一次性使用无菌注射器用橡胶活塞的化学分析方法的改进

介绍一次性使用无菌注射器用橡胶塞的化学分析方法。在适宜的酸度条件下，用碘量法测定易氧化物；重金属含量通常是测其硫化物的含量来判定的，本方法是采用硫代乙酰胶试剂作沉淀剂；锌离子能与亚铁氰化钾溶液及应生成白色络合物沉淀，因此采用亚铁氰化钾比浊法测其锌含量；利用硫氰酸铵比色法测其铁含量。本方法操作具体，比色明显、定量明确，对试样的测定得到了满意的结果。     

化学镀镍复合配位剂的研究

采用对比试验和正交试验,以镀速、孔隙率、镀液稳定性和镀层硬度为评价指标,研究了单一配位剂及复合配位剂对镀液和镀层性能的影响,得到了复合配位剂的最优组合:8.4g/L乳酸,6g/L苹果酸,9g/L柠檬酸,8g/L丁二酸,1g/L丙酸。采用该复合配位剂的工艺配方可提高镀液使用寿命,获得性能优良的镀层。     

Initial Deposition of Colloidal Particles on a Rough Nanofiltration Membrane

The initial rate of colloid deposition onto semi‐permeable membranes is largely controlled by the coupled influence of permeation drag and particle‐membrane colloidal interactions. Recent studies show that the particle‐membrane interactions are subject to immense local variations due to the inherent morphological heterogeneity (roughness) of reverse osmosis (RO) and nanofiltration (NF) membranes. This experimental investigation reports the effect of membrane roughness on the initial deposition of polystyrene latex particles on a rough NF membrane during cross flow membrane filtration under different operating pressures and solution chemistries. Atomic force microscopy was used to characterize the roughness of the membrane and observe the structure of particle deposits. At the initial stages of fouling, the AFM images show that more particles preferentially accumulate near the “peaks” than in the “valleys” of the rough NF membrane surface.     

Anodic behaviour of zinc in methanol solutions of lithium perchlorate

Anodic dissolution of poly- and single-crystals of zinc was performed in methanol solution of lithium perchlorate by means of cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The mechanism of anodic dissolution of zinc in organic solvents occurs in two oxidation steps. It is the first step that surface anodic product is created. Stability of the surface product is much better in anhydrous organic environments than in aqueous media; because the product is stable, a barrier layer composed of is formed at low anodic overvoltage. The formation of the layer is much stronger on the low index than on the high-index plane (0 0 0 1), where the adsorption of anodic product is more difficult.     

内蒙古花敖包特银铅锌矿床成矿特征研究与物化探勘查进展

花敖包特铅锌银矿床是近年来新发现的位于大兴安岭南段西坡银多金属成矿带上一重要矿床。自2000年通过土壤地球化学测量与激电测量发现本矿床以来,相继对该矿床进行了一系列地质基础理论研究以及有效勘查,包括通过各种地质方法揭示矿体成矿规律、探查矿体控制要素,运用物探勘查技术（高精度磁测、瞬变电磁法以及激电测量等）、化探勘查技术（土壤地球化学测量以及深穿透地球化学技术等）以及三维地质建模技术对矿区深部及其外围进行勘查,取得了一些新的认识,通过这些勘查研究显示本矿床在深部和外围仍具有良好的成矿前景。     

模具沉积层应变的模拟

为分析沉积层应变的变化情况,并找出温度与形变的变化规律,采用有限元分析软件ANSYS计算并绘制不同时刻以及不同位置沉积层内的温度及应力应变曲线,在建立传热模型过程中考虑了金属液滴向沉积层的传热以及沉积层向系统外的热量散失等问题．采用在厚度方向以微小层逐层叠加来模拟涂层的增厚,并以此为基础构造沉积层有限元计算模型,应用单元生与死逐层激活层单元参与计算过程．实现移动边界以充分模拟真实的喷涂沉积过程．通过分析不同时刻以及不同位置沉积层内的应力应变曲线,获得了沉积层应力应变变化规律．结果表明,沉积层内存在残余塑性应变,且沉积层与母模接触部位等效应力最大,是最易翘曲的地方,验证了沉积层失稳的一般形式．     

Reserve estimation of an open pit mine under price uncertainty by real option approach

Reserve estimation is a key to find the correct NPV in a mining project. The most important factor in reserve estimation is the metal price. Metal price fluctuations in recent years were exaggerated, and imposed a high degree of uncertainty to the re-serve estimation, and in consequence to the whole mine planning procedure. Real option approach is an efficient method of deci-sion making in the uncertain conditions. This approach has been used for evaluation of defined natural resources projects until now. This study considering the metal price uncertainty used real option approach to prepare a methodology for reserve estimation in open pit mines. This study was done on a copper cylindrical deposit, but the achieved methodology can be adjusted for all kinds of deposits. This methodology was comprehensively described through the examples in such a manner that can be used by the mine planners.     

江西浒坑钨矿含矿韧性剪切带及其^40Ar-^39Ar年代学约束

江西省浒坑钨矿是一个大型石英脉黑钨矿矿床,含矿石英脉除了块状石英脉以外,还大量发育条带状石英脉。本文针对条带状石英脉进行了专门研究,认为条带状石英脉实质上是韧性剪切带,以透入性发育的剪切面理和拉伸线理、剪切透镜体、剪切分异条带普遍发育为特色。剪切带岩石以石英质糜棱岩为主,具有丰富的塑性变形显微构造特征。显微剪切指向构造统计表明,东西向和北西向脉组的运动方式均以左旋正滑为主,近水平脉组则以正滑为主。北西向韧性剪切带的新生绢云母^40Ar-^39Ar坪年龄为140．3±1．0Ma,相应的等时线年龄为139．6±2．4Ma;而东西向韧性剪切带绢云母^40Ar-^39Ar坪年龄则比较复杂,高温阶段年龄可能受到成矿期白云母残斑的影响,中温阶段的表观年龄和总气体年龄更接近前一样品的坪年龄。据此认为韧性剪切变形的年龄为140Ma左右,韧性变形发生在成岩和成矿之后。条带状石英脉系块状石英脉韧性剪切改造而成,推测其形成主要与晚期补充岩体的斜向上侵作用有关,但更为合理的模式需要更多资料的进一步证实。     

广西老堡铅锌矿褶皱形成机制及其控矿规律

老堡铅锌矿床主要赋存在陡山沱组白云岩或老堡组硅质岩中,顺层产出,受地层与褶皱的双重控制。矿区主干褶皱为一复式向斜,由2个次级向斜和1个次级背斜组成。从构造几何学、运动学角度,运用现代测试技术,对矿区的小构造、显微构造和组构进行构造分析后揭示,老堡褶皱构造的形成机制是以弯滑作用为主、兼具弯流作用的纵弯褶皱作用的产物。铅锌矿体主要赋存在褶皱的转折端虚脱部位及两翼滑移量较大的层间滑动破碎带中。