磷酸异戊酯萃取U,Np,Pu性能的研究

测定磷酸异戊酯（ＴｉＡＰ）对Ｕ（Ⅵ）、Ｎｐ（Ⅳ）、Ｎｐ（Ⅴ）、Ｎｐ（Ⅵ）、Ｐｕ（Ⅳ）和Ｐｕ（Ⅲ）的萃取性能及对Ｔｈ（代替Ｐｕ）的萃取容量。研究了二乙三胺五乙酸（ＤＴＰＡ）络合剂对上述核素形成配合物的条件。结果表明，在用ＴＢＰ和ＴｉＡＰ作萃取剂时，可用ＤＴＰＡ络合Ｎｐ（Ⅵ）、Ｐｕ（Ⅲ）．从而改善乏燃料后处理中Ｕ产品对Ｎｐ、Ｐｕ和Ｐｕ产品对Ｎｐ的去污。     

未知钍—铀比的误差分析

研究了在任意Th、U含量和Th-U比覆盖整个范围(即0≤Th/U≤∝)时总α计数率对年剂量的转换因子及其误差。结果表明,当不测定Th-U比而只测量总α计数率时,最终引起的年龄误差对0≤Th/U≤∝来说为±5.1％-±8.3％,对1.1≤Th/U≤9.5来说只有±2.5％％-±4.1％。     

基于MSP430的低功耗近距无线图像传输系统设计与实现

近距无线图像传输系统主要用于无线传感器网络中的图像采集、传输、处理和显示,本文设计并实现了一种具有较强实用性的近距无线图像传输系统。采用OV7670图像传感器作为图像数据采集器,高速低功耗的nRF24L01射频模块作为无线收发器,采用MSP430F14916位超低功耗单片机作为微处理器,所构成的系统具有功耗低、图像传输速度快等优点。作者详细阐述了该系统的硬件结构和软件设计。     

Effect of alloying on stability of grain boundary in γ phase of the U–Mo and U–Nb systems

U–Mo and U–Nb alloys are both extensively used in nuclear industry. γ phase in U–Mo or U–Nb alloy is a solid solution, being metastable in low temperature region. In this work, the effect of alloying on stability of grain boundary in meta-stable γ phase in U–Mo and U–Nb alloys are investigate through first-principles calculations. At first, crystal structure and elastic constants of Mo, Nb and γ-U metals are calculated and the obtain results show the mechanical unstable nature of γ phase at 0 K, no matter with GGA or GGA + U treatment, which agrees with most of the theoretical results in the literature. Furthermore, from the calculated symmetric tilt grain boundary (STGB) formation energies of Σ3[110]/(111) and Σ5[001]/(310) in Mo, Nb, and γ-U, it is found that due to the mechanical unstable character of the γ-U phase, negative GB formation energy is predicted at 0 K for Σ5[001]/(310) if the STGB model is relaxed with all degrees of freedom. Therefore, by using special quasirandom structure (SQS) method, Σ5[001]/(310) and Σ3[110]/(111) STGBs with different solute concentrations in U-rich side in U–Mo and U–Nb systems are further investigated. It is found that, when alloying with Mo or Nb, unlike Σ3[110]/(111), although the fixed-atom constraint is applied, the GB formation energy of Σ5[001]/(310) STGB is becoming negative when the solute concentration is in U-rich side. Only when the concentration of Mo or Nb is larger than 27 at.% or 30 at.%, respectively, or sufficient small, the GB formation energy is becoming positive, suggesting a cooperative effects of solute concentration, unstable character, and grain size on GB structures in γ phase. The predicted different stability of alloyed GB structures at 0 K suggest that although γ phase is metastable at low temperature, its metastability can be controlled through alloying with different solutes, or with different GBs. And grain refinement should be relatively easy in U-rich part than U-poor part of the U–Mo and U–Nb systems.     

基于U boot构建嵌入式Linux的Bootloader*

介绍Uboot功能和特点,并以ARM9板MagicArm2410和嵌入式Linux为背景,探讨Uboot的移植方法与要点。     

Stress relaxation behavior of Ti-6Al-4V alloy

1　INTRODUCTIONTi 6Al 4VisoneofthemostimportantTial loys[1,2 ] .Butthisalloyhasbadformabilityforitshighelasticresilience .Therefore ,hotsizingisimpor tant[36 ] .Asthebaseofhotsizing ,thestudyofstressrelaxationhasimportanttheoreticalvalueandpracticalsignificance .Ontheotherhand ,Ti 6Al 4Visusedasfastenermaterialssometimes .Whenthefastenersworkatthetemperaturehigherthanroomtemperature ,stressrelaxationmayresultsinacci dents .Sohowtopreventthestressrelaxationisveryimportant[7] .Uptonow ,…     

3Cr2W8V钢锻件表面裂纹的成因及预防措施

通过对难变形钢3Cr2W8V进行实验,证明了合理地选择锻造工艺参数,也是解决表面裂纹的重要途径之一。     

Study On the Tribological Behavior of the Arc-added Glow Discharge Plasma Non-hydrogen Carburization On Titanium Alloy Surfaces

This paper introduces a new titanium alloys surface strengthening treatment by using the arc-added glow discharge plasmas non-hydrogen carburization technique. High purity and high strength graphite is selected as cooling cathode arc source for supplying carbon atoms and particle, which migrate to the titanium alloy(Ti6Al4V) surface and form modified layer. Thus, the hydrogen embrittlement is avoided while the tfibological behavior of the titanium alloy surface is improved in the respects of anti-friction and anti-wear ability.The tribological behavior of the modified layer under dry sliding against SAE52100 steel was evaluated on a ball-on-disc test rig. The results showed that the modified layer obtained a thickness of 30μm at 980℃, 30minutes. The microhardness of the Ti6Al4V alloy surface attained 936 HV, which was much larger than that of the Ti6AI4V alloy. The Ti6AI4V alloy was characterized by adhesion wear and scuffing under dry sliding against the steel, while the surface modified layer experienced much abated adhesion wear and scuffing under the same testing condition. This could be attributed to the carbon dement with different modalities exists in the modified layer.The modified layer showed good friction-reducing and fair anti-wear ability in dry sliding against the steel. Using the SEM,XRD and XPS, the phase structure and morphology of the carburization modified layer was analyzed.     

U形件弯曲影响回弹因素模拟分析

板材在弯曲过程中存在的最突出的问题是弯曲回弹难以精确控制.弯曲卸载后产生的回弹,使弯曲件的形状和尺寸与模具工作部分的形状和尺寸不符.弯曲件的最后形状与整个变形过程有关,模具几何参数、材料性能参数等都会对回弹产生很大影响.在板材弯曲成形智能化控制系统中,准确确定实时识别和预测模型的输入、输出参数是弯曲智能化控制的成功与否以及回弹控制精度高低的关键.本文采用Ls-dyna软件,对U形件弯曲影响回弹的因素进行了分析,得出了影响回弹规律的主要因素.为U形件弯曲智能化控制神经网络参数识别及预测模型输入、输出参数的选择提供依据.     

一种检测电火花加工间隙状态的柔性方法

介绍了一种在数控电火花加工脉冲电源中实现间隙状态检测的柔性方法，具有阈值设置柔性、状态识别准确的特点，巧妙地用一个稳压二极管的钳位作用提高了间隙状态识别的精度，非常适合需经常改变加工参数的加工实验使用。