Synergistic influence of alloy grain size and Si content on the oxidation behavior of 9Cr−1Mo steel

The synergistic influence of prior-austenite grain size and silicon content of 9Cr–1Mo steel on the resistance to scale spallation has been studied in air at 773 K (for 500 hr) and 973 K (12 hr). Two steels, irrespective of their grain size and Si content, did not show spallation during oxidation at 773 K. Spallation occurred at 973 K, and fine-grain steels exhibited less spallation resistance than coarse-grain ones (in low-as well as high-Si steels). Among the four possible combinations of grain size ans Si content, the steel with low Si and fine grains showed least resistance to spallation, while the steel with high Si and coarse grains showed the best resistance. Spallation was found to initiate in the areas adjoining the oxide ridges formed at the alloy grain boundaries. Oxide scales at the ridges and within the grains were analyzed by scanning electron microscopy (SEM/EDX) and secondary-ion mass spectrometry (SIMS). These analyses suggest depletion of silicon from the areas adjoining grain boundaries, resulting in thicker scaling that triggers spallation in such areas. For similar grain-size materials, the necessary thickness for spallation was attained earlier with low-Si steel rather than in high-Si steel.     

计算机辅助声发射源检测定位系统

针对普通声发射（ＡＥ）检测仪缺乏源定位功能，开发了计算机辅助ＡＥ源检测定位系统，并详细论述了该系统的组成、接口、源定位算法和程序、剔除噪声等问题     

Preparation of flee-standing diamond films for high frequency SAW devices

Free-standing diamond films were prepared by hot filament chemical vapor deposition （HFCVD） method under different conditions. Inter-digital transducers （IDTs） were formed on the nucleation sides of free-standing diamond films by photolithography technique. Then piezoelectric ZnO films were deposited by radio-frequency（RF） reactive magnetron sputtering to obtain the ZnO/diamond film structures. Surface morphologies of the nucleation sides and the IDTs were characterized by means of scanning electron microscopy （SEM）, atomic force microscope （AFM） and optical microscopy. The results indicate that the surfaces of nucleation sides are very smooth and the IDTs are of high quality without discontinuity and short circuit phenomenon. Raman spectra show the sharp diamond feature peak at about 1 334 cmI and the small amount of non-diamond carbon in the nucleation side. X-ray diffraction （XRD） patterns of the structure of ZnO/diamond films show a strong diffraction peak of ZnO （002）, which indicates that as-sputtered ZnO films are highly c-axis oriented.     

EFFECT OF TOOL WEAR ON MICROSTRUCTURE, MECHANICAL PROPERTIES AND ACOUSTIC EMISSION OF FRICTION STIR WELDED 6061 Al ALLOY

Tool condition is one of the main concerns in friction stir welding （FSW）, because the geometrical condition of the tool pin including size and shape is strongly connected to the microstrueture and mechanical performance of the weld. Tool wear occurs during FSW, especially for welding metal matrix composites with large amounts of abrasive particles, and high melting point materials, which significantly expedite tool wear and deteriorate the mechanical performance of welds. Tools with different pin-wear levels are used to weld 6061 Al alloy, while acoustic emission （AE） sensing, metallographic sectioning, and tensile testing are employed to evaluate the weld quality in various tool wear conditions. Structural characterization shows that the tool wear interferes with the weld quality and accounts for the formation of voids in the nugget zone. Tensile test analysis of samples verifies that both the ultimate tensile strength and the yield strength are adversely affected by the formation of voids in the nugget due to the tool wear. The failure location during tensile test clearly depends on the state of the tool wear, which led to the analysis of the relationships between the structure of the nugget and tool wear. AE signatures recorded during welding reveal that the AE hits concentrate on the higher amplitudes with increasing tool wear. The results show that the AE sensing provides a potentially effective method for the on-line manitoring of tool wear.     

超声波处理对高碳钢凝固组织的影响

主要研究超声处理对高碳钢凝固组织的作用,分析了超声波功率水平、实验温度对凝固组织的影响。结果表明,超声处理可以明显细化高碳钢的凝固组织;随着超声功率的增加,组织细化程度提高,功率提高到一定程度,细化作用不再明显增强;超声处理效果与实验温度密切相关,温度较低时,树枝晶组织发达,温度为1570℃时,几乎完全转变为等轴晶组织。对高碳钢凝固过程进行超声处理时,起主要作用的是声空化、声流以及超声空化产生的局部高温。     

功率超声对Pb-Sn合金凝固行为的影响

研究了功率超声对铅锡合金凝固过程的影响,分析了其影响机制.结果表明,在功率超声作用下,声空化效应和声流效应使含铅5%的铅锡合金的凝固组织明显细化,并且经过功率600W的超声处理后,先析出相的析出温度升高3℃,凝固温度升高了5℃.随着超声功率的增加,合金组织的细化程度提高,但功率提高到一定程度时,细化作用减弱.     

电磁超声传感器检测不同材质钢管的试验研究

通过试验确定了不同材质钢管的磁致伸缩曲线，得到了不同材质钢管缺陷检测的电磁超声传感器（EMAT）直流电磁铁的励磁电流与超声波幅值的关系，确定了最佳励磁电流，并得出其变化规律与磁致伸缩曲线变化趋势一致的结论。为电磁超声传感器设计和开发提供了依据。     

声发射方法测定SiCw／Al复合材料的界面强度

对ＳｉＣｗ／Ａｌ复合材料形变断裂过程中的声发射（ＡＥ）特征的研究表明，用ＡＥ技术能准确测定ＳｉＣ纤维的断裂次数，并能测定其断枝长度，从而测定了纤维和基体间的界面强度和ＳｉＣ纤维的断裂强度。     

一种视频流畅度优先的带宽自适应方法

由于现有基于平均接收质量的带宽自适应方法,在自适应过程中会出现视频质量振荡,且在可用带宽急剧恶化时会出现中断的问题,提出了一种流畅度优先的带宽自适应方法。该方法引入了图着色优先级算法,在带宽自适应过程中,在保证视频的流畅播放的前提下,通过判断是否振荡调整,改变平均质量范围,以达到减少视频振荡次数的效果。仿真结果表明,该方法在自适应调整传输速率、有效利用带宽的同时,保证了流畅度并减少视频质量振荡,符合预期目标。     

基于Aqua-Sim的水声传感器网络MAC层协议分析

分析了水声传感器网络中MAC层协议的特点和分类.利用基于NS2的Aqua-Sim水声网络仿真模拟软件仿真了Broadcast MAC协议和R-MAC协议在五个节点的集中式拓扑结构的水声传感器网络中的传输过程,分析比较了两种协议在平均数据包延时、平均能量消耗以及平均吞吐量上的异同.得出在集中式拓扑结构的水声传感器子网中,Broadcast MAC协议更适合于要求较高吞吐量的应用环境,而R-MAC协议更适合于在能量消耗方面有严格要求的应用环境.