复合式连杆切边模设计

介绍了一种复合式连杆切边模,可在压力机一次行程过程中完成连杆的冲孔、切边和整形工序,该模具具有工作效率高、切边质量好等优点.     

Study on Design Techniques of a Long Life Hot Forging Die with Multi-Materials

A new design technique for the long life hot forging die has been proposed. By finite element analysis, the reason for the failure of hot forging die was analyzed and it was concluded that thermal stress is the main reason for the failure of hot forging die. Based on this conclusion, the whole hot forging die was divided into the substrate part and the heat-resistant part according to the thermal stress distribution. Moreover, the heat-resistant part was further subdivided into more zones and the material of each zone was reasonably selected to ensure that the hot forging die can work in an elastic state. When compared with the existing techniques, this design can greatly increase the service life because the use of multi-materials can alleviate the thermal stress in hot forging die.     

Investigations in the compaction and sintering of large ceramic parts

In this study, a large ceramic part was successfully compacted and sintered using uniaxial die compaction technique. The effects of die design, compaction pressure, lubrication, sintering procedure and part orientation in the oven on the P/M part quality were investigated and the preferred process conditions were discussed and concluded. The main quality issues encountered were cracking and distortion. A finite element model for the powder compaction process was also developed and validated. Based on the model, the relationship between the cracking location and the density distribution predicted from finite element analysis (FEA) was discussed.     

4Cr2MoWVNi与H11模具钢离子渗氮耐磨性能研究

对4Cr2MoWVNi和H11模具钢进行了对比磨损试验,研究了渗氮对两钢种耐磨性的影响.结果表明,无论试样渗氮与否,4Cr2MoWVNi钢的热耐磨性均优于H11钢.4Cr2MoWVNi钢连杆热锻模寿命优于H11钢.模具正常失效形式均为热磨损.     

RM-2热作模具钢淬火开裂原因分析

在制造热挤压模具的过程中,所用的模具钢RM-2在淬火过程中发生了淬火开裂.采用光学显微镜、成分分析和硬度测试等方法对淬裂的模具钢进行了检测与分析,对该模具钢的开裂原因进行了探讨.结果表明,热处理不当造成的模具表层产生粗大铁素体和低碳马氏体是导致其淬火开裂的主要原因;碳化物及氧化物夹杂的存在为裂纹扩展提供了有效路径.因此,RM-2模具钢在工业炉中进行淬火时要采取适当的保护措施,严格控制淬火工艺.     

高速级进冲压中废料回跳问题的解决方案

分析了高速级进冲压废料出现回跳现象的原因,并根据生产实践经验,从增大废料回跳阻力、使废料受到向下的外力、凸凹模刃口形式等方面,总结出了抑制废料回跳的措施.在保证废料不回跳的前提下,应充分考虑所用方法的经济性、模具的寿命长且易于维护,并根据模具工作的具体条件,选择相应的抑制废料回跳的方法或多种方法的综合运用来抑制废料回跳.     

基于Web的冲裁模CAD/CAM系统的关键技术及应用实例

对基于Web的冲裁模CAD/CAM系统WebCPD系统进行总体设计,给出了WebCPD系统的具体实现方法,介绍了WebCPD系统实现的关键技术,并以应用实例的形式说明使用WebCPD系统进行模具设计.     

电磁搅拌对压铸镁合金组织性能的影响

对5mm厚的压铸镁合金AZ91镁板进行电弧重熔过程中,外加纵向交流磁场。通过对重熔后试件进行力学性能和显微组织分析,研究磁场参数对AZ91组织和性能的影响规律,并对磁场作用机理进行研究。试验结果表明,外加纵向磁场通过旋转电弧对熔池进行搅拌,改变晶粒结晶过程,使重熔层中晶粒组织得到细化,进而使抗拉强度和硬度等性能得到改善,同时磁场的电磁搅拌作用可以净化液态镁合金(使杂质球化并弥散分布),促进气泡上浮,降低镁合金热裂纹敏感性,抑制热裂纹产生。     

前面罩工艺分析与拉深模设计

介绍了拖拉机前面罩零件生产工艺,利用零件的数学模型通过近似计算法,计算出了拉深工序拉深力和压边力大小,同时重点介绍了前面罩零件拉深模工艺分析及模具结构设计要点。该拉深模结构紧凑、制造简便、成本低、操作方便、生产效率高。     

精密级进模工作零件关联性设计研究

针对IT制件精密级进模工作零件设计非标准化问题,通过运用关联设计、面向对象方法和参数化技术建立了工作零件的特征结构模型和参数化驱动模型,并以AutoCAD2002为平台,开发出相应的CAD系统,实现了凸模、凹模镶块和卸料板镶块的关联性设计,提高了工作零件设计效率和质量。