element. With increasing the diffusion temperature, the thickness of diffusion layer is increased rapidly, and the microhardness is changed more smoothly with diffusion depth, which shows the same distribution rules as the Mo content.     

Mo-Ti体系合金的液相烧结与组织结构

设计了 Fe- Al烧结助剂进行 Mo- Ti体系合金的低温液相烧结 ,详细探讨合金在烧结过程中的组织结构变化以及 Mo- Ti合金的致密化机理。研究表明 ,Fe- Al添加剂对 Mo和 Ti的致密化均有明显的效果。Mo与 Ti在 Fe- Al添加剂的作用下发生了不完全的固溶反应 ,形成的部分 ( β- Ti,Mo)固溶体有效促进了不同组成配比的 Mo- Ti合金的烧结致密化     

PCVD法沉积Ti(CN)涂层及其抗氧化性研究

应用PCVD技术，以金属有机物TPT作钛源在H13模具钢表面沉积Ti(CN)涂层，研究了不同工艺参数对涂层组织和性能的影响，并对涂层的抗氧化性进行了试验。结果表明，采用适当的沉积温度、压力及氮气流量，可以在H13钢表面得到以Ti(CN)为主的致密涂层，在沉积温度500℃时达到最高硬度HV1760，涂层在600℃以下具有良好的抗氧化性。     

溅射涂层对炮钢氧化及热腐蚀行为研究

用磁控溅射的方法在炮钢CrNi3MoVA上沉积NiCrAIY涂层，研究了涂层前后抗氧化及热腐蚀的性能，结果表明，溅射NiCrAIY涂层的炮钢的抗氧化及热腐蚀性能显著提高．     

Characterization of tribo-layers on self-lubricating plasma-assisted chemical-vapor-deposited TiN coatings

Recently, several new solid lubricants and modern lubrication concepts have been developed to achieve lower friction and wear and thus longer lifetime in severe tribological applications. The aim of this study is to characterize tribo-layers formed during ball-on-disc testing on low-friction, Cl-containing TiN coatings deposited by plasma assisted chemical vapor deposition and to clarify their formation mechanism. Characterization of the transfer layers was done by optical microscopy, optical profilometry, Raman spectroscopy, Auger electron spectroscopy and X-ray photoelectron spectroscopy. Differential scanning calorimetry was used to provide information on the chlorine-influenced chemical reactions of the coatings in ambient air. Iron oxide layers of a thickness in the nm-range have been found on low-chlorine containing TiN coatings (<3 at.% Cl) showing friction coefficients of approximately 0.8, whereas on TiN coatings with higher chlorine contents (>3 at.% Cl) rutile layers were preferably formed, resulting in friction coefficients below 0.2. This self-lubrication mechanism can be explained by the in-situ formation of easy-shearable titanium oxides in the contact zone in the presence of humidity and oxygen.     

Microstructure and strength of brazed joints of Ti3Al-base alloy with NiCrSiB

Brazing of Ti₃Al alloys with the filler metal NiCrSiB was carried out at 1273–1373 K for 60–1800 s. The relationship of brazing parameters and shear strength of the joints was discussed, and the optimum brazing parameters were obtained. When products are brazed, the optimum brazing parameters are as follows: brazing temperature is 1323–1373 K, brazing time is 250–300 s. The maximum shear strength of the joint is 240–250 MPa. Three kinds of reaction products were observed to have formed during the brazing of Ti₃Al alloys with the filler metal NiCrSiB, namely, TiAl₃ (TiB₂) intermetallic compounds formed close to the Ti₃Al alloy. TiAl₃+AlNi₂Ti (TiB₂) intermetallic compounds layer formed between TiAl₃ (TiB₂) intermetallic compounds and the filler metal and a Ni[s,s] solid solution formed in the middle of the joint. The interfacial structure of brazed Ti₃Al alloy joints with the filler metal NiCrSiB is Ti₃Al/TiAl₃ (TiB₂)/TiAl₃+AlNi₂Ti (TiB₂)/Ni[s,s] solid solution/TiAl₃+AlNi₂Ti (TiB₂)/TiAl₃ (TiB₂)/Ti₃Al, and this structure will not change with brazing time once it forms. The formation of over many intermetallic compounds TiAl₃+AlNi₂Ti (TiB₂) results in embrittlement of the joint and poor joint properties. The thickness of TiAl₃+AlNi₂Ti (TiB₂) intermetallic compounds increases with brazing time according to a parabolic law. The activation energy Q and the growth velocity K₀ of the reaction layer TiAl₃+AlNi₂Ti (TiB₂) in the brazed joints of Ti₃Al alloys with the filler metal NiCrSiB are 349 kJ/mol and 24.02 mm²/s, respectively, and the growth formula was y²=24.04exp(−41977.39/T)t. Careful control of the growth of the reaction layer TiAl₃+AlNi₂Ti (TiB₂) can influence the final joint strength.     

High-Temperature Strength of Niobium Alloy 5VMTs with a Silicide-Ceramic Coating. Part 1. Short-Term Strength Characteristics

Experimental data on the short-term strength and plasticity of niobium alloy 5VMTs of the system Nb–W–Mo–Zr in its initial state, after annealing, and with a silicide-ceramic protective coating obtained by testing in vacuum, an inert atmosphere, and in air in the temperature range from 290 to 2270 K are analyzed. The process of microcrack initiation and propagation in the protective coating and matrix is investigated in high-temperature static tension. The limiting plastic strain values have been established at which the composite retains its load-carrying capacity in high- temperature aggressive and oxidizing gas atmospheres.     

The Effect of the Thickness of Fe2 Al5 Phase Layer at Fe/Al Interface on the Mechanics Behavior of Hot Dip Aluminizing Coating

Hot Dip Aluminized Coatings with different thickness were prepared on Q235 steel in aluminum solutions with different temperature for certain time. Through tensile tests and in-situ SEM observations, the effect of the coating's microstructure on the tensile strength of the samples was studied. It was disclosed at certain aluminum solution temperature,transaction layers mainly composed of Fe2 Al5 phase got thicker with time prolonging, and this changed initial crack's extending direction from parallel with to vertical with stretching direction. The change in crack direction decreased tensile strength of samples, thus made the coating easy to break. It was concluded that the existence of thick Fe2 Al5 phase layer was the basic reason for the lowering of tensile strength of the coating.     

The Study of Low Surface Energy Fluorocarbon Coatings with Fluor Content Being Lower

A kind of low surface energy fluorocarbon coatings from the synthesized fluoro-acrylic resin was developed.The molecule orientation principle of nonpolar and polar functional groups in the coatings was analyzed. The contact angles of pure water drops on the surfaces of various fluoro-monomer homopolymers and interpolymers were measured. The relation of coatings' fluoro-content with the surface energy was determined. The distribution of fluoric functional groups in the coatings was investigated. The test results show that though the total content of fluor of the fluorocarbon coatings is relative few, their surface energy is really low due to the enrichment of fluoro-chains on the surfaces.     

电站油罐的防腐维护技术

介绍了油罐防腐施工中采用的新技术和新材料，这些先进的防腐工艺和手段有效地保护了油罐，预防了因腐蚀而产生的泄漏事故。