道路与匝道中线自动绘制的算法与实现

道路与立交匝道平面中线的计算机自动绘制是道路路线CAD软件的核心功能之一,在道路工程计算机动态交互式设计、计算机辅助成图方面具有基础性作用.依据道路中线线形的曲率变化特点,推导了道路中线坐标计算的通用数学模型,并根据一个工程实例在通用图形系统AutoCAD环境下实现了道路与匝道中线的自动绘制.     

市县HFC系统如何选择和使用光端机

对有线电视工程设计中如何选用优质设备、提高网络质量等问题进行探讨     

Extremes of random fields over arbitrary domains with application to concrete rupture stresses

To find the exact probability distribution of the global maximum or minimum of a random field within a bounded domain is a pending problem even for Gaussian fields. Except for very special examples of fields, recourse must be taken to approximate reasoning or asymptotic considerations to be judged with respect to accuracy by simulations. In this paper, the problem is addressed through a functional equation that leads to the definition of a class of distribution functions that depend solely on process or field characteristics and domain quantities that can be calculated explicitly. This distribution function class is studied for Gaussian processes in earlier works by the author and it has been obtained explicitly for Gaussian fields on rectangular domains in the plane. Simulation studies show that rather good predictions are obtained for sufficiently smooth wide band Gaussian processes and fields. In this paper, the distribution function is obtained in general for Gaussian fields over arbitrary bounded domains with piecewise continuous and differentiable boundaries, and as in earlier works the distribution function is tested against empirical distribution functions obtained by simulation of sample functions of a smooth approximately Gaussian field, herein called a broken line Hino field. For completeness this particular field type is defined in appendix a and appendix b. The paper concludes with a statistical application on data for plain concrete tensile strength.     

一个基于优化的有限元模型修正方法

本文提供了一个基于一阶搜索优化的有限元模型修正方法。它只需利用结构模态试验的部分固有频率，就能获得较精确的有限元模型。文中附有某无人机上垂尾有限元模型修正的实例。根据上垂尾前二阶试验的固有频率，采用本文方法，对有限元模型进行了修正。修正后有限元模型的前二阶固有频率与试验值的相对误差在2．35％以内，而第三阶固有频率与试验值的相对误差仅为5．81％。它不仅大大地缩小了用修正前有限元模型算得的固有频率与试验值的相对误差，而且还能较精确地预测无试验结果的高阶固有频率值。     

The influence of silicon on carbon redistribution in steel weldments

Carbon redistribution was measured in ST1/ST2 Fe-2.5Si-0.8C/Fe-0.32Si-0.49C steel weldments in the temperature range 500–1000 °C. At the temperatures where austenite exists, carbon diffuses from ST1 into ST2; when ferrite is present, the diffusion flow reverses from ST2 into ST1. This effect is attributed to the degree of the silicon influence on the graphite precipitation and carbon activity in ST1 and ST2 steels. The opposite signs of the activity gradients in austenite and ferrite cause the reversal of the carbon diffusion when the annealing temperature is changed from the austenite to the ferrite temperature region. The carbon diffusion coefficients D_C and the thermodynamic interaction coefficients ε_C^Si in austenite have been assessed from the experimental data for ST1 and ST2 steels.     

气象图数据的提取与转换

对气象图中等值线数据的提取与转化问题进行了研究 ,其中包括图像的二值化、细化、矢量化以及提取数据的转换和还原。它为从已有的气象图像资料中获得数据资料提供了一条有效的途径     

沉降路段供水管线穿越障碍方法探讨

结合工程实际 ,对市政沉降路段上的给水压力管线 ,如何穿越障碍 ,减少不均匀沉降提出了具体的措施及相应建议     

声表面波32位MSK抽头延迟线

介绍了扩频通信有效的ＭＳＫ信号特点及声表面波ＭＳＫ抽头延迟线构成方式，给出了声表面波３２位ＭＳＫ抽头延迟线的实验结果。     

核孔膜生产线膜微孔制备工艺实验研究

本文介绍核孔膜生产线,重点描述了膜微孔制备工艺的实验研究。对于PC和PES膜,已得到32种工况下的扩孔公式,其形式为D=A+Bt,其中D——孔径,t——扩孔时间,A,B为特定工艺参数下的常数值.通过实验。得到了膜孔密度N与300~#核反应堆功率P、热柱辐照位置L的经验公式,即N=6.97×10~5×10~3×101~(1.18L).在本生产线上可生产最大幅面为3 140mm×240mm,孔径为0.04～10 μm的多系列多规格的核孔膜产品。     

冷轧厂酸洗机组3号横剪大流量中高压液压系统设计方案探讨

在宝钢２０３０ｍｍ冷轧厂酸洗机组中，为了满足厚规格ＩＦ钢的生产，拟将原有的气动式剪切机改成液压式剪切机。为此，设计了一套中高压大流量的液压系统以满足３号横剪大剪切力（最高达７００ｋＮ）和快速剪切（３秒／次）的需要。由于采用了蓄能器增速回路和二通插装阀控制技术，使该液压系统较传统的剪切机液压系统具有响应速度快、体积小、重量轻、发热少和降低电机能耗等优点。