Straightforward modeling of dynamic I–V characteristics for microwave FETs

This work presents a straightforward approach aimed at modeling the dynamic I–V characteristics of microwave active solid‐state devices. The drain‐source current generator represents the most significant source of nonlinearity in a transistor and, therefore, its correct modeling is fundamental to predict accurately the current and voltage waveforms under large‐signal operation. The proposed approach relies on using a small set of low‐frequency time‐domain waveform measurements combined with numerical optimization‐based estimation of the nonlinear model parameters. The procedure is applied to a gallium nitride HEMT and silicon FinFET. The effectiveness of the modeling procedure in terms of prediction accuracy and generalization capability is demonstrated by validation of the extracted models under operating conditions different than the ones used for the parameters estimation. Good agreement between measurements and model simulations is achieved for both technologies and in both low‐ and high‐frequency range. © 2013 Wiley Periodicals, Inc. Int J RF and Microwave CAE 24:109–116, 2014.     

A comprehensive approach to evaluating watershed models for predicting river flow regimes critical to downstream ecosystem services

Selection of strategies that help reduce riverine inputs requires numerical models that accurately quantify hydrologic processes. While numerous models exist, information on how to evaluate and select the most robust models is limited. Toward this end, we developed a comprehensive approach that helps evaluate watershed models in their ability to simulate flow regimes critical to downstream ecosystem services. We demonstrated the method using the Soil and Water Assessment Tool (SWAT), the Hydrological Simulation Program–FORTRAN (HSPF) model, and Distributed Large Basin Runoff Model (DLBRM) applied to the Maumee River Basin (USA). The approach helped in identifying that each model simulated flows within acceptable ranges. However, each was limited in its ability to simulate flows triggered by extreme weather events, owing to algorithms not being optimized for such events and mismatched physiographic watershed conditions. Ultimately, we found HSPF to best predict river flow, whereas SWAT offered the most flexibility for evaluating agricultural management practices.     

软件测试模型的探讨

软件测试是软件工程的一个阶段,也是保障软件质量必不可少的重要一环。软件测试模型是软件测试的工作框架,用于指导软件测试过程。本文在深入研究各种综合测试技术的基础上,通过对比分析各种主流的测试模型,提出了一种新的软件测试模型,包括静态测试、动态测试,测试评估等活动,把这些活动嵌入到软件开发的整个生命周期,能更好地规划软件开发和测试等一系列活动,提高了软件生产效率及其质量,该模型还适合于迭代开发。     

氮化硅陶瓷高温摩擦学性能

本文研究热压氮化硅陶瓷与３Ｃｒ２Ｗ８Ｖ钢组成的销－盘摩擦副，在空气中非润滑条件下，４００～８００℃不同载荷（４９～３４３Ｎ）的摩擦磨损性能；测定了磨擦系数和Ｓｉ３Ｎ４销的磨损因子；通过对Ｓｉ３Ｎ４磨损面的ＳＥＭ形貌观察、Ｘ射线相结构分析，探讨了陶瓷销的磨损机理     

钛合金的粘接件的湿热耐久性研究

采用拉伸剪切强度试验和楔子试验研究了钛合金TI— 6A1— 4V/改性环氧接头在湿热条件下的耐久性 ,考察了环氧胶固化条件、表面处理方法对胶接接头耐久性的影响 ,由此得出最佳条件以得到相当好的接头耐久性     

Heterogeneous photocatalytic reduction of Fe(VI) in UV-irradiated titania suspensions: effect of ammonia

Results of the heterogeneous photocatalytic reduction of Fe(VI) in UV-irradiated TiO₂ suspensions in the presence of ammonia are presented. The initial rate of Fe(VI) reduction, R, may be expressed as R = k _Fe(VI)[Fe(VI)]^1.25 where k _Fe(VI) = a[Ammonia]+b), a = 6.0 × 10³ μm ^0.25 s and b = 4.1 × 10⁶ μm ^−1.25s⁻¹. The rate constant, k _Fe(VI), increases with the ammonia concentration. The photocatalytic oxidation of ammonia is enhanced in the presence of Fe(VI). A mechanism involving Fe(V) as a reactive intermediate is presented which explains the faster photocatalytic oxidation of ammonia in the presence of Fe(VI).     

Preparation and Kinetic Considerations for the Dissolution of Cr‐substituted Iron Oxides in Reductive‐complexing Formulations

The dissolution rate coefficients of Cr‐substituted (0‐20 at.% Cr) iron oxides viz. hematite and magnetite were determined by using an inverse cubic rate (ICR) law applicable for spherical particles as well as by a general kinetic equation (GKE) applicable for polydispersed particles. An attempt is made to compare both the treatments for different kinds of dissolution profiles obtained by employing oxides with narrow particle size distribution in V(II)‐EDTA and citric acid‐EDTA‐ascorbic acid formulations at 353±5K. The dissolution profiles could be classified into three types based on the nature of oxide and formulations. It is observed that both ICR and GKE treat the dissolution course as a function of decrease in fraction of undissolved mass, m/m₀. The dissolution rate coefficients determined by ICR and GKE have shown the similar trend of decrease with increasing Cr content of the oxides and was ascribed to lattice stabilization.     

基于RFID技术的身份码发射器的硬件设计

针对井下人员定位系统中身份码发射器的实际情况,选择通信射频芯片cc1000及主控制器ATmega88V作为硬件设计的主体,并提出了一种基于RFID技术的身份码发射器的硬件设计方案.为井下人员定位系统的整体设计提供了一种设计参考.     

A new process of extracting vanadium from stone coal

A new process of extracting vanadium from the stone coal vanadium ore in Fangshankou, Dtmhuang area of Gansu Province, China was introduced. Various leaching experiments were carried out, and the results show that the vanadium ore in Fangshankou is difficult to process due to its high consumption of acid and the high leaching rate of impurities. However, the leaching rate can be up to 80% and the content of V2O5 in the residue can be between 0.22%-0.25% in the process of ore fine grinding→oxidation roasting→mixing and ripen-ing→aqueous leaching→P2O4 solvent extraction→sulfiuie acid stripping→oxidation and precipitation→decomposition by heat. Also, the quality of flaky V2O5 produced by this process can meet the requirements of GB3283-87. The total leaching rate of vanadium is 70%. Also, three types of wastes are easy to treat. The vanadium extraction process is better in relation to the aspect of environmental protection than the sodium method.