GPU‐assisted real‐time coupling of blood flow and vessel wall

The vessel wall and the blood flow interact and influence each other, and real‐time coupling between them is of great importance to the virtual surgery as well as the research and diagnosis of vascular disease. On the basis of smoothed particle hydrodynamics (SPH), we present a new approach to solve non‐Newtonian viscous force of blood and a parallel mixed particles‐based coupling method for blood flow and vessel wall. Meanwhile, we also design a proxy particle‐based vessel wall force visualization method. Our method is as follows. Firstly, we solve the non‐Newtonian viscous forces of blood through the SPH method to discretize the Casson equation. Secondly, in each time step, we combine blood particles and sampling proxy particles on the blood vessel wall to form mixed particles and calculate the interaction forces through the SPH method between every pair of the neighboring mixed particles inside the graphics processing unit. Thirdly, the forces of the proxy particles will be mapped to the color display of the proxy particle. Experimental results demonstrate that our method is able to implement real‐time sizeable coupling of blood flow and vessel wall while mainly ensuring physical authenticity and it can also provide real‐time and obvious information about vessel wall force distribution. Copyright © 2015 John Wiley & Sons, Ltd.     

Homochirality of Organic Matter – Objective Law or Curious Incident?

Of the many hypotheses on the origin of biological homochirality on the Earth, the combination of the notion of subatomic particles composing a homochiral pool of primary matter, on the one hand, with the suggestion of the synthesis of chiral organic molecules in the plasma torch generated by super-high-velocity impacts (SHVI) of meteorites, on the other hand, was chosen as the working assumption.     

填充银纳米线各向同性导电胶的性能

以Ti (OC₄H₉)₄ 水解形成的溶胶体系为模板, 以AgNO₃ 为银纳米线的前驱体, 低温下合成长径比为50～60 的银纳米线, 采用TEM 和XRD 对所制得的银纳米线进行表征。以银纳米线作为导电胶的导电填料, 成功制备了一种高电导率的各向同性导电胶。导电胶的电学性能和力学性能测试表明: 这种导电胶在导电填料含量为56 wt %时的电导率比填充75 wt %微米银粒子的导电胶高约6 倍(体积电阻率为1. 2 ×10-4Ω·cm) 。由于填料含量的降低, 该导电胶的抗剪切强度(以Al 为基板时的抗剪切强度为17. 6 MPa) 相比于填充75 wt %微米银粒子和75 wt %纳米银粒子导电胶均有不同程度的提高。      

纳米态电极催化材料Au-Pt/半胱氨酸/Au电极的制备及性能研究

利用自组装技术制备了纳米态Au-Pt/半胱氨酸/Au电极,TEM、ED、XPS等研究表明双金属纳米粒子为Au合金,粒子的平均粒径＜10nm;通过组装时间可以控制双金属纳米颗粒组装的数量.对组装电极的电化学性能进行了测试,通过SEM对其表面结构进行了表征.结果表明,利用自组装方法可以制备纳米态Au-Pt/半胱氨酸/Au电极,该电极具有良好的电催化性能.     

空气过滤捕集效率影响因素分析及多元关联式的确定

评价空气过滤捕集效率对于提高空气品质及优化过滤运行是非常重要的,但目前过滤捕集效率的计算公式均为隐函数,不便于实际应用,因此,本文采用过滤理论对各种过滤影响因素进行理论计算,然后,采用多元回归分析方法,得出计算过滤捕集效率的显性计算公式,并提出了计算多分散颗粒捕集效率的计算方法,以便于优化选择过滤介质及优化过滤运行参数。     

基于微粒群算法的单阶段投资组合优化

投资组合优化问题是NP难解问题,通常方法很难达到全局最优,文章对微粒群算法在投资组合优化中的具体应用进行了研究,在具体应用过程中为了提高算法的收敛性和稳定性对算法进行了改进,通过多次具体的真实历史数据的验证和试验结果分析。结果表明在解决单阶段投资组合优化问题中,微粒群算法是一种高效的、可靠的优化算法,具有一定的实用价值。     

基于FIB-SEM制备尖晶石微米颗粒的球差校正透射电镜样品

针对尖晶石微米颗粒材料,利用聚焦离子束扫描电镜双束系统(FIB-SEM),在传统透射电镜样品制备方法的基础上进行技术性改进,成功制备了高质量的球差校正透射电镜样品.并利用球差校正透射电镜成功观察到了尖晶石颗粒的截面原子结构,为更深入地研究尖晶石材料的结构和性能奠定了基础.     

Investigation of ion fishbone stability on HL-2A using NIMROD

Numerical calculations of resistive internal kink mode with effects of energetic particles (EPs) on HL-2A have been performed using the hybrid kinetic-MHD model inplemented in the NIMROD code. The m/n=1/1 resistive internal kink mode is unstable in MHD limit. However, with kinetic effects of energetic ions, a fishbone mode is excited with mode frequency around 10 kHz. We calculate the impact of resistivity on the growth rate and frequency of ion fishbone mode, and the results are in good agreement with the analytic solutions, which are obtained by solving the fishbone dispertion relation including resistivity effect. The effects of β_frac and cut off velocity of EP on fishbone mode are calculated in detail, where β_frac is the ratio of EP pressure to background plasma pressure. This work presents a clear explanation of the stabilizing effect of ECRH on ion fishbone, which is first observed on HL-2A.     

轧制工艺对VN微合金化厚钢板截面不均匀性的影响

在厚板轧制过程中,由于板厚所引起的由表面到心部变形不均匀,将导致组织与力学性能沿厚度方向上有较大差异,最终影响钢板的整体质量.因此合理选择控轧工艺对于厚板生产至关重要.该研究采用有限元方式模拟了50 mm厚板的轧制过程,得出了不同轧制条件下的厚板截面不同位置的变形情况.同时结合Gleeble热模拟实验,研究了不同控轧工艺对VN微合金化50 mm厚钢板截面效应的影响.结果表明,对于VN微合金化厚板,870 ℃终轧并保温可得到最佳的截面均匀性.