裂化催化剂生产废水中悬浮物的去除试验

用配制的分别以阴离子聚丙烯酰胺、氯化铝和阳离子聚丙烯酰胺为主剂的三种絮凝剂对裂化催化剂生产废水进行絮凝研究,考察了絮凝剂的加入量、废水pH值和絮凝沉降时间对絮凝沉降效果的影响。试验结果表明:在一定的操作参数下,以阴离子聚丙烯酰胺为主剂絮凝剂的用量较少,效果最好。     

矿物质催化合成SP及SP-C

探索出一种以矿物质（橡胶填充剂）为催化剂合成ＳＰ及ＳＰ－Ｃ的新工艺。选择了最佳的工艺条件。此法制成的ＳＰ及ＳＰ－Ｃ产品性能优良、质量稳定。     

An evaluation of commercial nickel catalysts during hydrogenation of soybean oil

The activities of several commercial nickel catalysts were determined by measuring their activation energies. Among these catalysts, G95E, Resan 22, Nysosel 222 and 325, all with low activation energy, were more active than DM3 and G95H, which had higher activation energy. However, the less active catalysts increased the linoleate selectivity of soybean oil during hydrogenation. The yields of bothtrans isomers and winterized oil were higher for the more selectively hydrogenated oil catalyzed by the less active catalysts. In the sensory evaluation, the fractionated solid fat that contained moretrans isomers was lower in flavor scores than the fractionated liquid oil after hydrogenation and winterization of soybean oil.     

New catalyst systems for the polymerization of acetylene

The catalytic activities of WCI₆Ph₄Sn, MoCl₅Ph₄Sn and tetrabenzyltitanium were examined in the polymerization of acetylene. The structure, morphology and electrical conductivity of the doped and non doped polyacetylene were also studied.     

气相法聚乙烯高效催化剂的进展

综述了国内外气相法聚乙烯高效催化剂研究进展概况,以及各种新型高效催化剂制备技术和性能,并对开发我国新型高效推化剂提出了看法。     

Ag/CeO2-ZnO催化剂上甲醇部分氧化制氢气研究

研究了用于甲醇部分氧化制氢气反应的Ag/CeO2-ZnO催化剂的制备条件以及反应条件对催化剂性能的影响.Ag/CeO2-ZnO催化剂中银含量、焙烧温度、反应温度以及反应气的比例等对催化剂性能具有很大的影响.Ag/CeO2-ZnO催化剂的制备条件以及反应条件控制在一定范围内时,Ag/CeO2-ZnO催化剂对甲醇部分氧化制氢气具有很高的催化活性与选择性.     

杂多酸固相催化合成麝香DDHI的研究

以杂多酸为催化剂 ,2 ,6 二异丙基酚 (DIPP)与异戊二烯 (IP)经环烷基化反应合成麝香DDHI。研究了催化剂种类和用量、原料配比、反应温度及时间对反应结果的影响。反应最佳条件为∶催化剂为磷钨酸固载于活性炭上 ,n(DIPP)∶n(IP) =2 .0 ,m(C1)∶m(IP) =0 .8～ 0 .9,反应温度 36℃～ 4 2℃ ,滴加时间 2h ,保温时间 1h ,产品收率 83.7%。     

浅谈环保型助溶剂丙二醇醚的现况与应用

简要介绍了丙二醇醚国内外现状以及丙二醇醚的环保性评价和用途。     

DQ型高效催化剂在环管PP装置上的应用

介绍了使用DQ型球形高效催化剂在上海石油化工股份有限公司塑料事业部70kt/a环管连续法工业聚丙烯生产装置上应用研究的结果，并对结果进行了讨论。     

Unipol气相法聚烯烃液体催化剂技术进展

介绍了Unipol气相法聚烯烃工艺液体催化剂的成分、加入反应器的方式和喷嘴结构及控制催化剂液滴尺寸方法等方面的最新进展情况。